Skip to product information
1 of 7
Shop more Helical Wall Ties
SKU: HELI371000A

Simpson HELI371000A Heli-Tie 3/8" x 10" Helical Wall tie, Pkg 50

Simpson HELI371000A Heli-Tie 3/8" x 10" Helical Wall tie, Pkg 50

Regular price $269.13
Sale price $269.13 Regular price $299.03
10% off
shipping truck, lead time icon
Ships today when you order in the next 6 hours 56 minutes

Description:

The Simpson Strong-Tie Heli-Ties are designed to anchor building facades to structural members such as concrete block. These helical wall ties are made from 304 stainless steel for a long lasting service life and excellent corrosion resistance. The helical design makes installation quick into the predrilled pilot hole. An SDS-Plus rotohammer along with the proprietary HELITOOL37A Installation Tool.


Installation:
  • Drill pilot hole through the façade material and into the backup material to the specified embedment depth + 1" using appropriate drill bit(s) in the chart below. Drill should be in rotation-only mode when drilling into soft masonry or into hollow backing material.
  • Position blue end of the Heli-Tie™ fastener in the installation tool and insert the tie into the pilot hole.
  • With the SDS-plus rotohammer in hammer mode, drive the tie until the tip of the installation tool enters the exterior surface of the masonry and countersinks the tie below the surface. Patch the hole in the façade with a matching masonry hanger.

California Residents: WARNING

Specifications:

Material: 304 Stainless Steel
Drill bit size: 7/32" or 1/4"
Diameter: 3/8"
Length: 10"
Manufacturer name: Simpson Strong-Tie
For Treated Lumber: No
Product Guide: View Spec Sheet

Installation

-Drill pilot hole through the façade material and into the backup material to the specified embedment depth + 1" using appropriate drill bit(s) in the chart below. Drill should be in rotation-only mode when drilling into soft masonry or into hollow backing material.
-Position blue end of the Heli-Tie™ fastener in the installation tool and insert the tie into the pilot hole.
-With the SDS-plus rotohammer in hammer mode, drive the tie until the tip of the installation tool enters the exterior surface of the masonry and countersinks the tie below the surface. Patch the hole in the façade with a matching masonry hanger.

View full details
Shop more Helical Wall Ties
× WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects and other reproductive harm. For more information visit: www.P65Warnings.ca.gov.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)