Simpson ECCQ106SDS2.5 End Column Cap w/SDS Screws - Gray Paint - Non-Returnable - Non-Returnable
Simpson ECCQ106SDS2.5 End Column Cap w/SDS Screws - Gray Paint - Non-Returnable - Non-Returnable
Ships in 2-3 business days.
Description:
Description:
Simpson Strong-Tie ECCQ End Column caps provide a high-capacity connection for column-beam combinations. This design uses Simpson Strong-Tie Strong-Drive SDS Heavy-Duty Connector screws to provide faster installation and provides a greater net section area of the column compared to bolts. The SDS screws provide for a lower profile compared to standard through bolts. The Strong-Tie ECCQ5-4HDG-SDS post base features a Gray Paint finish for added corrosion resistance and requires the use of hot-dip galvanized fasteners which meet the specifications of ASTM A153.
Installation:- Install 1/4"x2 1/2" Strong-Drive SDS Heavy-Duty Connector screws, which are provided with the column cap. (Lag screws will not achieve the same load.)
- CCOQ and ECCOQ column cap only (no straps) may be ordered for field-welding to pipe or other columns. Dimensions are same as CCQ and ECCQ.
- For rough-cut lumber sizes, provide dimensions. An optional W2 dimension may be specified with any column size given. (Note that the W2 dimension on straps rotated 90° is limited by the W1 dimension.)
NOTE: The correct fasteners installed in the correct position must be used to achieve published load values
Looking for something different? See the rest of our Simpson ECCQ End Column Caps.
California Residents: WARNING
Specifications:
Specifications:
Post Size: 4X
Height: 7"
Fasteners required: Beam - (14) 1/4" x 2 -1/2" SDS Screws; Post - (14) 1/4" x 2-1/2" SDS Screws
Thickness: 3 Gauge
Quantity: 1
Finish: Gray Paint
Length: 8-1/2"
Manufacturer name: Simpson Strong-Tie
For Treated Lumber: No
Beam size: 5-1/8"
Additional information:
Width (1): 5-1/4"
Width (2): 3-5/8"
Product Guide: View Spec Sheet
Features
Features
•The SDS screws provide a lower profile than standard through bolts
•Certified welds for confidence in strength and loading
•Uplift loads have been increased for earthquake or wind loading
•Diamond holes for temporary fastening
Installation
Installation
•Fasten with 1/4" x 2 1/2" Strong-Drive SDS Heavy-Duty Connector screws, which are provided with the column cap. (Lag screws will not achieve the same load.) Use stainless-steel Strong-Drive screws with stainless-steel connectors.
•For rough-cut lumber sizes, provide dimensions. An optional W2 dimension may be specified with any column size given. (Note that the W2 dimension on straps rotated 90° is limited by the W1 dimension.)
Stay in touch
This is a dummy newsletter form so don't bother trying to test it. Not that I expect you to, anyways. :)
- Choosing a selection results in a full page refresh.
- Opens in a new window.