You are false away from free shipping

Simpson CSD25312 1/4" X 3-1/2" Countersunk Head Split-Drive Anchor - Zinc, Pkg 100

$33.84
SKU: CSD25312
(0) No Reviews yet
QuantityUnit PriceSave
$33.84
Ships Today when you order in the next 6 hrs 10 mins
Details

The Split-Drive anchor is a one-piece expansion anchor that can be installed in concrete, grout-filled block and stone. As the anchor is driven in, the split-type expansion mechanism on the working end compresses and exerts force against the walls of the hole. The Countersunk head allows for a smooth surface when attaching wood or light gauge steel to concrete and grout-filled block surfaces.
Installation:

  • For Common Rafters:
  • Drill a hole in base material using a 1/4"-diameter carbide-tipped drill. Drill hole to specified embedment depth and blow clean using compressed air. (Overhead installation need not be blown clean.) Alternatively, drill hole deep enough to accommodate embedment depth and dust from drilling. Position fixture and insert split-drive anchor through fixture hole.
  • For CSD, 3/8"-diameter fixture hole is recommended for hard fixtures such as steel. For DSD, 5/16"-diameter fixture hole is recommended.
  • Drive anchor until head is flush against fixture.

  • California Residents: WARNING

    Specifications

    Diameter:1/4"
    Length:3-1/2"
    Drill Bit Size:1/4"
    Material:Carbon Steel
    Finish:Zinc
    For Use With Treated Lumber:yes
    Head Type:Countersunk Head
    Manufacturer Name:Simpson Strong-Tie
    Quantity:100
    Product Guide Document:View Spec Sheet

The Split-Drive anchor is a one-piece expansion anchor that can be installed in concrete, grout-filled block and stone. As the anchor is driven in, the split-type expansion mechanism on the working end compresses and exerts force against the walls of the hole. The Countersunk head allows for a smooth surface when attaching wood or light gauge steel to concrete and grout-filled block surfaces.
Installation:
  • For Common Rafters:
  • Drill a hole in base material using a 1/4"-diameter carbide-tipped drill. Drill hole to specified embedment depth and blow clean using compressed air. (Overhead installation need not be blown clean.) Alternatively, drill hole deep enough to accommodate embedment depth and dust from drilling. Position fixture and insert split-drive anchor through fixture hole.
  • For CSD, 3/8"-diameter fixture hole is recommended for hard fixtures such as steel. For DSD, 5/16"-diameter fixture hole is recommended.
  • Drive anchor until head is flush against fixture.

  • California Residents: WARNING

Diameter:1/4"
Length:3-1/2"
Drill Bit Size:1/4"
Material:Carbon Steel
Finish:Zinc
For Use With Treated Lumber:yes
Head Type:Countersunk Head
Manufacturer Name:Simpson Strong-Tie
Quantity:100
Product Guide Document:View Spec Sheet

Ratings & Reviews

No reviews available

Be the first to Write a Review