{"title":"LUS\/LU\/U Light Duty Face Mount Joist Hangers","description":"\u003ch2\u003eLUS\/LU\/U Face Mount Joist Hangers – Reliable Connections for Everyday Framing\u003c\/h2\u003e\n\u003cp\u003eThe Simpson Strong-Tie LUS, LU and U Face Mount Hangers cover the everyday end of solid sawn joist hanging: light to standard-duty connections for deck framing, floor joists, and general residential construction. Each series solves a slightly different problem, so picking the right one comes down to what your project needs.\u003c\/p\u003e\n\n\u003ch3\u003eLUS, LU, and U: What's the Difference?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLUS\u003c\/strong\u003e hangers use double-shear nailing, which spreads the load across two points on each joist nail. That means fewer nails, faster installs, and higher allowable loads than a standard hanger of the same size. A solid pick when you want more capacity without stepping up to a heavier connector.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLU\u003c\/strong\u003e hangers are value-engineered: precision-formed for an easy install at a lower cost, built for light-duty framing where double-shear capacity isn't needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eU\u003c\/strong\u003e hangers are Simpson's standard, general-purpose face mount hanger. Flexible fastener options and tested allowable loads for straightforward joist-to-header connections.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eKey Features \u0026amp; Benefits:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble-Shear Nailing (LUS):\u003c\/strong\u003e Distributes load through two points per nail for greater strength with fewer fasteners.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eValue-Engineered Design (LU):\u003c\/strong\u003e Economical, precision-formed hangers for light-duty applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Versatility (U):\u003c\/strong\u003e Flexible fastener selection for everyday joist-to-header installs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGalvanized Finish:\u003c\/strong\u003e Standard G90 galvanized, with select LUS sizes available in ZMAX or stainless steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolid Sawn Compatible:\u003c\/strong\u003e Sized for standard dimensional lumber, from 2x4 up through 6x10, including rough-cut and multi-ply (double\/triple) options.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation Guide for LUS\/LU\/U Hangers\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003ePosition the hanger against the header or beam at the correct height for your joist.\u003c\/li\u003e\n\u003cli\u003eFasten the hanger to the header using the fasteners specified for that model. LUS hangers use double-shear nailing, so don't bend or remove the nailing tabs.\u003c\/li\u003e\n\u003cli\u003eSet the joist into the hanger and fasten through the joist flanges.\u003c\/li\u003e\n\u003cli\u003eFill every specified fastener hole to reach the hanger's full rated load.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eFind the Right Hanger for Your Project\u003c\/h3\u003e\n\u003cp\u003eNot sure whether LUS, LU, or U is the right fit? If your span or load calls for more than a standard connection, LUS is usually the better value before jumping to a heavy-duty hanger. For lighter joists and tighter budgets, LU keeps things simple. Need something outside this range, like solid sawn timber sizes, I-joists, or SCL? Browse our full lineup of \u003ca href=\"\/collections\/joist-hangers\"\u003eSimpson Joist Hangers\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eYou Might Also Be Interested In:\u003c\/h3\u003e\n\u003cp\u003eRound out your order with the right fasteners. Check out \u003ca href=\"\/collections\/joist-hanger-nails\"\u003eJoist Hanger Nails\u003c\/a\u003e or \u003ca href=\"\/collections\/connector-screws\"\u003eConnector Screws\u003c\/a\u003e to get the rated capacity these hangers are built for.\u003c\/p\u003e","products":[{"product_id":"simpson-4-5-8x11-1-4-face-mount-i-joist-hanger-g90-galvanized_2","title":"Simpson Strong-Tie U3512-2 Face Mount I-Joist Hanger- G90 Galvanized","description":"\u003cp\u003eThe Simpson Strong-Tie U Face-Mount Joist Hanger is designed to provide strong, stable, and secure connections for wood framing applications. Whether you're working with solid sawn lumber or engineered wood, this hanger ensures proper load distribution, helping to maintain structural integrity over time. Its precision-engineered design delivers a tight fit and maximum bearing, reducing the risk of joist rotation or misalignment.\u003c\/p\u003e\n\u003cp\u003eCrafted from high-quality galvanized steel, the U hanger provides exceptional corrosion resistance for long-lasting durability in a variety of indoor and outdoor projects. With its versatile face-mount design, this joist hanger is ideal for residential, commercial, and industrial framing applications.\u003c\/p\u003e\n\u003ch3\u003eKey Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Compatibility:\u003c\/strong\u003e Designed for both solid sawn lumber and engineered wood joists, ensuring a secure connection in various framing applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace-Mount Design:\u003c\/strong\u003e Offers easy installation with a flush, secure connection to the supporting member.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized Load Distribution:\u003c\/strong\u003e Provides full bearing support, helping to prevent twisting or shifting under load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGalvanized Steel Construction:\u003c\/strong\u003e Enhances corrosion resistance, making it suitable for interior and protected exterior applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Engineering:\u003c\/strong\u003e Manufactured for tight tolerances and a snug fit, reducing the need for field adjustments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse nails, screws, or Strong-Drive \u003ca rel=\"noopener\" href=\"https:\/\/www.fastenersplus.com\/collections\/simpson-sds-heavy-duty-connector-screws\" target=\"_blank\"\u003eSDS Heavy-Duty Connector screws\u003c\/a\u003e as specified for the application. Always refer to local building codes and manufacturer guidelines.\u003c\/li\u003e\n\u003cli\u003eThe joist should be fully seated in the hanger to achieve maximum bearing support.\u003c\/li\u003e\n\u003cli\u003eInstall fasteners into all available nail holes for optimal strength and stability.\u003c\/li\u003e\n\u003cli\u003eEnsure that the selected hanger meets the required load capacity for your specific application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeck Framing:\u003c\/strong\u003e Secures joists to beams, ensuring a stable and long-lasting deck structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloor Joists:\u003c\/strong\u003e Supports floor framing systems in residential and commercial buildings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoof Framing:\u003c\/strong\u003e Provides strong connections for rafters and ceiling joists, preventing misalignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePergolas \u0026amp; Outdoor Structures:\u003c\/strong\u003e Helps maintain stability and load distribution in exposed wood-framed designs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeneral Wood Construction:\u003c\/strong\u003e Ideal for interior and exterior framing applications requiring a secure joist-to-beam connection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eNOTE: The correct fasteners installed in the correct position must be used to achieve published load values\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCalifornia Residents: \u003ca style=\"color: black;\" href=\"\/prop-65\" target=\"_blank\"\u003eWARNING\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":34273535688840,"sku":"U3512-2","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/8644\/4936\/products\/U3512-2.01.jpg?v=1594747317"},{"product_id":"simpson-4-5-8x9-1-4-face-mount-i-joist-hanger-g90-galvanized_2","title":"Simpson Strong-Tie U3510-2 Face Mount I-Joist Hanger- G90 Galvanized","description":"\u003cp\u003eThe Simpson Strong-Tie U Face-Mount Joist Hanger is designed to provide strong, stable, and secure connections for wood framing applications. Whether you're working with solid sawn lumber or engineered wood, this hanger ensures proper load distribution, helping to maintain structural integrity over time. Its precision-engineered design delivers a tight fit and maximum bearing, reducing the risk of joist rotation or misalignment.\u003c\/p\u003e\n\u003cp\u003eCrafted from high-quality galvanized steel, the U hanger provides exceptional corrosion resistance for long-lasting durability in a variety of indoor and outdoor projects. With its versatile face-mount design, this joist hanger is ideal for residential, commercial, and industrial framing applications.\u003c\/p\u003e\n\u003ch3\u003eKey Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Compatibility:\u003c\/strong\u003e Designed for both solid sawn lumber and engineered wood joists, ensuring a secure connection in various framing applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace-Mount Design:\u003c\/strong\u003e Offers easy installation with a flush, secure connection to the supporting member.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized Load Distribution:\u003c\/strong\u003e Provides full bearing support, helping to prevent twisting or shifting under load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGalvanized Steel Construction:\u003c\/strong\u003e Enhances corrosion resistance, making it suitable for interior and protected exterior applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Engineering:\u003c\/strong\u003e Manufactured for tight tolerances and a snug fit, reducing the need for field adjustments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse nails, screws, or Strong-Drive \u003ca rel=\"noopener\" href=\"https:\/\/www.fastenersplus.com\/collections\/simpson-sds-heavy-duty-connector-screws\" target=\"_blank\"\u003eSDS Heavy-Duty Connector screws\u003c\/a\u003e as specified for the application. Always refer to local building codes and manufacturer guidelines.\u003c\/li\u003e\n\u003cli\u003eThe joist should be fully seated in the hanger to achieve maximum bearing support.\u003c\/li\u003e\n\u003cli\u003eInstall fasteners into all available nail holes for optimal strength and stability.\u003c\/li\u003e\n\u003cli\u003eEnsure that the selected hanger meets the required load capacity for your specific application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeck Framing:\u003c\/strong\u003e Secures joists to beams, ensuring a stable and long-lasting deck structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloor Joists:\u003c\/strong\u003e Supports floor framing systems in residential and commercial buildings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoof Framing:\u003c\/strong\u003e Provides strong connections for rafters and ceiling joists, preventing misalignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePergolas \u0026amp; Outdoor Structures:\u003c\/strong\u003e Helps maintain stability and load distribution in exposed wood-framed designs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeneral Wood Construction:\u003c\/strong\u003e Ideal for interior and exterior framing applications requiring a secure joist-to-beam connection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eNOTE: The correct fasteners installed in the correct position must be used to achieve published load values\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCalifornia Residents: \u003ca style=\"color: black;\" href=\"\/prop-65\" target=\"_blank\"\u003eWARNING\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":34273543782536,"sku":"U3510-2","price":22.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/8644\/4936\/products\/U3510-2.01.jpg?v=1594747318"},{"product_id":"simpson-lu24-2x4-face-mount-joist-hanger-g90-galvanized","title":"Simpson Strong-Tie LU24 2x4 Face Mount Joist Hanger, G90 Galvanized","description":"\u003cp\u003eEngineered for standard dimensional lumber, the Simpson LU Light Face-Mount Joist Hanger ensures a strong and reliable connection between joists and headers. Its precision-fit design provides essential support for light framing applications, improving structural stability in decks, floors, and roofing systems.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned for Nominal Lumber:\u003c\/strong\u003e Optimized for use with standard-sized dimensional lumber commonly available at home improvement stores and lumberyards.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace-Mount Installation:\u003c\/strong\u003e Provides a secure connection between joists and headers, reinforcing structural integrity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Construction:\u003c\/strong\u003e Made from high-quality steel with corrosion-resistant coatings to withstand various environmental conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed Prongs:\u003c\/strong\u003e Built-in prongs help position the hanger for faster and more precise installations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeck Framing:\u003c\/strong\u003e Provides critical support for deck joists, ensuring a stable and long-lasting structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloor Joist Connections:\u003c\/strong\u003e Securely fastens floor joists to headers for improved load-bearing capacity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoof Framing:\u003c\/strong\u003e Strengthens roof structures by connecting joists and rafters to beams.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeneral Wood Construction:\u003c\/strong\u003e Ideal for any light framing project that requires a dependable joist-to-header connection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Requirements:\u003c\/strong\u003e Use the manufacturer’s recommended nails or screws for optimal performance and load capacity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProper Placement:\u003c\/strong\u003e Ensure the hanger is aligned with the joist and securely attached to the header before fastening.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Fastener Installation:\u003c\/strong\u003e Drive all required fasteners completely into place to maintain structural integrity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eNOTE: The correct fasteners installed in the correct position must be used to achieve published load values\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCalifornia Residents: \u003ca style=\"color: black;\" href=\"\/prop-65\" target=\"_blank\"\u003eWARNING\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":34273555251336,"sku":"LU24","price":0.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/8644\/4936\/products\/LU24.01.jpg?v=1594841242"},{"product_id":"simpson-lus24z-2x4-double-shear-face-mount-hanger-zmax-finish","title":"Simpson Strong-Tie LUS24Z 2x4 Face Mount Hanger - Zmax Finish","description":"\u003cp\u003eThe Simpson Strong-Tie LUS series is designed for superior performance in wood-framed construction, offering a light-capacity U-shaped hanger with the added protection of ZMAX corrosion-resistant coating. Engineered for joists, rafters, and beams, this hanger features double-shear nailing, which distributes loads across two points per joist nail, increasing strength while reducing installation time.\u003c\/p\u003e\n\u003ch3\u003eKey Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eZMAX Coating for Corrosion Resistance:\u003c\/strong\u003e Provides enhanced protection against moisture, humidity, and corrosive environments, making it ideal for outdoor and treated lumber applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble-Shear Nailing Technology: \u003c\/strong\u003eAllows for a more secure connection using fewer nails, improving structural integrity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Applications:\u003c\/strong\u003e Designed for solid sawn lumber and engineered wood products, perfect for decks, floors, and roofing structures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCode-Compliant Strength:\u003c\/strong\u003e Simpson Strong-Tie rigorously tests and rates these hangers to meet building code standards.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation Notes:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse Hot-Dip Galvanized Nails:\u003c\/strong\u003e Pairing ZMAX hangers with galvanized fasteners ensures maximum corrosion resistance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAngle Nail Placement for Optimal Strength:\u003c\/strong\u003e Properly driven nails enhance load distribution and structural security.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest for Outdoor \u0026amp; High-Moisture Environments:\u003c\/strong\u003e Suitable for use in decks, porches, gazebos, and other exterior wood structures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eNOTE: The correct fasteners installed in the correct position must be used to achieve published load values\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCalifornia Residents: \u003ca href=\"\/prop-65\" style=\"color: black;\" target=\"_blank\"\u003eWARNING\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":34273599619208,"sku":"LUS24Z","price":1.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/8644\/4936\/files\/LUS24Z.02.jpg?v=1729183698"},{"product_id":"simpson-u210-2-double-2x10-face-mount-joist-hanger-g90-galvanized","title":"Simpson Strong-Tie U210-2 Double 2x10 Face Mount Joist Hanger - G90 Galvanized","description":"\u003cp\u003eThe Simpson Strong-Tie U Face-Mount Joist Hanger is designed to provide strong, stable, and secure connections for wood framing applications. Whether you're working with solid sawn lumber or engineered wood, this hanger ensures proper load distribution, helping to maintain structural integrity over time. Its precision-engineered design delivers a tight fit and maximum bearing, reducing the risk of joist rotation or misalignment.\u003c\/p\u003e\n\u003cp\u003eCrafted from high-quality galvanized steel, the U hanger provides exceptional corrosion resistance for long-lasting durability in a variety of indoor and outdoor projects. With its versatile face-mount design, this joist hanger is ideal for residential, commercial, and industrial framing applications.\u003c\/p\u003e\n\u003ch3\u003eKey Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Compatibility:\u003c\/strong\u003e Designed for both solid sawn lumber and engineered wood joists, ensuring a secure connection in various framing applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace-Mount Design:\u003c\/strong\u003e Offers easy installation with a flush, secure connection to the supporting member.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized Load Distribution:\u003c\/strong\u003e Provides full bearing support, helping to prevent twisting or shifting under load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGalvanized Steel Construction:\u003c\/strong\u003e Enhances corrosion resistance, making it suitable for interior and protected exterior applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Engineering:\u003c\/strong\u003e Manufactured for tight tolerances and a snug fit, reducing the need for field adjustments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse nails, screws, or Strong-Drive \u003ca rel=\"noopener\" href=\"https:\/\/www.fastenersplus.com\/collections\/simpson-sds-heavy-duty-connector-screws\" target=\"_blank\"\u003eSDS Heavy-Duty Connector screws\u003c\/a\u003e as specified for the application. Always refer to local building codes and manufacturer guidelines.\u003c\/li\u003e\n\u003cli\u003eThe joist should be fully seated in the hanger to achieve maximum bearing support.\u003c\/li\u003e\n\u003cli\u003eInstall fasteners into all available nail holes for optimal strength and stability.\u003c\/li\u003e\n\u003cli\u003eEnsure that the selected hanger meets the required load capacity for your specific application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeck Framing:\u003c\/strong\u003e Secures joists to beams, ensuring a stable and long-lasting deck structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloor Joists:\u003c\/strong\u003e Supports floor framing systems in residential and commercial buildings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoof Framing:\u003c\/strong\u003e Provides strong connections for rafters and ceiling joists, preventing misalignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePergolas \u0026amp; Outdoor Structures:\u003c\/strong\u003e Helps maintain stability and load distribution in exposed wood-framed designs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeneral Wood Construction:\u003c\/strong\u003e Ideal for interior and exterior framing applications requiring a secure joist-to-beam connection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eNOTE: The correct fasteners installed in the correct position must be used to achieve published load values\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCalifornia Residents: \u003ca style=\"color: black;\" href=\"\/prop-65\" target=\"_blank\"\u003eWARNING\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":34273629208712,"sku":"U210-2","price":7.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/8644\/4936\/products\/U210-2.01_59b862d7-d245-4caa-8804-b454bb2eec2c.jpg?v=1594747333"},{"product_id":"simpson-u210-2x10-face-mount-joist-hanger-g90-galvanized","title":"Simpson Strong-Tie U210 2x10 Face Mount Joist Hanger - G90 Galvanized","description":"\u003cp\u003eThe Simpson Strong-Tie U Face-Mount Joist Hanger is designed to provide strong, stable, and secure connections for wood framing applications. Whether you're working with solid sawn lumber or engineered wood, this hanger ensures proper load distribution, helping to maintain structural integrity over time. Its precision-engineered design delivers a tight fit and maximum bearing, reducing the risk of joist rotation or misalignment.\u003c\/p\u003e\n\u003cp\u003eCrafted from high-quality galvanized steel, the U hanger provides exceptional corrosion resistance for long-lasting durability in a variety of indoor and outdoor projects. With its versatile face-mount design, this joist hanger is ideal for residential, commercial, and industrial framing applications.\u003c\/p\u003e\n\u003ch3\u003eKey Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Compatibility:\u003c\/strong\u003e Designed for both solid sawn lumber and engineered wood joists, ensuring a secure connection in various framing applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace-Mount Design:\u003c\/strong\u003e Offers easy installation with a flush, secure connection to the supporting member.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized Load Distribution:\u003c\/strong\u003e Provides full bearing support, helping to prevent twisting or shifting under load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGalvanized Steel Construction:\u003c\/strong\u003e Enhances corrosion resistance, making it suitable for interior and protected exterior applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Engineering:\u003c\/strong\u003e Manufactured for tight tolerances and a snug fit, reducing the need for field adjustments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse nails, screws, or Strong-Drive \u003ca rel=\"noopener\" href=\"https:\/\/www.fastenersplus.com\/collections\/simpson-sds-heavy-duty-connector-screws\" target=\"_blank\"\u003eSDS Heavy-Duty Connector screws\u003c\/a\u003e as specified for the application. Always refer to local building codes and manufacturer guidelines.\u003c\/li\u003e\n\u003cli\u003eThe joist should be fully seated in the hanger to achieve maximum bearing support.\u003c\/li\u003e\n\u003cli\u003eInstall fasteners into all available nail holes for optimal strength and stability.\u003c\/li\u003e\n\u003cli\u003eEnsure that the selected hanger meets the required load capacity for your specific application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeck Framing:\u003c\/strong\u003e Secures joists to beams, ensuring a stable and long-lasting deck structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloor Joists:\u003c\/strong\u003e Supports floor framing systems in residential and commercial buildings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoof Framing:\u003c\/strong\u003e Provides strong connections for rafters and ceiling joists, preventing misalignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePergolas \u0026amp; Outdoor Structures:\u003c\/strong\u003e Helps maintain stability and load distribution in exposed wood-framed designs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeneral Wood Construction:\u003c\/strong\u003e Ideal for interior and exterior framing applications requiring a secure joist-to-beam connection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eNOTE: The correct fasteners installed in the correct position must be used to achieve published load values\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCalifornia Residents: \u003ca style=\"color: black;\" href=\"\/prop-65\" target=\"_blank\"\u003eWARNING\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":34273630748808,"sku":"U210","price":4.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/8644\/4936\/files\/U210.07.jpg?v=1727471634"},{"product_id":"simpson-u210-3-triple-2x10-face-mount-joist-hanger-g90-galvanized","title":"Simpson Strong-Tie U210-3 Triple 2x10 Face Mount Joist Hanger - G90 Galvanized","description":"\u003cp\u003eThe Simpson Strong-Tie U Face-Mount Joist Hanger is designed to provide strong, stable, and secure connections for wood framing applications. Whether you're working with solid sawn lumber or engineered wood, this hanger ensures proper load distribution, helping to maintain structural integrity over time. Its precision-engineered design delivers a tight fit and maximum bearing, reducing the risk of joist rotation or misalignment.\u003c\/p\u003e\n\u003cp\u003eCrafted from high-quality galvanized steel, the U hanger provides exceptional corrosion resistance for long-lasting durability in a variety of indoor and outdoor projects. With its versatile face-mount design, this joist hanger is ideal for residential, commercial, and industrial framing applications.\u003c\/p\u003e\n\u003ch3\u003eKey Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Compatibility:\u003c\/strong\u003e Designed for both solid sawn lumber and engineered wood joists, ensuring a secure connection in various framing applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace-Mount Design:\u003c\/strong\u003e Offers easy installation with a flush, secure connection to the supporting member.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized Load Distribution:\u003c\/strong\u003e Provides full bearing support, helping to prevent twisting or shifting under load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGalvanized Steel Construction:\u003c\/strong\u003e Enhances corrosion resistance, making it suitable for interior and protected exterior applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Engineering:\u003c\/strong\u003e Manufactured for tight tolerances and a snug fit, reducing the need for field adjustments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse nails, screws, or Strong-Drive \u003ca rel=\"noopener\" href=\"https:\/\/www.fastenersplus.com\/collections\/simpson-sds-heavy-duty-connector-screws\" target=\"_blank\"\u003eSDS Heavy-Duty Connector screws\u003c\/a\u003e as specified for the application. Always refer to local building codes and manufacturer guidelines.\u003c\/li\u003e\n\u003cli\u003eThe joist should be fully seated in the hanger to achieve maximum bearing support.\u003c\/li\u003e\n\u003cli\u003eInstall fasteners into all available nail holes for optimal strength and stability.\u003c\/li\u003e\n\u003cli\u003eEnsure that the selected hanger meets the required load capacity for your specific application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeck Framing:\u003c\/strong\u003e Secures joists to beams, ensuring a stable and long-lasting deck structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloor Joists:\u003c\/strong\u003e Supports floor framing systems in residential and commercial buildings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoof Framing:\u003c\/strong\u003e Provides strong connections for rafters and ceiling joists, preventing misalignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePergolas \u0026amp; Outdoor Structures:\u003c\/strong\u003e Helps maintain stability and load distribution in exposed wood-framed designs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeneral Wood Construction:\u003c\/strong\u003e Ideal for interior and exterior framing applications requiring a secure joist-to-beam connection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eNOTE: The correct fasteners installed in the correct position must be used to achieve published load values\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCalifornia Residents: \u003ca style=\"color: black;\" href=\"\/prop-65\" target=\"_blank\"\u003eWARNING\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":34273631993992,"sku":"U210-3","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/8644\/4936\/products\/U210-3.01_488753c5-4aa9-40bf-bb07-29fe60483f75.jpg?v=1594747331"},{"product_id":"simpson-u214-2x14-face-mount-joist-hanger-g90-galvanized","title":"Simpson Strong-Tie U214 2x14 Face Mount Joist Hanger - G90 Galvanized","description":"\u003cp\u003eThe Simpson Strong-Tie U Face-Mount Joist Hanger is designed to provide strong, stable, and secure connections for wood framing applications. Whether you're working with solid sawn lumber or engineered wood, this hanger ensures proper load distribution, helping to maintain structural integrity over time. Its precision-engineered design delivers a tight fit and maximum bearing, reducing the risk of joist rotation or misalignment.\u003c\/p\u003e\n\u003cp\u003eCrafted from high-quality galvanized steel, the U hanger provides exceptional corrosion resistance for long-lasting durability in a variety of indoor and outdoor projects. With its versatile face-mount design, this joist hanger is ideal for residential, commercial, and industrial framing applications.\u003c\/p\u003e\n\u003ch3\u003eKey Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Compatibility:\u003c\/strong\u003e Designed for both solid sawn lumber and engineered wood joists, ensuring a secure connection in various framing applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace-Mount Design:\u003c\/strong\u003e Offers easy installation with a flush, secure connection to the supporting member.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized Load Distribution:\u003c\/strong\u003e Provides full bearing support, helping to prevent twisting or shifting under load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGalvanized Steel Construction:\u003c\/strong\u003e Enhances corrosion resistance, making it suitable for interior and protected exterior applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Engineering:\u003c\/strong\u003e Manufactured for tight tolerances and a snug fit, reducing the need for field adjustments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse nails, screws, or Strong-Drive \u003ca rel=\"noopener\" href=\"https:\/\/www.fastenersplus.com\/collections\/simpson-sds-heavy-duty-connector-screws\" target=\"_blank\"\u003eSDS Heavy-Duty Connector screws\u003c\/a\u003e as specified for the application. Always refer to local building codes and manufacturer guidelines.\u003c\/li\u003e\n\u003cli\u003eThe joist should be fully seated in the hanger to achieve maximum bearing support.\u003c\/li\u003e\n\u003cli\u003eInstall fasteners into all available nail holes for optimal strength and stability.\u003c\/li\u003e\n\u003cli\u003eEnsure that the selected hanger meets the required load capacity for your specific application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeck Framing:\u003c\/strong\u003e Secures joists to beams, ensuring a stable and long-lasting deck structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloor Joists:\u003c\/strong\u003e Supports floor framing systems in residential and commercial buildings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoof Framing:\u003c\/strong\u003e Provides strong connections for rafters and ceiling joists, preventing misalignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePergolas \u0026amp; Outdoor Structures:\u003c\/strong\u003e Helps maintain stability and load distribution in exposed wood-framed designs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeneral Wood Construction:\u003c\/strong\u003e Ideal for interior and exterior framing applications requiring a secure joist-to-beam connection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eNOTE: The correct fasteners installed in the correct position must be used to achieve published load values\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCalifornia Residents: \u003ca style=\"color: black;\" href=\"\/prop-65\" target=\"_blank\"\u003eWARNING\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":34273634615432,"sku":"U214","price":6.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/8644\/4936\/products\/U3516-20.01_34782c23-09e9-4759-8dae-7503ef0a98d7.jpg?v=1594747329"},{"product_id":"simpson-u24-2-double-2x4-face-mount-joist-hanger-g90-galvanized","title":"Simpson Strong-Tie U24-2 Double 2x4 Face Mount Joist Hanger - G90 Galvanized","description":"\u003cp\u003eThe Simpson Strong-Tie U Face-Mount Joist Hanger is designed to provide strong, stable, and secure connections for wood framing applications. Whether you're working with solid sawn lumber or engineered wood, this hanger ensures proper load distribution, helping to maintain structural integrity over time. Its precision-engineered design delivers a tight fit and maximum bearing, reducing the risk of joist rotation or misalignment.\u003c\/p\u003e\n\u003cp\u003eCrafted from high-quality galvanized steel, the U hanger provides exceptional corrosion resistance for long-lasting durability in a variety of indoor and outdoor projects. With its versatile face-mount design, this joist hanger is ideal for residential, commercial, and industrial framing applications.\u003c\/p\u003e\n\u003ch3\u003eKey Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Compatibility:\u003c\/strong\u003e Designed for both solid sawn lumber and engineered wood joists, ensuring a secure connection in various framing applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace-Mount Design:\u003c\/strong\u003e Offers easy installation with a flush, secure connection to the supporting member.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized Load Distribution:\u003c\/strong\u003e Provides full bearing support, helping to prevent twisting or shifting under load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGalvanized Steel Construction:\u003c\/strong\u003e Enhances corrosion resistance, making it suitable for interior and protected exterior applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Engineering:\u003c\/strong\u003e Manufactured for tight tolerances and a snug fit, reducing the need for field adjustments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse nails, screws, or Strong-Drive \u003ca rel=\"noopener\" href=\"https:\/\/www.fastenersplus.com\/collections\/simpson-sds-heavy-duty-connector-screws\" target=\"_blank\"\u003eSDS Heavy-Duty Connector screws\u003c\/a\u003e as specified for the application. Always refer to local building codes and manufacturer guidelines.\u003c\/li\u003e\n\u003cli\u003eThe joist should be fully seated in the hanger to achieve maximum bearing support.\u003c\/li\u003e\n\u003cli\u003eInstall fasteners into all available nail holes for optimal strength and stability.\u003c\/li\u003e\n\u003cli\u003eEnsure that the selected hanger meets the required load capacity for your specific application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeck Framing:\u003c\/strong\u003e Secures joists to beams, ensuring a stable and long-lasting deck structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloor Joists:\u003c\/strong\u003e Supports floor framing systems in residential and commercial buildings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoof Framing:\u003c\/strong\u003e Provides strong connections for rafters and ceiling joists, preventing misalignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePergolas \u0026amp; Outdoor Structures:\u003c\/strong\u003e Helps maintain stability and load distribution in exposed wood-framed designs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeneral Wood Construction:\u003c\/strong\u003e Ideal for interior and exterior framing applications requiring a secure joist-to-beam connection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eNOTE: The correct fasteners installed in the correct position must be used to achieve published load values\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCalifornia Residents: \u003ca style=\"color: black;\" href=\"\/prop-65\" target=\"_blank\"\u003eWARNING\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":34273636024456,"sku":"U24-2","price":5.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/8644\/4936\/products\/U24-2.01_cd733e66-209e-4780-b0c8-0f769814f6f7.jpg?v=1594747328"},{"product_id":"simpson-u24-2x4-face-mount-joist-hanger-g90-galvanized","title":"Simpson Strong-Tie U24 2x4 Face Mount Joist Hanger - G90 Galvanized","description":"\u003cp\u003eThe Simpson Strong-Tie U Face-Mount Joist Hanger is designed to provide strong, stable, and secure connections for wood framing applications. Whether you're working with solid sawn lumber or engineered wood, this hanger ensures proper load distribution, helping to maintain structural integrity over time. Its precision-engineered design delivers a tight fit and maximum bearing, reducing the risk of joist rotation or misalignment.\u003c\/p\u003e\n\u003cp\u003eCrafted from high-quality galvanized steel, the U hanger provides exceptional corrosion resistance for long-lasting durability in a variety of indoor and outdoor projects. With its versatile face-mount design, this joist hanger is ideal for residential, commercial, and industrial framing applications.\u003c\/p\u003e\n\u003ch3\u003eKey Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Compatibility:\u003c\/strong\u003e Designed for both solid sawn lumber and engineered wood joists, ensuring a secure connection in various framing applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace-Mount Design:\u003c\/strong\u003e Offers easy installation with a flush, secure connection to the supporting member.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized Load Distribution:\u003c\/strong\u003e Provides full bearing support, helping to prevent twisting or shifting under load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGalvanized Steel Construction:\u003c\/strong\u003e Enhances corrosion resistance, making it suitable for interior and protected exterior applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Engineering:\u003c\/strong\u003e Manufactured for tight tolerances and a snug fit, reducing the need for field adjustments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse nails, screws, or Strong-Drive \u003ca rel=\"noopener\" href=\"https:\/\/www.fastenersplus.com\/collections\/simpson-sds-heavy-duty-connector-screws\" target=\"_blank\"\u003eSDS Heavy-Duty Connector screws\u003c\/a\u003e as specified for the application. Always refer to local building codes and manufacturer guidelines.\u003c\/li\u003e\n\u003cli\u003eThe joist should be fully seated in the hanger to achieve maximum bearing support.\u003c\/li\u003e\n\u003cli\u003eInstall fasteners into all available nail holes for optimal strength and stability.\u003c\/li\u003e\n\u003cli\u003eEnsure that the selected hanger meets the required load capacity for your specific application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeck Framing:\u003c\/strong\u003e Secures joists to beams, ensuring a stable and long-lasting deck structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloor Joists:\u003c\/strong\u003e Supports floor framing systems in residential and commercial buildings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoof Framing:\u003c\/strong\u003e Provides strong connections for rafters and ceiling joists, preventing misalignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePergolas \u0026amp; Outdoor Structures:\u003c\/strong\u003e Helps maintain stability and load distribution in exposed wood-framed designs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeneral Wood Construction:\u003c\/strong\u003e Ideal for interior and exterior framing applications requiring a secure joist-to-beam connection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eNOTE: The correct fasteners installed in the correct position must be used to achieve published load values\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCalifornia Residents: \u003ca style=\"color: black;\" href=\"\/prop-65\" target=\"_blank\"\u003eWARNING\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":34273637073032,"sku":"U24","price":2.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/8644\/4936\/products\/LU24.01_8f74abac-6921-41af-b5a6-744ee36b21e5.jpg?v=1594842804"},{"product_id":"simpson-u26-2-double-2x6-face-mount-joist-hanger-g90-galvanized","title":"Simpson Strong-Tie U26-2 Double 2x6 Face Mount Joist Hanger - G90 Galvanized","description":"\u003cp\u003eThe Simpson Strong-Tie U Face-Mount Joist Hanger is designed to provide strong, stable, and secure connections for wood framing applications. Whether you're working with solid sawn lumber or engineered wood, this hanger ensures proper load distribution, helping to maintain structural integrity over time. Its precision-engineered design delivers a tight fit and maximum bearing, reducing the risk of joist rotation or misalignment.\u003c\/p\u003e\n\u003cp\u003eCrafted from high-quality galvanized steel, the U hanger provides exceptional corrosion resistance for long-lasting durability in a variety of indoor and outdoor projects. With its versatile face-mount design, this joist hanger is ideal for residential, commercial, and industrial framing applications.\u003c\/p\u003e\n\u003ch3\u003eKey Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Compatibility:\u003c\/strong\u003e Designed for both solid sawn lumber and engineered wood joists, ensuring a secure connection in various framing applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace-Mount Design:\u003c\/strong\u003e Offers easy installation with a flush, secure connection to the supporting member.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized Load Distribution:\u003c\/strong\u003e Provides full bearing support, helping to prevent twisting or shifting under load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGalvanized Steel Construction:\u003c\/strong\u003e Enhances corrosion resistance, making it suitable for interior and protected exterior applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Engineering:\u003c\/strong\u003e Manufactured for tight tolerances and a snug fit, reducing the need for field adjustments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse nails, screws, or Strong-Drive \u003ca rel=\"noopener\" href=\"https:\/\/www.fastenersplus.com\/collections\/simpson-sds-heavy-duty-connector-screws\" target=\"_blank\"\u003eSDS Heavy-Duty Connector screws\u003c\/a\u003e as specified for the application. Always refer to local building codes and manufacturer guidelines.\u003c\/li\u003e\n\u003cli\u003eThe joist should be fully seated in the hanger to achieve maximum bearing support.\u003c\/li\u003e\n\u003cli\u003eInstall fasteners into all available nail holes for optimal strength and stability.\u003c\/li\u003e\n\u003cli\u003eEnsure that the selected hanger meets the required load capacity for your specific application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeck Framing:\u003c\/strong\u003e Secures joists to beams, ensuring a stable and long-lasting deck structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloor Joists:\u003c\/strong\u003e Supports floor framing systems in residential and commercial buildings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoof Framing:\u003c\/strong\u003e Provides strong connections for rafters and ceiling joists, preventing misalignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePergolas \u0026amp; Outdoor Structures:\u003c\/strong\u003e Helps maintain stability and load distribution in exposed wood-framed designs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeneral Wood Construction:\u003c\/strong\u003e Ideal for interior and exterior framing applications requiring a secure joist-to-beam connection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eNOTE: The correct fasteners installed in the correct position must be used to achieve published load values\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCalifornia Residents: \u003ca style=\"color: black;\" href=\"\/prop-65\" target=\"_blank\"\u003eWARNING\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":34273638285448,"sku":"U26-2","price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/8644\/4936\/products\/U26-2.01_3c80cf97-f5f0-4ffd-b777-b1ae43c62728.jpg?v=1594747326"},{"product_id":"simpson-u26-2x6-face-mount-joist-hanger-g90-galvanized","title":"Simpson Strong-Tie U26 2x6 Face Mount Joist Hanger - G90 Galvanized","description":"\u003cp\u003eThe Simpson Strong-Tie U Face-Mount Joist Hanger is designed to provide strong, stable, and secure connections for wood framing applications. Whether you're working with solid sawn lumber or engineered wood, this hanger ensures proper load distribution, helping to maintain structural integrity over time. Its precision-engineered design delivers a tight fit and maximum bearing, reducing the risk of joist rotation or misalignment.\u003c\/p\u003e\n\u003cp\u003eCrafted from high-quality galvanized steel, the U hanger provides exceptional corrosion resistance for long-lasting durability in a variety of indoor and outdoor projects. With its versatile face-mount design, this joist hanger is ideal for residential, commercial, and industrial framing applications.\u003c\/p\u003e\n\u003ch3\u003eKey Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Compatibility:\u003c\/strong\u003e Designed for both solid sawn lumber and engineered wood joists, ensuring a secure connection in various framing applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace-Mount Design:\u003c\/strong\u003e Offers easy installation with a flush, secure connection to the supporting member.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized Load Distribution:\u003c\/strong\u003e Provides full bearing support, helping to prevent twisting or shifting under load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGalvanized Steel Construction:\u003c\/strong\u003e Enhances corrosion resistance, making it suitable for interior and protected exterior applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Engineering:\u003c\/strong\u003e Manufactured for tight tolerances and a snug fit, reducing the need for field adjustments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse nails, screws, or Strong-Drive \u003ca rel=\"noopener\" href=\"https:\/\/www.fastenersplus.com\/collections\/simpson-sds-heavy-duty-connector-screws\" target=\"_blank\"\u003eSDS Heavy-Duty Connector screws\u003c\/a\u003e as specified for the application. Always refer to local building codes and manufacturer guidelines.\u003c\/li\u003e\n\u003cli\u003eThe joist should be fully seated in the hanger to achieve maximum bearing support.\u003c\/li\u003e\n\u003cli\u003eInstall fasteners into all available nail holes for optimal strength and stability.\u003c\/li\u003e\n\u003cli\u003eEnsure that the selected hanger meets the required load capacity for your specific application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeck Framing:\u003c\/strong\u003e Secures joists to beams, ensuring a stable and long-lasting deck structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloor Joists:\u003c\/strong\u003e Supports floor framing systems in residential and commercial buildings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoof Framing:\u003c\/strong\u003e Provides strong connections for rafters and ceiling joists, preventing misalignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePergolas \u0026amp; Outdoor Structures:\u003c\/strong\u003e Helps maintain stability and load distribution in exposed wood-framed designs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeneral Wood Construction:\u003c\/strong\u003e Ideal for interior and exterior framing applications requiring a secure joist-to-beam connection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eNOTE: The correct fasteners installed in the correct position must be used to achieve published load values\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCalifornia Residents: \u003ca style=\"color: black;\" href=\"\/prop-65\" target=\"_blank\"\u003eWARNING\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":34273639596168,"sku":"U26","price":2.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/8644\/4936\/files\/U26.01.jpg?v=1733423639"},{"product_id":"simpson-u26-3-triple-2x6-face-mount-joist-hanger-g90-galvanized","title":"Simpson Strong-Tie U26-3 Triple 2x6 Face Mount Joist Hanger - G90 Galvanized","description":"\u003cp\u003eThe Simpson Strong-Tie U Face-Mount Joist Hanger is designed to provide strong, stable, and secure connections for wood framing applications. Whether you're working with solid sawn lumber or engineered wood, this hanger ensures proper load distribution, helping to maintain structural integrity over time. Its precision-engineered design delivers a tight fit and maximum bearing, reducing the risk of joist rotation or misalignment.\u003c\/p\u003e\n\u003cp\u003eCrafted from high-quality galvanized steel, the U hanger provides exceptional corrosion resistance for long-lasting durability in a variety of indoor and outdoor projects. With its versatile face-mount design, this joist hanger is ideal for residential, commercial, and industrial framing applications.\u003c\/p\u003e\n\u003ch3\u003eKey Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Compatibility:\u003c\/strong\u003e Designed for both solid sawn lumber and engineered wood joists, ensuring a secure connection in various framing applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace-Mount Design:\u003c\/strong\u003e Offers easy installation with a flush, secure connection to the supporting member.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized Load Distribution:\u003c\/strong\u003e Provides full bearing support, helping to prevent twisting or shifting under load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGalvanized Steel Construction:\u003c\/strong\u003e Enhances corrosion resistance, making it suitable for interior and protected exterior applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Engineering:\u003c\/strong\u003e Manufactured for tight tolerances and a snug fit, reducing the need for field adjustments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse nails, screws, or Strong-Drive \u003ca rel=\"noopener\" href=\"https:\/\/www.fastenersplus.com\/collections\/simpson-sds-heavy-duty-connector-screws\" target=\"_blank\"\u003eSDS Heavy-Duty Connector screws\u003c\/a\u003e as specified for the application. Always refer to local building codes and manufacturer guidelines.\u003c\/li\u003e\n\u003cli\u003eThe joist should be fully seated in the hanger to achieve maximum bearing support.\u003c\/li\u003e\n\u003cli\u003eInstall fasteners into all available nail holes for optimal strength and stability.\u003c\/li\u003e\n\u003cli\u003eEnsure that the selected hanger meets the required load capacity for your specific application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeck Framing:\u003c\/strong\u003e Secures joists to beams, ensuring a stable and long-lasting deck structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloor Joists:\u003c\/strong\u003e Supports floor framing systems in residential and commercial buildings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoof Framing:\u003c\/strong\u003e Provides strong connections for rafters and ceiling joists, preventing misalignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePergolas \u0026amp; Outdoor Structures:\u003c\/strong\u003e Helps maintain stability and load distribution in exposed wood-framed designs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeneral Wood Construction:\u003c\/strong\u003e Ideal for interior and exterior framing applications requiring a secure joist-to-beam connection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eNOTE: The correct fasteners installed in the correct position must be used to achieve published load values\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCalifornia Residents: \u003ca style=\"color: black;\" href=\"\/prop-65\" target=\"_blank\"\u003eWARNING\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":34273640939656,"sku":"U26-3","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/8644\/4936\/products\/U26-3.01.jpg?v=1594747325"},{"product_id":"simpson-u310-3x10-face-mount-joist-hanger-g90-galvanized","title":"Simpson Strong-Tie U310 3x10 Face Mount Joist Hanger - G90 Galvanized","description":"\u003cp\u003eThe Simpson Strong-Tie U Face-Mount Joist Hanger is designed to provide strong, stable, and secure connections for wood framing applications. Whether you're working with solid sawn lumber or engineered wood, this hanger ensures proper load distribution, helping to maintain structural integrity over time. Its precision-engineered design delivers a tight fit and maximum bearing, reducing the risk of joist rotation or misalignment.\u003c\/p\u003e\n\u003cp\u003eCrafted from high-quality galvanized steel, the U hanger provides exceptional corrosion resistance for long-lasting durability in a variety of indoor and outdoor projects. With its versatile face-mount design, this joist hanger is ideal for residential, commercial, and industrial framing applications.\u003c\/p\u003e\n\u003ch3\u003eKey Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Compatibility:\u003c\/strong\u003e Designed for both solid sawn lumber and engineered wood joists, ensuring a secure connection in various framing applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace-Mount Design:\u003c\/strong\u003e Offers easy installation with a flush, secure connection to the supporting member.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized Load Distribution:\u003c\/strong\u003e Provides full bearing support, helping to prevent twisting or shifting under load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGalvanized Steel Construction:\u003c\/strong\u003e Enhances corrosion resistance, making it suitable for interior and protected exterior applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Engineering:\u003c\/strong\u003e Manufactured for tight tolerances and a snug fit, reducing the need for field adjustments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse nails, screws, or Strong-Drive \u003ca rel=\"noopener\" href=\"https:\/\/www.fastenersplus.com\/collections\/simpson-sds-heavy-duty-connector-screws\" target=\"_blank\"\u003eSDS Heavy-Duty Connector screws\u003c\/a\u003e as specified for the application. Always refer to local building codes and manufacturer guidelines.\u003c\/li\u003e\n\u003cli\u003eThe joist should be fully seated in the hanger to achieve maximum bearing support.\u003c\/li\u003e\n\u003cli\u003eInstall fasteners into all available nail holes for optimal strength and stability.\u003c\/li\u003e\n\u003cli\u003eEnsure that the selected hanger meets the required load capacity for your specific application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeck Framing:\u003c\/strong\u003e Secures joists to beams, ensuring a stable and long-lasting deck structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloor Joists:\u003c\/strong\u003e Supports floor framing systems in residential and commercial buildings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoof Framing:\u003c\/strong\u003e Provides strong connections for rafters and ceiling joists, preventing misalignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePergolas \u0026amp; Outdoor Structures:\u003c\/strong\u003e Helps maintain stability and load distribution in exposed wood-framed designs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeneral Wood Construction:\u003c\/strong\u003e Ideal for interior and exterior framing applications requiring a secure joist-to-beam connection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eNOTE: The correct fasteners installed in the correct position must be used to achieve published load values\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCalifornia Residents: \u003ca style=\"color: black;\" href=\"\/prop-65\" target=\"_blank\"\u003eWARNING\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":34273642774664,"sku":"U310","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/8644\/4936\/products\/U210-2.01.jpg?v=1594747323"},{"product_id":"simpson-u314-3x14-face-mount-joist-hanger-g90-galvanized","title":"Simpson Strong-Tie U314 3x14 Face Mount Joist Hanger - G90 Galvanized","description":"\u003cp\u003eThe Simpson Strong-Tie U Face-Mount Joist Hanger is designed to provide strong, stable, and secure connections for wood framing applications. Whether you're working with solid sawn lumber or engineered wood, this hanger ensures proper load distribution, helping to maintain structural integrity over time. Its precision-engineered design delivers a tight fit and maximum bearing, reducing the risk of joist rotation or misalignment.\u003c\/p\u003e\n\u003cp\u003eCrafted from high-quality galvanized steel, the U hanger provides exceptional corrosion resistance for long-lasting durability in a variety of indoor and outdoor projects. With its versatile face-mount design, this joist hanger is ideal for residential, commercial, and industrial framing applications.\u003c\/p\u003e\n\u003ch3\u003eKey Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Compatibility:\u003c\/strong\u003e Designed for both solid sawn lumber and engineered wood joists, ensuring a secure connection in various framing applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace-Mount Design:\u003c\/strong\u003e Offers easy installation with a flush, secure connection to the supporting member.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized Load Distribution:\u003c\/strong\u003e Provides full bearing support, helping to prevent twisting or shifting under load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGalvanized Steel Construction:\u003c\/strong\u003e Enhances corrosion resistance, making it suitable for interior and protected exterior applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Engineering:\u003c\/strong\u003e Manufactured for tight tolerances and a snug fit, reducing the need for field adjustments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse nails, screws, or Strong-Drive \u003ca rel=\"noopener\" href=\"https:\/\/www.fastenersplus.com\/collections\/simpson-sds-heavy-duty-connector-screws\" target=\"_blank\"\u003eSDS Heavy-Duty Connector screws\u003c\/a\u003e as specified for the application. Always refer to local building codes and manufacturer guidelines.\u003c\/li\u003e\n\u003cli\u003eThe joist should be fully seated in the hanger to achieve maximum bearing support.\u003c\/li\u003e\n\u003cli\u003eInstall fasteners into all available nail holes for optimal strength and stability.\u003c\/li\u003e\n\u003cli\u003eEnsure that the selected hanger meets the required load capacity for your specific application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeck Framing:\u003c\/strong\u003e Secures joists to beams, ensuring a stable and long-lasting deck structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloor Joists:\u003c\/strong\u003e Supports floor framing systems in residential and commercial buildings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoof Framing:\u003c\/strong\u003e Provides strong connections for rafters and ceiling joists, preventing misalignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePergolas \u0026amp; Outdoor Structures:\u003c\/strong\u003e Helps maintain stability and load distribution in exposed wood-framed designs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeneral Wood Construction:\u003c\/strong\u003e Ideal for interior and exterior framing applications requiring a secure joist-to-beam connection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eNOTE: The correct fasteners installed in the correct position must be used to achieve published load values\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCalifornia Residents: \u003ca style=\"color: black;\" href=\"\/prop-65\" target=\"_blank\"\u003eWARNING\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":34273644740744,"sku":"U314","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/8644\/4936\/products\/U3516-20.01_abcb877b-6a0b-4dae-9b49-2ef4fc9d1616.jpg?v=1594747322"},{"product_id":"simpson-u34-3x4-face-mount-joist-hanger-g90-galvanized","title":"Simpson Strong-Tie U34 3x4 Face Mount Joist Hanger - G90 Galvanized","description":"\u003cp\u003eThe Simpson Strong-Tie U Face-Mount Joist Hanger is designed to provide strong, stable, and secure connections for wood framing applications. Whether you're working with solid sawn lumber or engineered wood, this hanger ensures proper load distribution, helping to maintain structural integrity over time. Its precision-engineered design delivers a tight fit and maximum bearing, reducing the risk of joist rotation or misalignment.\u003c\/p\u003e\n\u003cp\u003eCrafted from high-quality galvanized steel, the U hanger provides exceptional corrosion resistance for long-lasting durability in a variety of indoor and outdoor projects. With its versatile face-mount design, this joist hanger is ideal for residential, commercial, and industrial framing applications.\u003c\/p\u003e\n\u003ch3\u003eKey Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Compatibility:\u003c\/strong\u003e Designed for both solid sawn lumber and engineered wood joists, ensuring a secure connection in various framing applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace-Mount Design:\u003c\/strong\u003e Offers easy installation with a flush, secure connection to the supporting member.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized Load Distribution:\u003c\/strong\u003e Provides full bearing support, helping to prevent twisting or shifting under load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGalvanized Steel Construction:\u003c\/strong\u003e Enhances corrosion resistance, making it suitable for interior and protected exterior applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Engineering:\u003c\/strong\u003e Manufactured for tight tolerances and a snug fit, reducing the need for field adjustments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse nails, screws, or Strong-Drive \u003ca rel=\"noopener\" href=\"https:\/\/www.fastenersplus.com\/collections\/simpson-sds-heavy-duty-connector-screws\" target=\"_blank\"\u003eSDS Heavy-Duty Connector screws\u003c\/a\u003e as specified for the application. Always refer to local building codes and manufacturer guidelines.\u003c\/li\u003e\n\u003cli\u003eThe joist should be fully seated in the hanger to achieve maximum bearing support.\u003c\/li\u003e\n\u003cli\u003eInstall fasteners into all available nail holes for optimal strength and stability.\u003c\/li\u003e\n\u003cli\u003eEnsure that the selected hanger meets the required load capacity for your specific application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeck Framing:\u003c\/strong\u003e Secures joists to beams, ensuring a stable and long-lasting deck structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloor Joists:\u003c\/strong\u003e Supports floor framing systems in residential and commercial buildings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoof Framing:\u003c\/strong\u003e Provides strong connections for rafters and ceiling joists, preventing misalignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePergolas \u0026amp; Outdoor Structures:\u003c\/strong\u003e Helps maintain stability and load distribution in exposed wood-framed designs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeneral Wood Construction:\u003c\/strong\u003e Ideal for interior and exterior framing applications requiring a secure joist-to-beam connection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eNOTE: The correct fasteners installed in the correct position must be used to achieve published load values\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCalifornia Residents: \u003ca style=\"color: black;\" href=\"\/prop-65\" target=\"_blank\"\u003eWARNING\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":34273646182536,"sku":"U34","price":6.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/8644\/4936\/products\/U36.01.jpg?v=1594747321"},{"product_id":"simpson-u36-3x6-face-mount-joist-hanger-g90-galvanized","title":"Simpson Strong-Tie U36 3x6 Face Mount Joist Hanger - G90 Galvanized","description":"\u003cp\u003eThe Simpson Strong-Tie U Face-Mount Joist Hanger is designed to provide strong, stable, and secure connections for wood framing applications. Whether you're working with solid sawn lumber or engineered wood, this hanger ensures proper load distribution, helping to maintain structural integrity over time. Its precision-engineered design delivers a tight fit and maximum bearing, reducing the risk of joist rotation or misalignment.\u003c\/p\u003e\n\u003cp\u003eCrafted from high-quality galvanized steel, the U hanger provides exceptional corrosion resistance for long-lasting durability in a variety of indoor and outdoor projects. With its versatile face-mount design, this joist hanger is ideal for residential, commercial, and industrial framing applications.\u003c\/p\u003e\n\u003ch3\u003eKey Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Compatibility:\u003c\/strong\u003e Designed for both solid sawn lumber and engineered wood joists, ensuring a secure connection in various framing applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace-Mount Design:\u003c\/strong\u003e Offers easy installation with a flush, secure connection to the supporting member.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized Load Distribution:\u003c\/strong\u003e Provides full bearing support, helping to prevent twisting or shifting under load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGalvanized Steel Construction:\u003c\/strong\u003e Enhances corrosion resistance, making it suitable for interior and protected exterior applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Engineering:\u003c\/strong\u003e Manufactured for tight tolerances and a snug fit, reducing the need for field adjustments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse nails, screws, or Strong-Drive \u003ca rel=\"noopener\" href=\"https:\/\/www.fastenersplus.com\/collections\/simpson-sds-heavy-duty-connector-screws\" target=\"_blank\"\u003eSDS Heavy-Duty Connector screws\u003c\/a\u003e as specified for the application. Always refer to local building codes and manufacturer guidelines.\u003c\/li\u003e\n\u003cli\u003eThe joist should be fully seated in the hanger to achieve maximum bearing support.\u003c\/li\u003e\n\u003cli\u003eInstall fasteners into all available nail holes for optimal strength and stability.\u003c\/li\u003e\n\u003cli\u003eEnsure that the selected hanger meets the required load capacity for your specific application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeck Framing:\u003c\/strong\u003e Secures joists to beams, ensuring a stable and long-lasting deck structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloor Joists:\u003c\/strong\u003e Supports floor framing systems in residential and commercial buildings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoof Framing:\u003c\/strong\u003e Provides strong connections for rafters and ceiling joists, preventing misalignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePergolas \u0026amp; Outdoor Structures:\u003c\/strong\u003e Helps maintain stability and load distribution in exposed wood-framed designs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeneral Wood Construction:\u003c\/strong\u003e Ideal for interior and exterior framing applications requiring a secure joist-to-beam connection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eNOTE: The correct fasteners installed in the correct position must be used to achieve published load values\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCalifornia Residents: \u003ca style=\"color: black;\" href=\"\/prop-65\" target=\"_blank\"\u003eWARNING\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":34273647591560,"sku":"U36","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/8644\/4936\/products\/U26-2.01.jpg?v=1594747314"},{"product_id":"simpson-u410-4x10-face-mount-joist-hanger-g90-galvanized","title":"Simpson Strong-Tie U410 4x10 Face Mount Joist Hanger - G90 Galvanized","description":"\u003cp\u003eThe Simpson Strong-Tie U Face-Mount Joist Hanger is designed to provide strong, stable, and secure connections for wood framing applications. Whether you're working with solid sawn lumber or engineered wood, this hanger ensures proper load distribution, helping to maintain structural integrity over time. Its precision-engineered design delivers a tight fit and maximum bearing, reducing the risk of joist rotation or misalignment.\u003c\/p\u003e\n\u003cp\u003eCrafted from high-quality galvanized steel, the U hanger provides exceptional corrosion resistance for long-lasting durability in a variety of indoor and outdoor projects. With its versatile face-mount design, this joist hanger is ideal for residential, commercial, and industrial framing applications.\u003c\/p\u003e\n\u003ch3\u003eKey Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Compatibility:\u003c\/strong\u003e Designed for both solid sawn lumber and engineered wood joists, ensuring a secure connection in various framing applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace-Mount Design:\u003c\/strong\u003e Offers easy installation with a flush, secure connection to the supporting member.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized Load Distribution:\u003c\/strong\u003e Provides full bearing support, helping to prevent twisting or shifting under load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGalvanized Steel Construction:\u003c\/strong\u003e Enhances corrosion resistance, making it suitable for interior and protected exterior applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Engineering:\u003c\/strong\u003e Manufactured for tight tolerances and a snug fit, reducing the need for field adjustments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse nails, screws, or Strong-Drive \u003ca rel=\"noopener\" href=\"https:\/\/www.fastenersplus.com\/collections\/simpson-sds-heavy-duty-connector-screws\" target=\"_blank\"\u003eSDS Heavy-Duty Connector screws\u003c\/a\u003e as specified for the application. Always refer to local building codes and manufacturer guidelines.\u003c\/li\u003e\n\u003cli\u003eThe joist should be fully seated in the hanger to achieve maximum bearing support.\u003c\/li\u003e\n\u003cli\u003eInstall fasteners into all available nail holes for optimal strength and stability.\u003c\/li\u003e\n\u003cli\u003eEnsure that the selected hanger meets the required load capacity for your specific application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeck Framing:\u003c\/strong\u003e Secures joists to beams, ensuring a stable and long-lasting deck structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloor Joists:\u003c\/strong\u003e Supports floor framing systems in residential and commercial buildings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoof Framing:\u003c\/strong\u003e Provides strong connections for rafters and ceiling joists, preventing misalignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePergolas \u0026amp; Outdoor Structures:\u003c\/strong\u003e Helps maintain stability and load distribution in exposed wood-framed designs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeneral Wood Construction:\u003c\/strong\u003e Ideal for interior and exterior framing applications requiring a secure joist-to-beam connection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eNOTE: The correct fasteners installed in the correct position must be used to achieve published load values\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCalifornia Residents: \u003ca style=\"color: black;\" href=\"\/prop-65\" target=\"_blank\"\u003eWARNING\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":34273649524872,"sku":"U410","price":7.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/8644\/4936\/products\/U410.01.jpg?v=1594747313"},{"product_id":"simpson-u414-4x14-face-mount-joist-hanger-g90-galvanized","title":"Simpson Strong-Tie U414 4x14 Face Mount Joist Hanger - G90 Galvanized","description":"\u003cp\u003eThe Simpson Strong-Tie U Face-Mount Joist Hanger is designed to provide strong, stable, and secure connections for wood framing applications. Whether you're working with solid sawn lumber or engineered wood, this hanger ensures proper load distribution, helping to maintain structural integrity over time. Its precision-engineered design delivers a tight fit and maximum bearing, reducing the risk of joist rotation or misalignment.\u003c\/p\u003e\n\u003cp\u003eCrafted from high-quality galvanized steel, the U hanger provides exceptional corrosion resistance for long-lasting durability in a variety of indoor and outdoor projects. With its versatile face-mount design, this joist hanger is ideal for residential, commercial, and industrial framing applications.\u003c\/p\u003e\n\u003ch3\u003eKey Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Compatibility:\u003c\/strong\u003e Designed for both solid sawn lumber and engineered wood joists, ensuring a secure connection in various framing applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace-Mount Design:\u003c\/strong\u003e Offers easy installation with a flush, secure connection to the supporting member.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized Load Distribution:\u003c\/strong\u003e Provides full bearing support, helping to prevent twisting or shifting under load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGalvanized Steel Construction:\u003c\/strong\u003e Enhances corrosion resistance, making it suitable for interior and protected exterior applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Engineering:\u003c\/strong\u003e Manufactured for tight tolerances and a snug fit, reducing the need for field adjustments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse nails, screws, or Strong-Drive \u003ca rel=\"noopener\" href=\"https:\/\/www.fastenersplus.com\/collections\/simpson-sds-heavy-duty-connector-screws\" target=\"_blank\"\u003eSDS Heavy-Duty Connector screws\u003c\/a\u003e as specified for the application. Always refer to local building codes and manufacturer guidelines.\u003c\/li\u003e\n\u003cli\u003eThe joist should be fully seated in the hanger to achieve maximum bearing support.\u003c\/li\u003e\n\u003cli\u003eInstall fasteners into all available nail holes for optimal strength and stability.\u003c\/li\u003e\n\u003cli\u003eEnsure that the selected hanger meets the required load capacity for your specific application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeck Framing:\u003c\/strong\u003e Secures joists to beams, ensuring a stable and long-lasting deck structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloor Joists:\u003c\/strong\u003e Supports floor framing systems in residential and commercial buildings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoof Framing:\u003c\/strong\u003e Provides strong connections for rafters and ceiling joists, preventing misalignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePergolas \u0026amp; Outdoor Structures:\u003c\/strong\u003e Helps maintain stability and load distribution in exposed wood-framed designs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeneral Wood Construction:\u003c\/strong\u003e Ideal for interior and exterior framing applications requiring a secure joist-to-beam connection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eNOTE: The correct fasteners installed in the correct position must be used to achieve published load values\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCalifornia Residents: \u003ca style=\"color: black;\" href=\"\/prop-65\" target=\"_blank\"\u003eWARNING\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":34273651228808,"sku":"U414","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/8644\/4936\/products\/U414.01.jpg?v=1594747309"},{"product_id":"simpson-u44-4x4-face-mount-joist-hanger-g90-galvanized","title":"Simpson Strong-Tie U44 4x4 Face Mount Joist Hanger - G90 Galvanized","description":"\u003cp\u003eThe Simpson Strong-Tie U Face-Mount Joist Hanger is designed to provide strong, stable, and secure connections for wood framing applications. Whether you're working with solid sawn lumber or engineered wood, this hanger ensures proper load distribution, helping to maintain structural integrity over time. Its precision-engineered design delivers a tight fit and maximum bearing, reducing the risk of joist rotation or misalignment.\u003c\/p\u003e\n\u003cp\u003eCrafted from high-quality galvanized steel, the U hanger provides exceptional corrosion resistance for long-lasting durability in a variety of indoor and outdoor projects. With its versatile face-mount design, this joist hanger is ideal for residential, commercial, and industrial framing applications.\u003c\/p\u003e\n\u003ch3\u003eKey Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Compatibility:\u003c\/strong\u003e Designed for both solid sawn lumber and engineered wood joists, ensuring a secure connection in various framing applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace-Mount Design:\u003c\/strong\u003e Offers easy installation with a flush, secure connection to the supporting member.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized Load Distribution:\u003c\/strong\u003e Provides full bearing support, helping to prevent twisting or shifting under load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGalvanized Steel Construction:\u003c\/strong\u003e Enhances corrosion resistance, making it suitable for interior and protected exterior applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Engineering:\u003c\/strong\u003e Manufactured for tight tolerances and a snug fit, reducing the need for field adjustments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse nails, screws, or Strong-Drive \u003ca rel=\"noopener\" href=\"https:\/\/www.fastenersplus.com\/collections\/simpson-sds-heavy-duty-connector-screws\" target=\"_blank\"\u003eSDS Heavy-Duty Connector screws\u003c\/a\u003e as specified for the application. Always refer to local building codes and manufacturer guidelines.\u003c\/li\u003e\n\u003cli\u003eThe joist should be fully seated in the hanger to achieve maximum bearing support.\u003c\/li\u003e\n\u003cli\u003eInstall fasteners into all available nail holes for optimal strength and stability.\u003c\/li\u003e\n\u003cli\u003eEnsure that the selected hanger meets the required load capacity for your specific application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeck Framing:\u003c\/strong\u003e Secures joists to beams, ensuring a stable and long-lasting deck structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloor Joists:\u003c\/strong\u003e Supports floor framing systems in residential and commercial buildings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoof Framing:\u003c\/strong\u003e Provides strong connections for rafters and ceiling joists, preventing misalignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePergolas \u0026amp; Outdoor Structures:\u003c\/strong\u003e Helps maintain stability and load distribution in exposed wood-framed designs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeneral Wood Construction:\u003c\/strong\u003e Ideal for interior and exterior framing applications requiring a secure joist-to-beam connection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eNOTE: The correct fasteners installed in the correct position must be used to achieve published load values\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCalifornia Residents: \u003ca style=\"color: black;\" href=\"\/prop-65\" target=\"_blank\"\u003eWARNING\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":34273652670600,"sku":"U44","price":5.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/8644\/4936\/products\/U24-2.01_83e4a70b-976b-429e-b068-7a1493a35ef2.jpg?v=1594747308"},{"product_id":"simpson-u46-4x6-face-mount-joist-hanger-g90-galvanized","title":"Simpson Strong-Tie U46 4x6 Face Mount Joist Hanger - G90 Galvanized","description":"\u003cp\u003eThe Simpson Strong-Tie U Face-Mount Joist Hanger is designed to provide strong, stable, and secure connections for wood framing applications. Whether you're working with solid sawn lumber or engineered wood, this hanger ensures proper load distribution, helping to maintain structural integrity over time. Its precision-engineered design delivers a tight fit and maximum bearing, reducing the risk of joist rotation or misalignment.\u003c\/p\u003e\n\u003cp\u003eCrafted from high-quality galvanized steel, the U hanger provides exceptional corrosion resistance for long-lasting durability in a variety of indoor and outdoor projects. With its versatile face-mount design, this joist hanger is ideal for residential, commercial, and industrial framing applications.\u003c\/p\u003e\n\u003ch3\u003eKey Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Compatibility:\u003c\/strong\u003e Designed for both solid sawn lumber and engineered wood joists, ensuring a secure connection in various framing applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace-Mount Design:\u003c\/strong\u003e Offers easy installation with a flush, secure connection to the supporting member.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized Load Distribution:\u003c\/strong\u003e Provides full bearing support, helping to prevent twisting or shifting under load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGalvanized Steel Construction:\u003c\/strong\u003e Enhances corrosion resistance, making it suitable for interior and protected exterior applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Engineering:\u003c\/strong\u003e Manufactured for tight tolerances and a snug fit, reducing the need for field adjustments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse nails, screws, or Strong-Drive \u003ca rel=\"noopener\" href=\"https:\/\/www.fastenersplus.com\/collections\/simpson-sds-heavy-duty-connector-screws\" target=\"_blank\"\u003eSDS Heavy-Duty Connector screws\u003c\/a\u003e as specified for the application. Always refer to local building codes and manufacturer guidelines.\u003c\/li\u003e\n\u003cli\u003eThe joist should be fully seated in the hanger to achieve maximum bearing support.\u003c\/li\u003e\n\u003cli\u003eInstall fasteners into all available nail holes for optimal strength and stability.\u003c\/li\u003e\n\u003cli\u003eEnsure that the selected hanger meets the required load capacity for your specific application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeck Framing:\u003c\/strong\u003e Secures joists to beams, ensuring a stable and long-lasting deck structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloor Joists:\u003c\/strong\u003e Supports floor framing systems in residential and commercial buildings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoof Framing:\u003c\/strong\u003e Provides strong connections for rafters and ceiling joists, preventing misalignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePergolas \u0026amp; Outdoor Structures:\u003c\/strong\u003e Helps maintain stability and load distribution in exposed wood-framed designs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeneral Wood Construction:\u003c\/strong\u003e Ideal for interior and exterior framing applications requiring a secure joist-to-beam connection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eNOTE: The correct fasteners installed in the correct position must be used to achieve published load values\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCalifornia Residents: \u003ca style=\"color: black;\" href=\"\/prop-65\" target=\"_blank\"\u003eWARNING\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":34273654145160,"sku":"U46","price":5.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/8644\/4936\/products\/U46R.01_c9737ccd-775e-40e8-8a40-911c3a97e61a.jpg?v=1594747305"},{"product_id":"simpson-u610-6x10-face-mount-joist-hanger-g90-galvanized","title":"Simpson Strong-Tie U610 6x10 Face Mount Joist Hanger - G90 Galvanized","description":"\u003cp\u003eThe Simpson Strong-Tie U Face-Mount Joist Hanger is designed to provide strong, stable, and secure connections for wood framing applications. Whether you're working with solid sawn lumber or engineered wood, this hanger ensures proper load distribution, helping to maintain structural integrity over time. Its precision-engineered design delivers a tight fit and maximum bearing, reducing the risk of joist rotation or misalignment.\u003c\/p\u003e\n\u003cp\u003eCrafted from high-quality galvanized steel, the U hanger provides exceptional corrosion resistance for long-lasting durability in a variety of indoor and outdoor projects. With its versatile face-mount design, this joist hanger is ideal for residential, commercial, and industrial framing applications.\u003c\/p\u003e\n\u003ch3\u003eKey Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Compatibility:\u003c\/strong\u003e Designed for both solid sawn lumber and engineered wood joists, ensuring a secure connection in various framing applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace-Mount Design:\u003c\/strong\u003e Offers easy installation with a flush, secure connection to the supporting member.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized Load Distribution:\u003c\/strong\u003e Provides full bearing support, helping to prevent twisting or shifting under load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGalvanized Steel Construction:\u003c\/strong\u003e Enhances corrosion resistance, making it suitable for interior and protected exterior applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Engineering:\u003c\/strong\u003e Manufactured for tight tolerances and a snug fit, reducing the need for field adjustments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse nails, screws, or Strong-Drive \u003ca rel=\"noopener\" href=\"https:\/\/www.fastenersplus.com\/collections\/simpson-sds-heavy-duty-connector-screws\" target=\"_blank\"\u003eSDS Heavy-Duty Connector screws\u003c\/a\u003e as specified for the application. Always refer to local building codes and manufacturer guidelines.\u003c\/li\u003e\n\u003cli\u003eThe joist should be fully seated in the hanger to achieve maximum bearing support.\u003c\/li\u003e\n\u003cli\u003eInstall fasteners into all available nail holes for optimal strength and stability.\u003c\/li\u003e\n\u003cli\u003eEnsure that the selected hanger meets the required load capacity for your specific application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeck Framing:\u003c\/strong\u003e Secures joists to beams, ensuring a stable and long-lasting deck structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloor Joists:\u003c\/strong\u003e Supports floor framing systems in residential and commercial buildings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoof Framing:\u003c\/strong\u003e Provides strong connections for rafters and ceiling joists, preventing misalignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePergolas \u0026amp; Outdoor Structures:\u003c\/strong\u003e Helps maintain stability and load distribution in exposed wood-framed designs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeneral Wood Construction:\u003c\/strong\u003e Ideal for interior and exterior framing applications requiring a secure joist-to-beam connection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eNOTE: The correct fasteners installed in the correct position must be used to achieve published load values\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCalifornia Residents: \u003ca style=\"color: black;\" href=\"\/prop-65\" target=\"_blank\"\u003eWARNING\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":34273656995976,"sku":"U610","price":20.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/8644\/4936\/products\/U210-3.01_4ca72aa8-512f-4bcc-9fa4-c25c5658074d.jpg?v=1594747298"},{"product_id":"simpson-u66-6x6-face-mount-joist-hanger-g90-galvanized","title":"Simpson Strong-Tie U66 6x6 Face Mount Joist Hanger - G90 Galvanized","description":"\u003cp\u003eThe Simpson Strong-Tie U Face-Mount Joist Hanger is designed to provide strong, stable, and secure connections for wood framing applications. Whether you're working with solid sawn lumber or engineered wood, this hanger ensures proper load distribution, helping to maintain structural integrity over time. Its precision-engineered design delivers a tight fit and maximum bearing, reducing the risk of joist rotation or misalignment.\u003c\/p\u003e\n\u003cp\u003eCrafted from high-quality galvanized steel, the U hanger provides exceptional corrosion resistance for long-lasting durability in a variety of indoor and outdoor projects. With its versatile face-mount design, this joist hanger is ideal for residential, commercial, and industrial framing applications.\u003c\/p\u003e\n\u003ch3\u003eKey Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Compatibility:\u003c\/strong\u003e Designed for both solid sawn lumber and engineered wood joists, ensuring a secure connection in various framing applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace-Mount Design:\u003c\/strong\u003e Offers easy installation with a flush, secure connection to the supporting member.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized Load Distribution:\u003c\/strong\u003e Provides full bearing support, helping to prevent twisting or shifting under load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGalvanized Steel Construction:\u003c\/strong\u003e Enhances corrosion resistance, making it suitable for interior and protected exterior applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Engineering:\u003c\/strong\u003e Manufactured for tight tolerances and a snug fit, reducing the need for field adjustments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse nails, screws, or Strong-Drive \u003ca rel=\"noopener\" href=\"https:\/\/www.fastenersplus.com\/collections\/simpson-sds-heavy-duty-connector-screws\" target=\"_blank\"\u003eSDS Heavy-Duty Connector screws\u003c\/a\u003e as specified for the application. Always refer to local building codes and manufacturer guidelines.\u003c\/li\u003e\n\u003cli\u003eThe joist should be fully seated in the hanger to achieve maximum bearing support.\u003c\/li\u003e\n\u003cli\u003eInstall fasteners into all available nail holes for optimal strength and stability.\u003c\/li\u003e\n\u003cli\u003eEnsure that the selected hanger meets the required load capacity for your specific application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeck Framing:\u003c\/strong\u003e Secures joists to beams, ensuring a stable and long-lasting deck structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloor Joists:\u003c\/strong\u003e Supports floor framing systems in residential and commercial buildings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoof Framing:\u003c\/strong\u003e Provides strong connections for rafters and ceiling joists, preventing misalignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePergolas \u0026amp; Outdoor Structures:\u003c\/strong\u003e Helps maintain stability and load distribution in exposed wood-framed designs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeneral Wood Construction:\u003c\/strong\u003e Ideal for interior and exterior framing applications requiring a secure joist-to-beam connection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eNOTE: The correct fasteners installed in the correct position must be used to achieve published load values\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCalifornia Residents: \u003ca style=\"color: black;\" href=\"\/prop-65\" target=\"_blank\"\u003eWARNING\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":34273663352968,"sku":"U66","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/8644\/4936\/products\/U66.01_fd745445-1b10-4784-bc03-0ee7cfcb27af.jpg?v=1594747296"},{"product_id":"simpson-2-5-16x11-7-8-face-mount-i-joist-hanger-g90-galvanized_2","title":"Simpson Strong-Tie U3516\/20 Face Mount Joist Hanger - G90 Galvanized","description":"\u003cp\u003eThe Simpson Strong-Tie U Face-Mount Joist Hanger is designed to provide strong, stable, and secure connections for wood framing applications. Whether you're working with solid sawn lumber or engineered wood, this hanger ensures proper load distribution, helping to maintain structural integrity over time. Its precision-engineered design delivers a tight fit and maximum bearing, reducing the risk of joist rotation or misalignment.\u003c\/p\u003e\n\u003cp\u003eCrafted from high-quality galvanized steel, the U hanger provides exceptional corrosion resistance for long-lasting durability in a variety of indoor and outdoor projects. With its versatile face-mount design, this joist hanger is ideal for residential, commercial, and industrial framing applications.\u003c\/p\u003e\n\u003ch3\u003eKey Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Compatibility:\u003c\/strong\u003e Designed for both solid sawn lumber and engineered wood joists, ensuring a secure connection in various framing applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace-Mount Design:\u003c\/strong\u003e Offers easy installation with a flush, secure connection to the supporting member.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized Load Distribution:\u003c\/strong\u003e Provides full bearing support, helping to prevent twisting or shifting under load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGalvanized Steel Construction:\u003c\/strong\u003e Enhances corrosion resistance, making it suitable for interior and protected exterior applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Engineering:\u003c\/strong\u003e Manufactured for tight tolerances and a snug fit, reducing the need for field adjustments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse nails, screws, or Strong-Drive \u003ca rel=\"noopener\" href=\"https:\/\/www.fastenersplus.com\/collections\/simpson-sds-heavy-duty-connector-screws\" target=\"_blank\"\u003eSDS Heavy-Duty Connector screws\u003c\/a\u003e as specified for the application. Always refer to local building codes and manufacturer guidelines.\u003c\/li\u003e\n\u003cli\u003eThe joist should be fully seated in the hanger to achieve maximum bearing support.\u003c\/li\u003e\n\u003cli\u003eInstall fasteners into all available nail holes for optimal strength and stability.\u003c\/li\u003e\n\u003cli\u003eEnsure that the selected hanger meets the required load capacity for your specific application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeck Framing:\u003c\/strong\u003e Secures joists to beams, ensuring a stable and long-lasting deck structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloor Joists:\u003c\/strong\u003e Supports floor framing systems in residential and commercial buildings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoof Framing:\u003c\/strong\u003e Provides strong connections for rafters and ceiling joists, preventing misalignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePergolas \u0026amp; Outdoor Structures:\u003c\/strong\u003e Helps maintain stability and load distribution in exposed wood-framed designs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeneral Wood Construction:\u003c\/strong\u003e Ideal for interior and exterior framing applications requiring a secure joist-to-beam connection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eNOTE: The correct fasteners installed in the correct position must be used to achieve published load values\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCalifornia Residents: \u003ca style=\"color: black;\" href=\"\/prop-65\" target=\"_blank\"\u003eWARNING\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":34274023342216,"sku":"U3516\/20","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/8644\/4936\/products\/U3516-20.01.jpg?v=1594747315"},{"product_id":"simpson-u3510-14-face-mount-i-joist-hanger-g90-galvanized","title":"Simpson Strong-Tie U3510\/14 Face Mount I-Joist Hanger- G90 Galvanized","description":"\u003cp\u003eThe Simpson Strong-Tie U Face-Mount Joist Hanger is designed to provide strong, stable, and secure connections for wood framing applications. Whether you're working with solid sawn lumber or engineered wood, this hanger ensures proper load distribution, helping to maintain structural integrity over time. Its precision-engineered design delivers a tight fit and maximum bearing, reducing the risk of joist rotation or misalignment.\u003c\/p\u003e\n\u003cp\u003eCrafted from high-quality galvanized steel, the U hanger provides exceptional corrosion resistance for long-lasting durability in a variety of indoor and outdoor projects. With its versatile face-mount design, this joist hanger is ideal for residential, commercial, and industrial framing applications.\u003c\/p\u003e\n\u003ch3\u003eKey Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Compatibility:\u003c\/strong\u003e Designed for both solid sawn lumber and engineered wood joists, ensuring a secure connection in various framing applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace-Mount Design:\u003c\/strong\u003e Offers easy installation with a flush, secure connection to the supporting member.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized Load Distribution:\u003c\/strong\u003e Provides full bearing support, helping to prevent twisting or shifting under load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGalvanized Steel Construction:\u003c\/strong\u003e Enhances corrosion resistance, making it suitable for interior and protected exterior applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Engineering:\u003c\/strong\u003e Manufactured for tight tolerances and a snug fit, reducing the need for field adjustments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse nails, screws, or Strong-Drive \u003ca rel=\"noopener\" href=\"https:\/\/www.fastenersplus.com\/collections\/simpson-sds-heavy-duty-connector-screws\" target=\"_blank\"\u003eSDS Heavy-Duty Connector screws\u003c\/a\u003e as specified for the application. Always refer to local building codes and manufacturer guidelines.\u003c\/li\u003e\n\u003cli\u003eThe joist should be fully seated in the hanger to achieve maximum bearing support.\u003c\/li\u003e\n\u003cli\u003eInstall fasteners into all available nail holes for optimal strength and stability.\u003c\/li\u003e\n\u003cli\u003eEnsure that the selected hanger meets the required load capacity for your specific application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeck Framing:\u003c\/strong\u003e Secures joists to beams, ensuring a stable and long-lasting deck structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloor Joists:\u003c\/strong\u003e Supports floor framing systems in residential and commercial buildings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoof Framing:\u003c\/strong\u003e Provides strong connections for rafters and ceiling joists, preventing misalignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePergolas \u0026amp; Outdoor Structures:\u003c\/strong\u003e Helps maintain stability and load distribution in exposed wood-framed designs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeneral Wood Construction:\u003c\/strong\u003e Ideal for interior and exterior framing applications requiring a secure joist-to-beam connection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eNOTE: The correct fasteners installed in the correct position must be used to achieve published load values\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCalifornia Residents: \u003ca style=\"color: black;\" href=\"\/prop-65\" target=\"_blank\"\u003eWARNING\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":34274028257416,"sku":"U3510\/14","price":18.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/8644\/4936\/products\/U3510-14.01.jpg?v=1594747319"},{"product_id":"hang-em-fast-joist-hanger-installation-tool","title":"Hang Em Fast Joist Hanger Installation Tool","description":"\u003cp\u003eThe Hang Em' Fast joist hanger tool sets your 2x joist hangers perfectly every time. This tool is designed with efficiency and ease of use in mind for accurate joist hanger installation. Just slide your hanger into the tool, line the tool up with your mark while the bottom lip of the tool is flush with the ledger board and nail your hanger in. This tool is compatible for use with 2x4, 2x6, 2x8, 2x10 and 2x12 hangers.\u003c\/p\u003e","brand":"HangEm Fast","offers":[{"title":"Default Title","offer_id":34276014227592,"sku":"HANGEMFAST","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/8644\/4936\/products\/hangemfast.01.jpg?v=1594840809"},{"product_id":"simpson-u14-face-mount-joist-hanger-g90-galvanized","title":"Simpson Strong-Tie U14 Face Mount Joist Hanger - G90 Galvanized","description":"\u003cp\u003eThe Simpson Strong-Tie U Face-Mount Joist Hanger is designed to provide strong, stable, and secure connections for wood framing applications. Whether you're working with solid sawn lumber or engineered wood, this hanger ensures proper load distribution, helping to maintain structural integrity over time. Its precision-engineered design delivers a tight fit and maximum bearing, reducing the risk of joist rotation or misalignment.\u003c\/p\u003e\n\u003cp\u003eCrafted from high-quality galvanized steel, the U hanger provides exceptional corrosion resistance for long-lasting durability in a variety of indoor and outdoor projects. With its versatile face-mount design, this joist hanger is ideal for residential, commercial, and industrial framing applications.\u003c\/p\u003e\n\u003ch3\u003eKey Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Compatibility:\u003c\/strong\u003e Designed for both solid sawn lumber and engineered wood joists, ensuring a secure connection in various framing applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace-Mount Design:\u003c\/strong\u003e Offers easy installation with a flush, secure connection to the supporting member.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized Load Distribution:\u003c\/strong\u003e Provides full bearing support, helping to prevent twisting or shifting under load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGalvanized Steel Construction:\u003c\/strong\u003e Enhances corrosion resistance, making it suitable for interior and protected exterior applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Engineering:\u003c\/strong\u003e Manufactured for tight tolerances and a snug fit, reducing the need for field adjustments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse nails, screws, or Strong-Drive \u003ca rel=\"noopener\" href=\"https:\/\/www.fastenersplus.com\/collections\/simpson-sds-heavy-duty-connector-screws\" target=\"_blank\"\u003eSDS Heavy-Duty Connector screws\u003c\/a\u003e as specified for the application. Always refer to local building codes and manufacturer guidelines.\u003c\/li\u003e\n\u003cli\u003eThe joist should be fully seated in the hanger to achieve maximum bearing support.\u003c\/li\u003e\n\u003cli\u003eInstall fasteners into all available nail holes for optimal strength and stability.\u003c\/li\u003e\n\u003cli\u003eEnsure that the selected hanger meets the required load capacity for your specific application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeck Framing:\u003c\/strong\u003e Secures joists to beams, ensuring a stable and long-lasting deck structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloor Joists:\u003c\/strong\u003e Supports floor framing systems in residential and commercial buildings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoof Framing:\u003c\/strong\u003e Provides strong connections for rafters and ceiling joists, preventing misalignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePergolas \u0026amp; Outdoor Structures:\u003c\/strong\u003e Helps maintain stability and load distribution in exposed wood-framed designs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeneral Wood Construction:\u003c\/strong\u003e Ideal for interior and exterior framing applications requiring a secure joist-to-beam connection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eNOTE: The correct fasteners installed in the correct position must be used to achieve published load values\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCalifornia Residents: \u003ca style=\"color: black;\" href=\"\/prop-65\" target=\"_blank\"\u003eWARNING\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":41072903684232,"sku":"U14","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/8644\/4936\/products\/U_Face-Mount_Joist_Hanger_U210-2_shown.jpg?v=1678985012"},{"product_id":"simpson-u2-1-4-face-mount-joist-hanger-g90-galvanized-made-to-order","title":"Simpson Strong-Tie U2.1\/4 Face Mount Joist Hanger - G90 Galvanized, Made to Order Non Returnable","description":"\u003cp\u003eThe Simpson Strong-Tie U Face-Mount Joist Hanger is designed to provide strong, stable, and secure connections for wood framing applications. Whether you're working with solid sawn lumber or engineered wood, this hanger ensures proper load distribution, helping to maintain structural integrity over time. Its precision-engineered design delivers a tight fit and maximum bearing, reducing the risk of joist rotation or misalignment.\u003c\/p\u003e\n\u003cp\u003eCrafted from high-quality galvanized steel, the U hanger provides exceptional corrosion resistance for long-lasting durability in a variety of indoor and outdoor projects. With its versatile face-mount design, this joist hanger is ideal for residential, commercial, and industrial framing applications.\u003c\/p\u003e\n\u003ch3\u003eKey Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Compatibility:\u003c\/strong\u003e Designed for both solid sawn lumber and engineered wood joists, ensuring a secure connection in various framing applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace-Mount Design:\u003c\/strong\u003e Offers easy installation with a flush, secure connection to the supporting member.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized Load Distribution:\u003c\/strong\u003e Provides full bearing support, helping to prevent twisting or shifting under load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGalvanized Steel Construction:\u003c\/strong\u003e Enhances corrosion resistance, making it suitable for interior and protected exterior applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Engineering:\u003c\/strong\u003e Manufactured for tight tolerances and a snug fit, reducing the need for field adjustments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse nails, screws, or Strong-Drive \u003ca rel=\"noopener\" href=\"https:\/\/www.fastenersplus.com\/collections\/simpson-sds-heavy-duty-connector-screws\" target=\"_blank\"\u003eSDS Heavy-Duty Connector screws\u003c\/a\u003e as specified for the application. Always refer to local building codes and manufacturer guidelines.\u003c\/li\u003e\n\u003cli\u003eThe joist should be fully seated in the hanger to achieve maximum bearing support.\u003c\/li\u003e\n\u003cli\u003eInstall fasteners into all available nail holes for optimal strength and stability.\u003c\/li\u003e\n\u003cli\u003eEnsure that the selected hanger meets the required load capacity for your specific application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeck Framing:\u003c\/strong\u003e Secures joists to beams, ensuring a stable and long-lasting deck structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloor Joists:\u003c\/strong\u003e Supports floor framing systems in residential and commercial buildings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoof Framing:\u003c\/strong\u003e Provides strong connections for rafters and ceiling joists, preventing misalignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePergolas \u0026amp; Outdoor Structures:\u003c\/strong\u003e Helps maintain stability and load distribution in exposed wood-framed designs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeneral Wood Construction:\u003c\/strong\u003e Ideal for interior and exterior framing applications requiring a secure joist-to-beam connection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eNOTE: The correct fasteners installed in the correct position must be used to achieve published load values\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCalifornia Residents: \u003ca style=\"color: black;\" href=\"\/prop-65\" target=\"_blank\"\u003eWARNING\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":41072903782536,"sku":"U2.1\/4","price":18.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/8644\/4936\/products\/U_Face-Mount_Joist_Hanger_U210-2_shown_aabf125d-9043-4f16-b5a6-00df07813dec.jpg?v=1678985013"},{"product_id":"simpson-u210z-2x10-face-mount-joist-hanger-zmax","title":"Simpson Strong-Tie U210Z 2x10 Face Mount Joist Hanger - ZMAX","description":"\u003cp\u003eThe Simpson Strong-Tie U Face-Mount Joist Hanger is designed to provide strong, stable, and secure connections for wood framing applications. Whether you're working with solid sawn lumber or engineered wood, this hanger ensures proper load distribution, helping to maintain structural integrity over time. Its precision-engineered design delivers a tight fit and maximum bearing, reducing the risk of joist rotation or misalignment.\u003c\/p\u003e\n\u003cp\u003eCrafted from high-quality galvanized steel, the U hanger provides exceptional corrosion resistance for long-lasting durability in a variety of indoor and outdoor projects. With its versatile face-mount design, this joist hanger is ideal for residential, commercial, and industrial framing applications.\u003c\/p\u003e\n\u003ch3\u003eKey Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Compatibility:\u003c\/strong\u003e Designed for both solid sawn lumber and engineered wood joists, ensuring a secure connection in various framing applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace-Mount Design:\u003c\/strong\u003e Offers easy installation with a flush, secure connection to the supporting member.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized Load Distribution:\u003c\/strong\u003e Provides full bearing support, helping to prevent twisting or shifting under load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eZMAX Galvanized Steel Construction:\u003c\/strong\u003e Enhances corrosion resistance, making it suitable for interior and protected exterior applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Engineering:\u003c\/strong\u003e Manufactured for tight tolerances and a snug fit, reducing the need for field adjustments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse nails, screws, or Strong-Drive \u003ca href=\"https:\/\/www.fastenersplus.com\/collections\/simpson-sds-heavy-duty-connector-screws\" rel=\"noopener\" target=\"_blank\"\u003eSDS Heavy-Duty Connector screws\u003c\/a\u003e as specified for the application. Always refer to local building codes and manufacturer guidelines.\u003c\/li\u003e\n\u003cli\u003e The joist should be fully seated in the hanger to achieve maximum bearing support.\u003c\/li\u003e\n\u003cli\u003e Install fasteners into all available nail holes for optimal strength and stability.\u003c\/li\u003e\n\u003cli\u003e Ensure that the selected hanger meets the required load capacity for your specific application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeck Framing:\u003c\/strong\u003e Secures joists to beams, ensuring a stable and long-lasting deck structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloor Joists:\u003c\/strong\u003e Supports floor framing systems in residential and commercial buildings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoof Framing:\u003c\/strong\u003e Provides strong connections for rafters and ceiling joists, preventing misalignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePergolas \u0026amp; Outdoor Structures:\u003c\/strong\u003e Helps maintain stability and load distribution in exposed wood-framed designs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeneral Wood Construction:\u003c\/strong\u003e Ideal for interior and exterior framing applications requiring a secure joist-to-beam connection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eNOTE: The correct fasteners installed in the correct position must be used to achieve published load values\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCalifornia Residents: \u003ca href=\"\/prop-65\" style=\"color: black;\" target=\"_blank\"\u003eWARNING\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":41072904994952,"sku":"U210Z","price":5.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/8644\/4936\/products\/U_Face-Mount_Joist_Hanger_U210-2_shown_d8e33811-4c01-407a-8add-517aaac609ee.jpg?v=1678985014"},{"product_id":"simpson-u410rx-rough-cut-face-mount-hanger-4-x-10-custom-non-returnable","title":"Simpson U410RX Rough Cut Face Mount Hanger 4 X 10, Made to Order Non-Returnable","description":"\u003cp\u003e\u003cstrong\u003eThis item is made to order with varied lead times - Please call us at 888-794-1590 for exact lead times on this product\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Simpson Strong-Tie U Face-Mount Joist Hanger is designed to provide strong, stable, and secure connections for wood framing applications. Whether you're working with solid sawn lumber or engineered wood, this hanger ensures proper load distribution, helping to maintain structural integrity over time. Its precision-engineered design delivers a tight fit and maximum bearing, reducing the risk of joist rotation or misalignment.\u003c\/p\u003e\n\u003cp\u003eCrafted from high-quality galvanized steel, the U hanger provides exceptional corrosion resistance for long-lasting durability in a variety of indoor and outdoor projects. With its versatile face-mount design, this joist hanger is ideal for residential, commercial, and industrial framing applications.\u003c\/p\u003e\n\u003ch3\u003eKey Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Compatibility:\u003c\/strong\u003e Designed for both solid sawn lumber and engineered wood joists, ensuring a secure connection in various framing applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace-Mount Design:\u003c\/strong\u003e Offers easy installation with a flush, secure connection to the supporting member.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized Load Distribution:\u003c\/strong\u003e Provides full bearing support, helping to prevent twisting or shifting under load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGalvanized Steel Construction:\u003c\/strong\u003e Enhances corrosion resistance, making it suitable for interior and protected exterior applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Engineering:\u003c\/strong\u003e Manufactured for tight tolerances and a snug fit, reducing the need for field adjustments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse nails, screws, or Strong-Drive \u003ca href=\"https:\/\/www.fastenersplus.com\/collections\/simpson-sds-heavy-duty-connector-screws\" rel=\"noopener\" target=\"_blank\"\u003eSDS Heavy-Duty Connector screws\u003c\/a\u003e as specified for the application. Always refer to local building codes and manufacturer guidelines.\u003c\/li\u003e\n\u003cli\u003eThe joist should be fully seated in the hanger to achieve maximum bearing support.\u003c\/li\u003e\n\u003cli\u003e Install fasteners into all available nail holes for optimal strength and stability.\u003c\/li\u003e\n\u003cli\u003e Ensure that the selected hanger meets the required load capacity for your specific application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeck Framing:\u003c\/strong\u003e Secures joists to beams, ensuring a stable and long-lasting deck structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloor Joists:\u003c\/strong\u003e Supports floor framing systems in residential and commercial buildings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoof Framing:\u003c\/strong\u003e Provides strong connections for rafters and ceiling joists, preventing misalignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePergolas \u0026amp; Outdoor Structures:\u003c\/strong\u003e Helps maintain stability and load distribution in exposed wood-framed designs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeneral Wood Construction:\u003c\/strong\u003e Ideal for interior and exterior framing applications requiring a secure joist-to-beam connection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eNOTE: The correct fasteners installed in the correct position must be used to achieve published load values\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCalifornia Residents: \u003ca href=\"\/prop-65\" style=\"color: black;\" target=\"_blank\"\u003eWARNING\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":42503131463816,"sku":"U410RX","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/8644\/4936\/files\/U410RX.01.jpg?v=1718043918"},{"product_id":"simpson-u610rx-rough-cut-face-mount-hanger-6-x-10-custom-non-returnable","title":"Simpson U610RX Rough Cut Face Mount Hanger 6 X 10, Made to Order Non-Returnable","description":"\u003cp\u003e\u003cstrong\u003eThis item is made to order with varied lead times - Please call us at 888-794-1590 for exact lead times on this product\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Simpson Strong-Tie U Face-Mount Joist Hanger is designed to provide strong, stable, and secure connections for wood framing applications. Whether you're working with solid sawn lumber or engineered wood, this hanger ensures proper load distribution, helping to maintain structural integrity over time. Its precision-engineered design delivers a tight fit and maximum bearing, reducing the risk of joist rotation or misalignment.\u003c\/p\u003e\n\u003cp\u003eCrafted from high-quality galvanized steel, the U hanger provides exceptional corrosion resistance for long-lasting durability in a variety of indoor and outdoor projects. With its versatile face-mount design, this joist hanger is ideal for residential, commercial, and industrial framing applications.\u003c\/p\u003e\n\u003ch3\u003eKey Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Compatibility:\u003c\/strong\u003e Designed for both solid sawn lumber and engineered wood joists, ensuring a secure connection in various framing applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace-Mount Design:\u003c\/strong\u003e Offers easy installation with a flush, secure connection to the supporting member.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized Load Distribution:\u003c\/strong\u003e Provides full bearing support, helping to prevent twisting or shifting under load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGalvanized Steel Construction:\u003c\/strong\u003e Enhances corrosion resistance, making it suitable for interior and protected exterior applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Engineering:\u003c\/strong\u003e Manufactured for tight tolerances and a snug fit, reducing the need for field adjustments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse nails, screws, or Strong-Drive \u003ca href=\"https:\/\/www.fastenersplus.com\/collections\/simpson-sds-heavy-duty-connector-screws\" rel=\"noopener\" target=\"_blank\"\u003eSDS Heavy-Duty Connector screws\u003c\/a\u003e as specified for the application. Always refer to local building codes and manufacturer guidelines.\u003c\/li\u003e\n\u003cli\u003eThe joist should be fully seated in the hanger to achieve maximum bearing support.\u003c\/li\u003e\n\u003cli\u003e Install fasteners into all available nail holes for optimal strength and stability.\u003c\/li\u003e\n\u003cli\u003e Ensure that the selected hanger meets the required load capacity for your specific application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeck Framing:\u003c\/strong\u003e Secures joists to beams, ensuring a stable and long-lasting deck structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloor Joists:\u003c\/strong\u003e Supports floor framing systems in residential and commercial buildings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoof Framing:\u003c\/strong\u003e Provides strong connections for rafters and ceiling joists, preventing misalignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePergolas \u0026amp; Outdoor Structures:\u003c\/strong\u003e Helps maintain stability and load distribution in exposed wood-framed designs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeneral Wood Construction:\u003c\/strong\u003e Ideal for interior and exterior framing applications requiring a secure joist-to-beam connection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eNOTE: The correct fasteners installed in the correct position must be used to achieve published load values\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCalifornia Residents: \u003ca href=\"\/prop-65\" style=\"color: black;\" target=\"_blank\"\u003eWARNING\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":42503131529352,"sku":"U610RX","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/8644\/4936\/files\/U410X.01_d160b79a-36e9-4979-8e3a-18c24e7a5aa5.jpg?v=1718044016"},{"product_id":"simpson-u210x-face-mount-hanger-2-x-10-custom-non-returnable","title":"Simpson U210X Face Mount Hanger 2 X 10, Made to Order Non-Returnable","description":"\u003cp\u003e\u003cstrong\u003eThis item is made to order with varied lead times - Please call us at 888-794-1590 for exact lead times on this product\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Simpson Strong-Tie U Face-Mount Joist Hanger is designed to provide strong, stable, and secure connections for wood framing applications. Whether you're working with solid sawn lumber or engineered wood, this hanger ensures proper load distribution, helping to maintain structural integrity over time. Its precision-engineered design delivers a tight fit and maximum bearing, reducing the risk of joist rotation or misalignment.\u003c\/p\u003e\n\u003cp\u003eCrafted from high-quality galvanized steel, the U hanger provides exceptional corrosion resistance for long-lasting durability in a variety of indoor and outdoor projects. With its versatile face-mount design, this joist hanger is ideal for residential, commercial, and industrial framing applications.\u003c\/p\u003e\n\u003ch3\u003eKey Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Compatibility:\u003c\/strong\u003e Designed for both solid sawn lumber and engineered wood joists, ensuring a secure connection in various framing applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace-Mount Design:\u003c\/strong\u003e Offers easy installation with a flush, secure connection to the supporting member.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized Load Distribution:\u003c\/strong\u003e Provides full bearing support, helping to prevent twisting or shifting under load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGalvanized Steel Construction:\u003c\/strong\u003e Enhances corrosion resistance, making it suitable for interior and protected exterior applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Engineering:\u003c\/strong\u003e Manufactured for tight tolerances and a snug fit, reducing the need for field adjustments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse nails, screws, or Strong-Drive \u003ca href=\"https:\/\/www.fastenersplus.com\/collections\/simpson-sds-heavy-duty-connector-screws\" rel=\"noopener\" target=\"_blank\"\u003eSDS Heavy-Duty Connector screws\u003c\/a\u003e as specified for the application. Always refer to local building codes and manufacturer guidelines.\u003c\/li\u003e\n\u003cli\u003eThe joist should be fully seated in the hanger to achieve maximum bearing support.\u003c\/li\u003e\n\u003cli\u003e Install fasteners into all available nail holes for optimal strength and stability.\u003c\/li\u003e\n\u003cli\u003e Ensure that the selected hanger meets the required load capacity for your specific application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeck Framing:\u003c\/strong\u003e Secures joists to beams, ensuring a stable and long-lasting deck structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloor Joists:\u003c\/strong\u003e Supports floor framing systems in residential and commercial buildings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoof Framing:\u003c\/strong\u003e Provides strong connections for rafters and ceiling joists, preventing misalignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePergolas \u0026amp; Outdoor Structures:\u003c\/strong\u003e Helps maintain stability and load distribution in exposed wood-framed designs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeneral Wood Construction:\u003c\/strong\u003e Ideal for interior and exterior framing applications requiring a secure joist-to-beam connection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eNOTE: The correct fasteners installed in the correct position must be used to achieve published load values\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCalifornia Residents: \u003ca href=\"\/prop-65\" style=\"color: black;\" target=\"_blank\"\u003eWARNING\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":42503132119176,"sku":"U210X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/8644\/4936\/files\/U210X.01.jpg?v=1718043797"},{"product_id":"simpson-u410x-face-mount-hanger-4-x-10-custom-non-returnable","title":"Simpson U410X Face Mount Hanger 4 X 10, Made to Order Non-Returnable","description":"\u003cp\u003e\u003cstrong\u003eThis item is made to order with varied lead times - Please call us at 888-794-1590 for exact lead times on this product\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Simpson Strong-Tie U Face-Mount Joist Hanger is designed to provide strong, stable, and secure connections for wood framing applications. Whether you're working with solid sawn lumber or engineered wood, this hanger ensures proper load distribution, helping to maintain structural integrity over time. Its precision-engineered design delivers a tight fit and maximum bearing, reducing the risk of joist rotation or misalignment.\u003c\/p\u003e\n\u003cp\u003eCrafted from high-quality galvanized steel, the U hanger provides exceptional corrosion resistance for long-lasting durability in a variety of indoor and outdoor projects. With its versatile face-mount design, this joist hanger is ideal for residential, commercial, and industrial framing applications.\u003c\/p\u003e\n\u003ch3\u003eKey Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Compatibility:\u003c\/strong\u003e Designed for both solid sawn lumber and engineered wood joists, ensuring a secure connection in various framing applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace-Mount Design:\u003c\/strong\u003e Offers easy installation with a flush, secure connection to the supporting member.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized Load Distribution:\u003c\/strong\u003e Provides full bearing support, helping to prevent twisting or shifting under load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGalvanized Steel Construction:\u003c\/strong\u003e Enhances corrosion resistance, making it suitable for interior and protected exterior applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Engineering:\u003c\/strong\u003e Manufactured for tight tolerances and a snug fit, reducing the need for field adjustments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse nails, screws, or Strong-Drive \u003ca href=\"https:\/\/www.fastenersplus.com\/collections\/simpson-sds-heavy-duty-connector-screws\" rel=\"noopener\" target=\"_blank\"\u003eSDS Heavy-Duty Connector screws\u003c\/a\u003e as specified for the application. Always refer to local building codes and manufacturer guidelines.\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eThe joist should be fully seated in the hanger to achieve maximum bearing support.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eInstall fasteners into all available nail holes for optimal strength and stability.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eEnsure that the selected hanger meets the required load capacity for your specific application.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeck Framing:\u003c\/strong\u003e Secures joists to beams, ensuring a stable and long-lasting deck structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloor Joists:\u003c\/strong\u003e Supports floor framing systems in residential and commercial buildings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoof Framing:\u003c\/strong\u003e Provides strong connections for rafters and ceiling joists, preventing misalignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePergolas \u0026amp; Outdoor Structures:\u003c\/strong\u003e Helps maintain stability and load distribution in exposed wood-framed designs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeneral Wood Construction:\u003c\/strong\u003e Ideal for interior and exterior framing applications requiring a secure joist-to-beam connection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eNOTE: The correct fasteners installed in the correct position must be used to achieve published load values\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCalifornia Residents: \u003ca href=\"\/prop-65\" style=\"color: black;\" target=\"_blank\"\u003eWARNING\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":42503132151944,"sku":"U410X","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/8644\/4936\/files\/U410X.01.jpg?v=1718043973"},{"product_id":"simpson-strong-tie-lus26pc-2x6-decorative-joist-hanger-black-powder-coat-zmax","title":"Simpson Strong-Tie LUS26PC 2x6 Decorative Joist Hanger - Black Powder Coat, ZMAX","description":"\u003cp\u003eSimpson Strong-Tie LUSPC Light Capacity Joist Hangers connect joists to beams or ledgers while matching the clean black look of the Outdoor Accents collection. Made from 18-gauge ZMAX galvanized steel with a black powder-coat finish, these face-mount joist hangers provide corrosion resistance, code-compliant performance, and decorative appeal for outdoor wood structures. The LUSPC series uses double-shear fastening, which distributes the load through two points on each connector screw for added strength with fewer fasteners.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutdoor Accents Design:\u003c\/strong\u003e Coordinates with Simpson Strong-Tie Outdoor Accents decorative hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJoist-to-Beam Connection:\u003c\/strong\u003e Designed to quickly attach joists to beams or ledgers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble-Shear Fastening:\u003c\/strong\u003e Distributes load through two points on each connector screw for added strength with fewer fasteners.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Construction:\u003c\/strong\u003e Made from 18-gauge steel for dependable performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eZMAX with Black Powder Coat:\u003c\/strong\u003e Provides corrosion resistance with a clean decorative finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCode-Compliant Performance:\u003c\/strong\u003e Tested, load rated, and code compliant.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommon Deck Sizes:\u003c\/strong\u003e Available in sizes that match typical deck joist dimensions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor-Matched Fasteners:\u003c\/strong\u003e Installs with Simpson Outdoor Accents connector screws, sold separately.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDeck framing\u003c\/li\u003e\n\u003cli\u003ePergolas\u003c\/li\u003e\n\u003cli\u003ePavilions\u003c\/li\u003e\n\u003cli\u003ePatio covers\u003c\/li\u003e\n\u003cli\u003eOutdoor living structures\u003c\/li\u003e\n\u003cli\u003eJoist-to-beam connections\u003c\/li\u003e\n\u003cli\u003eJoist-to-ledger connections\u003c\/li\u003e\n\u003cli\u003eDecorative Outdoor Accents hardware projects\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eInstall the LUSPC joist hanger with the specified Simpson Strong-Tie Outdoor Accents connector screws. Header fasteners use \u003ca href=\"https:\/\/www.fastenersplus.com\/products\/simpson-strong-tie-9-x-1-1-2-outdoor-accents-sd-connector-screw-double-barrier-coating-black-qty-50\" target=\"_blank\" rel=\"noopener\"\u003eOutdoor Accents #9 x 1-1\/2\" connector screws\u003c\/a\u003e, while joist fasteners use \u003ca href=\"https:\/\/www.fastenersplus.com\/products\/simpson-strong-tie-sds9212dbb-9-x-2-1-2-outdoor-accents-sd-connector-screw-double-barrier-coating-black-qty-50\" target=\"_blank\" rel=\"noopener\"\u003eOutdoor Accents #9 x 2-1\/2\" connector screws\u003c\/a\u003e. Joist screws must be driven at an angle through the joist or truss into the header to achieve published loads. Always use all specified fasteners and follow Simpson Strong-Tie installation requirements for the selected hanger size.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCalifornia Residents: \u003ca href=\"\/pages\/prop-65\" style=\"color: black;\" target=\"_blank\"\u003eWARNING\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":46102587768968,"sku":"LUS26PC","price":2.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/8644\/4936\/files\/LUS26PC.01_acbbb5bf-36e4-45b4-aa82-c4194ec02d8f.jpg?v=1782845813"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/8644\/4936\/collections\/media_c9d130a5-da15-4fea-8261-2558ee053e72.jpg?v=1722880928","url":"https:\/\/www.fastenersplus.com\/collections\/lus-lu-u-light-duty-face-mount-joist-hangers.oembed","provider":"Fasteners Plus","version":"1.0","type":"link"}