Shop more SBR/DBR Spacer Bracers
SKU: DBR/30-R680
Simpson DBR/30-R680 Spacer Bracers - G90 Galvanized, Pkg 680
Simpson DBR/30-R680 Spacer Bracers - G90 Galvanized, Pkg 680
No reviews
Regular price
$2,033.03
Sale price
$2,033.03
Regular price
Unit price
/
per
0% off
Ships today when you order in the next
1 hour
38 minutes
Request Bulk Pricing
Fill out the form below or give our sales consultants a call at 888-794-1590.
Description:
Description:
Simpson Strong-Tie introduces the DBR spacer bracers for cold-formed steel construction. These spacer bracers reduce the installed cost of cold-formed steel stud walls by enabling faster stud layout while minimizing the need for bridging clips. The DBR is used for interior walls to eliminate stud bow and allow for quicker drywall attachment, and are designed to connect to 2-1/2", 3-5/8", and 6" studs in various thicknesses from 20 gauge to 25 gauge. Provides bracing along the length of the stud, and for head-of-wall slip conditions. The DBR also comes with prepunched slots that eliminate the need to use bridging clips with on-module studs. The DBR spacer bracers come with bracing load data based on assembly testing, thus mitigating risk for designers and maximizing confidence in design specs. In fact, the DBR are the only spacer bracers on the market with tabulated design values based on assembly tests, making it one of Simpson Strong-Tie's newest, most trusted products!
Installation:
Installation:
- Spacer bracers are fed through the stud knockout at a 90° angle until studs align with spacer-bracer slots. With the slots engaging the stud web, the spacer bracer is then rotated back to the flat position so the slotted flanges are on the bottom.
- For off-layout or end-of-run studs where a spacer-bracer slot does not engage a stud, manually snip the spacer-bracer flanges with a 1/2"-deep slot and secure the spacer bracer to the stud with Simpson Strong-Tie LSSC or RCA connectors. Use all specified fasteners.
- Wear gloves while handling and installing spacer bracers.
California Residents: WARNING
Specifications:
Specifications:
Material: Carbon Steel
Manufacturer name: Simpson Strong-Tie
For Treated Lumber: No
Product Guide: View Spec Sheet
Manufacturer name: Simpson Strong-Tie
For Treated Lumber: No
Product Guide: View Spec Sheet
Installation
Installation
-Spacer bracers are fed through the stud knockout at a 90° angle until studs align with spacer-bracer slots. With the slots engaging the stud web, the spacer bracer is then rotated back to the flat position so the slotted flanges are on the bottom.
-For off-layout or end-of-run studs where a spacer-bracer slot does not engage a stud, manually snip the spacer-bracer flanges with a 1/2"-deep slot and secure the spacer bracer to the stud with Simpson Strong-Tie LSSC or RCA connectors.
-Use all specified fasteners.
-Wear gloves while handling and installing spacer bracers.
Stay in touch
This is a dummy newsletter form so don't bother trying to test it. Not that I expect you to, anyways. :)
Shop more SBR/DBR Spacer Bracers
×
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects and other reproductive harm. For more information visit: www.P65Warnings.ca.gov.
- Choosing a selection results in a full page refresh.
- Opens in a new window.