1/2" x 5" Strong-Tie THD50500HMG Titen HD Screw Anchor, Galvanized, Pkg 20
1/2" x 5" Strong-Tie THD50500HMG Titen HD Screw Anchor, Galvanized, Pkg 20
Description:
Description:
Titen HD screw anchors are high-strength anchors designed to be quickly and easily installed in cracked and uncracked concrete as well as uncracked masonry. Mechanical galvanizing meets ASTM B695, Class 65, Type 1. These screw anchors are intended for exterior applications and some interior pressure-treated wood sill plate applications. Titen HD anchors be used in a variety of applications including sill plates, ledgers, post bases, seating, and other holdown applications. They are also easily removable for temporary applications. All Titen HD screw anchors feature a patented thread design with serrated cutting teeth for easy installation.
Specifications:
Specifications:
Fixture hole size: 5/8"-11/16"
Drill bit size: 1/2"
Quantity: 20
Head type: Hex Head
Finish: Galvanized
Diameter: 1/2"
Length: 5"
Manufacturer name: Simpson Strong-Tie
Product Guide: View Spec Sheet
Stay in touch
This is a dummy newsletter form so don't bother trying to test it. Not that I expect you to, anyways. :)
As with most Simpson products, this is excellent quality hardware . However, you really need to be sure to get all the concrete drilling fines out of the hole before installation of the screw. If you experience an increasingly higher tourqe value (> 80 ft lbs) before full engagement you probably will need to remove fastener and clean out more residual fines.
The process from Fasterners Plus could not have been easier. The order arrived in about three days. The box comes with a basic installation guide. lease be sure to read and follow the guide. The specifics of the measurements and requirements of the spacing to insure that the installation meets the Simpson specifications in order to fulfill Simpson's load capacities are not included in the box. The Simpson webpage has has a plethora of downloadable resources to include the general product sheets and technical data sheets. Just enter THD50500HMG in the webpage's search bar. It was not difficult nor onerous to locate and follow the installation requirements.
I installed several deck ledger boards to my 6" deep poured concrete foundation. I am pleased with the ease and outcome.
The product is hearty works as advertised in the numerous videos in which the products appear. I elected to experiment by installing a few of the Titen HD screws using a old school 3/4" drive ratchet and socket. As one might imagine it took some effort. The rest I installed with an impact driver. The latter was effortless. Both set in place equally well and seem to offer the connection I was looking for. The impact driver makes the installation easier but it is not necessary.
Worked as expected, works with standard 1/2" masonry bit.
- Choosing a selection results in a full page refresh.
- Opens in a new window.