You are false away from free shipping

Simpson HSURC410 4x10 Concealed Flange Joist Hanger Skewed Right - Galvanized

$31.48
Save 20%
$25.18
SKU: HSURC410
(0) No Reviews yet
QuantityUnit PriceSave
$31.48
Save 20%
$25.18
Made To Order
Standard Lead Time 3-5 days.
Details

  • This item is made to order with varied lead times - Please call us at 888-794-1590 for exact lead times on this product
  • Simpson Strong-Tie HSURC joist hangers are skewed 45 degrees right and utilize angled nail slots to direct nails for proper installation. A concealed flange on one side of the hanger provides a cleaner looking installation. The Strong-Tie HSURC410 skewed joist hanger features a G90 galvanized coating and requires the use of hot-dip galvanized fasteners which meet the specifications of ASTM A153.


    Installation:
    • Use all specified fasteners.
    • These hangers will normally accommodate a 40° to 50° skew.
    • Illustration shows left and right skews SUR/L (SUR=skewed right; SUL=skewed left).
    • The joist end may be square cut or bevel cut.

    NOTE: The correct fasteners installed in the correct position must be used to achieve published load values


    California Residents: WARNING

    Specifications

    Joist Size:4X10
    Height:8-1/2"
    Thickness:14 Gauge
    Finish:G90 Galvanized
    For Use With Treated Lumber:no
    Manufacturer Name:Simpson Strong-Tie
    Product Guide Document:View Spec Sheet
    Fasteners Required:Face - (20) 0.162" x 3-1/2" Nails
    Joist - (6) 0.162" x 3-1/2" Nails

  • This item is made to order with varied lead times - Please call us at 888-794-1590 for exact lead times on this product
  • Simpson Strong-Tie HSURC joist hangers are skewed 45 degrees right and utilize angled nail slots to direct nails for proper installation. A concealed flange on one side of the hanger provides a cleaner looking installation. The Strong-Tie HSURC410 skewed joist hanger features a G90 galvanized coating and requires the use of hot-dip galvanized fasteners which meet the specifications of ASTM A153.


    Installation:
    • Use all specified fasteners.
    • These hangers will normally accommodate a 40° to 50° skew.
    • Illustration shows left and right skews SUR/L (SUR=skewed right; SUL=skewed left).
    • The joist end may be square cut or bevel cut.

    NOTE: The correct fasteners installed in the correct position must be used to achieve published load values


    California Residents: WARNING

    Joist Size:4X10
    Height:8-1/2"
    Thickness:14 Gauge
    Finish:G90 Galvanized
    For Use With Treated Lumber:no
    Manufacturer Name:Simpson Strong-Tie
    Product Guide Document:View Spec Sheet
    Fasteners Required:Face - (20) 0.162" x 3-1/2" Nails
    Joist - (6) 0.162" x 3-1/2" Nails

    Ratings & Reviews

    No reviews available

    Be the first to Write a Review