Shop more Split-Drive Anchors
SKU: CSD25112
Simpson CSD25112 1/4" X 1-1/2" Countersunk Head Split-Drive Anchor - Zinc, Pkg 100
Simpson CSD25112 1/4" X 1-1/2" Countersunk Head Split-Drive Anchor - Zinc, Pkg 100
No reviews
Regular price
$22.48
Sale price
$22.48
Regular price
Unit price
/
per
0% off
Ships today when you order in the next
1 hour
58 minutes
Request Bulk Pricing
Fill out the form below or give our sales consultants a call at 888-794-1590.
Description:
Description:
The Split-Drive anchor is a one-piece expansion anchor that can be installed in concrete, grout-filled block and stone. As the anchor is driven in, the split-type expansion mechanism on the working end compresses and exerts force against the walls of the hole. The Countersunk head allows for a smooth surface when attaching wood or light gauge steel to concrete and grout-filled block surfaces.
Installation:
Installation:
- For Common Rafters:
- Drill a hole in base material using a 1/4"-diameter carbide-tipped drill. Drill hole to specified embedment depth and blow clean using compressed air. (Overhead installation need not be blown clean.) Alternatively, drill hole deep enough to accommodate embedment depth and dust from drilling. Position fixture and insert split-drive anchor through fixture hole.
- For CSD, 3/8"-diameter fixture hole is recommended for hard fixtures such as steel. For DSD, 5/16"-diameter fixture hole is recommended.
- Drive anchor until head is flush against fixture.
California Residents: WARNING
Specifications:
Specifications:
Material: Carbon Steel
Drill bit size: 1/4"
Quantity: 100
Head type: Countersunk Head
Diameter: 1/4"
Length: 1-1/2"
Manufacturer name: Simpson Strong-Tie
For Treated Lumber: Yes
Product Guide: View Spec Sheet
Drill bit size: 1/4"
Quantity: 100
Head type: Countersunk Head
Diameter: 1/4"
Length: 1-1/2"
Manufacturer name: Simpson Strong-Tie
For Treated Lumber: Yes
Product Guide: View Spec Sheet
Installation
Installation
-For Common Rafters:
-Drill a hole in base material using a 1/4"-diameter carbide-tipped drill. Drill hole to specified embedment depth and blow clean using compressed air. (Overhead installation need not be blown clean.) Alternatively, drill hole deep enough to accommodate embedment depth and dust from drilling. Position fixture and insert split-drive anchor through fixture hole.
-For CSD, 3/8"-diameter fixture hole is recommended for hard fixtures such as steel. For DSD, 5/16"-diameter fixture hole is recommended.
-Drive anchor until head is flush against fixture.
Stay in touch
This is a dummy newsletter form so don't bother trying to test it. Not that I expect you to, anyways. :)
Shop more Split-Drive Anchors
×
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects and other reproductive harm. For more information visit: www.P65Warnings.ca.gov.
- Choosing a selection results in a full page refresh.
- Opens in a new window.