Simpson Strong-Tie CB Column bases are a sturdy cast-in place anchor that are designed for heavy duty column loads. The Strong-Tie CB1212 features a standard Gray Painted coating for added corrosion resistance.

• Use all specified fasteners.
• For full loads, minimum side cover required is 3" for CB, 2" for LCB.
• Install all models with bottom of base plate flush with concrete.
• Post bases do not provide adequate resistance to prevent members from rotating about the base and therefore are not recommended for non top-supported installations (such as fences or unbraced carports).

NOTE: The correct fasteners installed in the correct position must be used to achieve published load values

Looking for something different? See the rest of our Simpson CB & LCB Column Bases.

California Residents: WARNING

-Use all specified fasteners.
-For full loads, minimum side cover required is 3" for CB, 2" for LCB.
-Install all models with bottom of base plate flush with concrete.
-Post bases do not provide adequate resistance to prevent members from rotating about the base and therefore are not recommended for non top-supported installations (such as fences or unbraced carports).