You are false away from free shipping

Simpson H10AZ Hurricane Tie - Zmax Finish

$2.79
SKU: H10AZ
(0) No Reviews yet
QuantityUnit PriceSave
$2.79
Ships Dec 9 when you order now.
Details

Simpson Strong-Tie H series of hurricane ties provide a positive connection between truss/rafter and the wall of the structure to resist wind and seismic forces. The Strong-Tie H10AZ Hurricane Tie features a G185 ZMAX galvanized finish for added corrosion resistance and requires the use of hot-dip galvanized fasteners which meet the specifications of ASTM A153.


Installation:
  • Use all specified fasteners.
  • Use hot-dip galvanized (HDG) nails with ZMAX and HDG connector products. Use Type 316 stainless-steel nails with our stainless-steel connector products.
  • Hurricane ties do not replace solid blocking.
  • When installing ties on plated trusses (on the side opposite the truss plate) do not fasten through the truss plate from behind. This can force the truss plate off of the truss and compromise truss performance.
  • H10A optional nailing to connect shear blocking, use 8d nails. Slots allow maximum field bending up to a pitch of 6:12, use H10A sloped loads for field bent installation.

NOTE: The correct fasteners installed in the correct position must be used to achie(more...)

California Residents: WARNING

Specifications

Thickness:18 Gauge
Finish:ZMAX
For Use With Treated Lumber:yes
Manufacturer Name:Simpson Strong-Tie
Product Guide Document:View Spec Sheet
Fasteners Required:To Rafters/Truss - (9) 0.148" x 1-1/2" Nails
Top Plates - (9) 0.148" x 1-1/2" Nails

Simpson Strong-Tie H series of hurricane ties provide a positive connection between truss/rafter and the wall of the structure to resist wind and seismic forces. The Strong-Tie H10AZ Hurricane Tie features a G185 ZMAX galvanized finish for added corrosion resistance and requires the use of hot-dip galvanized fasteners which meet the specifications of ASTM A153.


Installation:
  • Use all specified fasteners.
  • Use hot-dip galvanized (HDG) nails with ZMAX and HDG connector products. Use Type 316 stainless-steel nails with our stainless-steel connector products.
  • Hurricane ties do not replace solid blocking.
  • When installing ties on plated trusses (on the side opposite the truss plate) do not fasten through the truss plate from behind. This can force the truss plate off of the truss and compromise truss performance.
  • H10A optional nailing to connect shear blocking, use 8d nails. Slots allow maximum field bending up to a pitch of 6:12, use H10A sloped loads for field bent installation.

NOTE: The correct fasteners installed in the correct position must be used to achie(more...)

California Residents: WARNING

Thickness:18 Gauge
Finish:ZMAX
For Use With Treated Lumber:yes
Manufacturer Name:Simpson Strong-Tie
Product Guide Document:View Spec Sheet
Fasteners Required:To Rafters/Truss - (9) 0.148" x 1-1/2" Nails
Top Plates - (9) 0.148" x 1-1/2" Nails

Ratings & Reviews

No reviews available

Be the first to Write a Review