You are false away from free shipping

Simpson ZN18078 3/16" X 7/8" Zinc Nailon Pin Drive Anchor - Zinc, Pkg 100

$14.00
SKU: ZN18078
(0) No Reviews yet
QuantityUnit PriceSave
$14.00
Ships Today when you order in the next 8 hrs 53 mins
Details

Zinc Nailon anchors are low-cost, mushroom head anchors for applications under static loads. The anchors are easily installed by hitting a hammer on the head that drives the pin through the anchor, expanding the body of the anchor to hold it in place. Ideal for use in concrete, CMU, brick, and other base materials. Pin and head configuration is designed to make anchor tamper-resistant. This product is not for use in overhead applications.
Installation:

  • Drill a hole in base material using a carbide drill bit the same diameter as the nominal diameter of the anchor to be installed. Drill the hole to specified embedment depth, plus 1/4" for pin extension, and blow hole clean using compressed air. Alternatively, drill the hole deep enough to accommodate embedment depth and dust from drilling.
  • Position fixture and insert Nailon anchor.
  • Tap with hammer until flush with fixture, then drive pin until flush with top of head.

  • California Residents: WARNING

    Specifications

    Diameter:3/16"
    Length:7/8"
    Drill Bit Size:3/16"
    Material:Carbon Steel
    For Use With Treated Lumber:yes
    Manufacturer Name:Simpson Strong-Tie
    Quantity:100
    Product Guide Document:View Spec Sheet

Zinc Nailon anchors are low-cost, mushroom head anchors for applications under static loads. The anchors are easily installed by hitting a hammer on the head that drives the pin through the anchor, expanding the body of the anchor to hold it in place. Ideal for use in concrete, CMU, brick, and other base materials. Pin and head configuration is designed to make anchor tamper-resistant. This product is not for use in overhead applications.
Installation:
  • Drill a hole in base material using a carbide drill bit the same diameter as the nominal diameter of the anchor to be installed. Drill the hole to specified embedment depth, plus 1/4" for pin extension, and blow hole clean using compressed air. Alternatively, drill the hole deep enough to accommodate embedment depth and dust from drilling.
  • Position fixture and insert Nailon anchor.
  • Tap with hammer until flush with fixture, then drive pin until flush with top of head.

  • California Residents: WARNING

Diameter:3/16"
Length:7/8"
Drill Bit Size:3/16"
Material:Carbon Steel
For Use With Treated Lumber:yes
Manufacturer Name:Simpson Strong-Tie
Quantity:100
Product Guide Document:View Spec Sheet

Ratings & Reviews

No reviews available

Be the first to Write a Review