{"title":"MBHU Masonry Beam Hangers","description":"\u003cp\u003eThe MBHU Masonry Beam Hanger is the face-mount equivalent of the\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"\/collections\/mbha-masonry-hangers\"\u003eMBHA Hanger\u003c\/a\u003e, which is a top-flange version. Use this non-welded, single-piece connector to secure beams and trusses to masonry using the included Titen HD® heavy-duty screw anchor and\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"\/collections\/simpson-sds-heavy-duty-connector-screws\"\u003eStrong-Drive® SDS Heavy-Duty Connector screws\u003c\/a\u003e. Made of strong 10-gauge steel and a durable G90 galvanized finish for corrosion protection, these masonry beam hangers are a reliable choice for your next masonry connection project.\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003eWe also have a large selection of\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"\/collections\/solid-sawn-joist-hangers\"\u003esolid-sawn joist hangers\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eand\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"\/collections\/scl-i-joist-hangers\"\u003estructural composite lumber hangers\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eavailable.\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cb\u003eNeed help deciding which masonry connector is right for your application?\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eWe carry a large selection of\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"\/collections\/masonry-connectors\"\u003eSimpson Strong-Tie Masonry Connectors\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eand other\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"\/collections\/simpson-connectors\"\u003eSimpson Connectors\u003c\/a\u003e. Contact our team of product specialists today at\u003cspan\u003e \u003c\/span\u003e\u003cb\u003e888-794-1590\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003ewith any product questions or for help placing an order.\u003c\/p\u003e","products":[{"product_id":"simpson-mbhu3-56-11-25kt-masonry-beam-hanger-w-screws","title":"Simpson MBHU3.56\/11.25KT Masonry Beam Hanger W\/Screws, Made to Order Non-Returnable","description":"\u003cp\u003eThe new MBHU beam hanger provides a face-mounted solution for connecting beams to masonry or concrete walls. A non-welded, one-piece connector, the MBHU is suitable for solid sawn and engineered wood beams as well as trusses. Installation is simplified because the Titen HD® heavy-duty screw anchor and Strong-Drive® SDS Heavy-Duty Connector screws are included with the hanger. Since the Titen HD anchor is installed after the wall is built, locating the anchor in the right spot is easier than with cast-in-place bolts.\u003c\/p\u003e\u003cbr\u003e      \u003cul\u003e\n\u003cli\u003eUse all specified fasteners (included).\u003c\/li\u003e \u003cli\u003eAttach hanger to a concrete or grouted CMU wall using Titen HD anchors. Note the following:\u003c\/li\u003e \u003cul\u003e\n\u003cli\u003eDrill holes using drill bits equal in diameter to the specified Titen HD anchor.\u003c\/li\u003e \u003cli\u003eHoles shall be drilled 1\/2\" deeper than the specified Titen HD length (i.e. 5 1\/2\" for a 5\" long Titen HD anchor)\u003c\/li\u003e \u003cli\u003eCaution: Oversized holes in the base material will reduce or eliminate the mechanical interlock of the threads with the base material and will reduce the anchor's load capacity.\u003c\/li\u003e \u003c\/ul\u003e \u003cli\u003eTiten HD is not recommended for exposed exterior applications.\u003c\/li\u003e \u003cli\u003eProvide moisture barrier between beam and wall per jurisdictional requirements.\u003c\/li\u003e \u003c\/ul\u003e   \u003cbr\u003e   \u003cp\u003e\u003cb\u003eNOTE: The correct fasteners installed in the correct position must be used to achieve published load values\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eCalifornia Residents: \u003ca href=\"\/prop-65\" style=\"color: black;\" target=\"_blank\"\u003eWARNING\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":34276889395336,"sku":"MBHU3.56\/11.25KT","price":197.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/8644\/4936\/products\/MBHU356.01_dac5c9fb-994c-42fc-a7da-f8b112f0b36b.jpg?v=1594750591"},{"product_id":"simpson-mbhu3-56-11-88kt-masonry-beam-hanger-w-screws","title":"Simpson MBHU3.56\/11.88KT Masonry Beam Hanger W\/Screws, Made to Order Non-Returnable","description":"\u003cp\u003eThe new MBHU beam hanger provides a face-mounted solution for connecting beams to masonry or concrete walls. A non-welded, one-piece connector, the MBHU is suitable for solid sawn and engineered wood beams as well as trusses. Installation is simplified because the Titen HD® heavy-duty screw anchor and Strong-Drive® SDS Heavy-Duty Connector screws are included with the hanger. Since the Titen HD anchor is installed after the wall is built, locating the anchor in the right spot is easier than with cast-in-place bolts.\u003c\/p\u003e\u003cbr\u003e      \u003cul\u003e\n\u003cli\u003eUse all specified fasteners (included).\u003c\/li\u003e \u003cli\u003eAttach hanger to a concrete or grouted CMU wall using Titen HD anchors. Note the following:\u003c\/li\u003e \u003cul\u003e\n\u003cli\u003eDrill holes using drill bits equal in diameter to the specified Titen HD anchor.\u003c\/li\u003e \u003cli\u003eHoles shall be drilled 1\/2\" deeper than the specified Titen HD length (i.e. 5 1\/2\" for a 5\" long Titen HD anchor)\u003c\/li\u003e \u003cli\u003eCaution: Oversized holes in the base material will reduce or eliminate the mechanical interlock of the threads with the base material and will reduce the anchor's load capacity.\u003c\/li\u003e \u003c\/ul\u003e \u003cli\u003eTiten HD is not recommended for exposed exterior applications.\u003c\/li\u003e \u003cli\u003eProvide moisture barrier between beam and wall per jurisdictional requirements.\u003c\/li\u003e \u003c\/ul\u003e   \u003cbr\u003e   \u003cp\u003e\u003cb\u003eNOTE: The correct fasteners installed in the correct position must be used to achieve published load values\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eCalifornia Residents: \u003ca href=\"\/prop-65\" style=\"color: black;\" target=\"_blank\"\u003eWARNING\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":34276890968200,"sku":"MBHU3.56\/11.88KT","price":202.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/8644\/4936\/products\/MBHU356.01_7d1d954f-38de-46fa-a141-b8e68c838910.jpg?v=1594750590"},{"product_id":"simpson-mbhu3-56-14kt-masonry-beam-hanger-w-screws","title":"Simpson MBHU3.56\/14KT Masonry Beam Hanger W\/Screws, Made to Order Non-Returnable","description":"\u003cp\u003eThe new MBHU beam hanger provides a face-mounted solution for connecting beams to masonry or concrete walls. A non-welded, one-piece connector, the MBHU is suitable for solid sawn and engineered wood beams as well as trusses. Installation is simplified because the Titen HD® heavy-duty screw anchor and Strong-Drive® SDS Heavy-Duty Connector screws are included with the hanger. Since the Titen HD anchor is installed after the wall is built, locating the anchor in the right spot is easier than with cast-in-place bolts.\u003c\/p\u003e\u003cbr\u003e      \u003cul\u003e\n\u003cli\u003eUse all specified fasteners (included).\u003c\/li\u003e \u003cli\u003eAttach hanger to a concrete or grouted CMU wall using Titen HD anchors. Note the following:\u003c\/li\u003e \u003cul\u003e\n\u003cli\u003eDrill holes using drill bits equal in diameter to the specified Titen HD anchor.\u003c\/li\u003e \u003cli\u003eHoles shall be drilled 1\/2\" deeper than the specified Titen HD length (i.e. 5 1\/2\" for a 5\" long Titen HD anchor)\u003c\/li\u003e \u003cli\u003eCaution: Oversized holes in the base material will reduce or eliminate the mechanical interlock of the threads with the base material and will reduce the anchor's load capacity.\u003c\/li\u003e \u003c\/ul\u003e \u003cli\u003eTiten HD is not recommended for exposed exterior applications.\u003c\/li\u003e \u003cli\u003eProvide moisture barrier between beam and wall per jurisdictional requirements.\u003c\/li\u003e \u003c\/ul\u003e   \u003cbr\u003e   \u003cp\u003e\u003cb\u003eNOTE: The correct fasteners installed in the correct position must be used to achieve published load values\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eCalifornia Residents: \u003ca href=\"\/prop-65\" style=\"color: black;\" target=\"_blank\"\u003eWARNING\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":34276894408840,"sku":"MBHU3.56\/14KT","price":219.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/8644\/4936\/products\/MBHU356.01_4d8465c6-0072-4d06-b447-58e913b2426c.jpg?v=1594750589"},{"product_id":"simpson-mbhu3-56-16kt-masonry-beam-hanger-w-screws","title":"Simpson MBHU3.56\/16KT Masonry Beam Hanger W\/Screws, Made to Order Non-Returnable","description":"\u003cp\u003eThe new MBHU beam hanger provides a face-mounted solution for connecting beams to masonry or concrete walls. A non-welded, one-piece connector, the MBHU is suitable for solid sawn and engineered wood beams as well as trusses. Installation is simplified because the Titen HD® heavy-duty screw anchor and Strong-Drive® SDS Heavy-Duty Connector screws are included with the hanger. Since the Titen HD anchor is installed after the wall is built, locating the anchor in the right spot is easier than with cast-in-place bolts.\u003c\/p\u003e\u003cbr\u003e      \u003cul\u003e\n\u003cli\u003eUse all specified fasteners (included).\u003c\/li\u003e \u003cli\u003eAttach hanger to a concrete or grouted CMU wall using Titen HD anchors. Note the following:\u003c\/li\u003e \u003cul\u003e\n\u003cli\u003eDrill holes using drill bits equal in diameter to the specified Titen HD anchor.\u003c\/li\u003e \u003cli\u003eHoles shall be drilled 1\/2\" deeper than the specified Titen HD length (i.e. 5 1\/2\" for a 5\" long Titen HD anchor)\u003c\/li\u003e \u003cli\u003eCaution: Oversized holes in the base material will reduce or eliminate the mechanical interlock of the threads with the base material and will reduce the anchor's load capacity.\u003c\/li\u003e \u003c\/ul\u003e \u003cli\u003eTiten HD is not recommended for exposed exterior applications.\u003c\/li\u003e \u003cli\u003eProvide moisture barrier between beam and wall per jurisdictional requirements.\u003c\/li\u003e \u003c\/ul\u003e   \u003cbr\u003e   \u003cp\u003e\u003cb\u003eNOTE: The correct fasteners installed in the correct position must be used to achieve published load values\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eCalifornia Residents: \u003ca href=\"\/prop-65\" style=\"color: black;\" target=\"_blank\"\u003eWARNING\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":34276896145544,"sku":"MBHU3.56\/16KT","price":234.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/8644\/4936\/products\/MBHU356.01_4ca31937-c312-432c-93c4-872444c3b1a3.jpg?v=1594750587"},{"product_id":"simpson-mbhu3-56-18kt-masonry-beam-hanger-w-screws","title":"Simpson MBHU3.56\/18KT Masonry Beam Hanger W\/Screws, Made to Order Non-Returnable","description":"\u003cp\u003eThe new MBHU beam hanger provides a face-mounted solution for connecting beams to masonry or concrete walls. A non-welded, one-piece connector, the MBHU is suitable for solid sawn and engineered wood beams as well as trusses. Installation is simplified because the Titen HD® heavy-duty screw anchor and Strong-Drive® SDS Heavy-Duty Connector screws are included with the hanger. Since the Titen HD anchor is installed after the wall is built, locating the anchor in the right spot is easier than with cast-in-place bolts.\u003c\/p\u003e\u003cbr\u003e      \u003cul\u003e\n\u003cli\u003eUse all specified fasteners (included).\u003c\/li\u003e \u003cli\u003eAttach hanger to a concrete or grouted CMU wall using Titen HD anchors. Note the following:\u003c\/li\u003e \u003cul\u003e\n\u003cli\u003eDrill holes using drill bits equal in diameter to the specified Titen HD anchor.\u003c\/li\u003e \u003cli\u003eHoles shall be drilled 1\/2\" deeper than the specified Titen HD length (i.e. 5 1\/2\" for a 5\" long Titen HD anchor)\u003c\/li\u003e \u003cli\u003eCaution: Oversized holes in the base material will reduce or eliminate the mechanical interlock of the threads with the base material and will reduce the anchor's load capacity.\u003c\/li\u003e \u003c\/ul\u003e \u003cli\u003eTiten HD is not recommended for exposed exterior applications.\u003c\/li\u003e \u003cli\u003eProvide moisture barrier between beam and wall per jurisdictional requirements.\u003c\/li\u003e \u003c\/ul\u003e   \u003cbr\u003e   \u003cp\u003e\u003cb\u003eNOTE: The correct fasteners installed in the correct position must be used to achieve published load values\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eCalifornia Residents: \u003ca href=\"\/prop-65\" style=\"color: black;\" target=\"_blank\"\u003eWARNING\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":34276899782792,"sku":"MBHU3.56\/18KT","price":244.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/8644\/4936\/products\/MBHU356.01_89b11c80-a3c5-4c37-8112-12316b94cf78.jpg?v=1594750586"},{"product_id":"simpson-mbhu3-56-9-25kt-masonry-beam-hanger-w-screws","title":"Simpson MBHU3.56\/9.25KT Masonry Beam Hanger W\/Screws, Made to Order Non-Returnable","description":"\u003cp\u003eThe new MBHU beam hanger provides a face-mounted solution for connecting beams to masonry or concrete walls. A non-welded, one-piece connector, the MBHU is suitable for solid sawn and engineered wood beams as well as trusses. Installation is simplified because the Titen HD® heavy-duty screw anchor and Strong-Drive® SDS Heavy-Duty Connector screws are included with the hanger. Since the Titen HD anchor is installed after the wall is built, locating the anchor in the right spot is easier than with cast-in-place bolts.\u003c\/p\u003e\u003cbr\u003e      \u003cul\u003e\n\u003cli\u003eUse all specified fasteners (included).\u003c\/li\u003e \u003cli\u003eAttach hanger to a concrete or grouted CMU wall using Titen HD anchors. Note the following:\u003c\/li\u003e \u003cul\u003e\n\u003cli\u003eDrill holes using drill bits equal in diameter to the specified Titen HD anchor.\u003c\/li\u003e \u003cli\u003eHoles shall be drilled 1\/2\" deeper than the specified Titen HD length (i.e. 5 1\/2\" for a 5\" long Titen HD anchor)\u003c\/li\u003e \u003cli\u003eCaution: Oversized holes in the base material will reduce or eliminate the mechanical interlock of the threads with the base material and will reduce the anchor's load capacity.\u003c\/li\u003e \u003c\/ul\u003e \u003cli\u003eTiten HD is not recommended for exposed exterior applications.\u003c\/li\u003e \u003cli\u003eProvide moisture barrier between beam and wall per jurisdictional requirements.\u003c\/li\u003e \u003c\/ul\u003e   \u003cbr\u003e   \u003cp\u003e\u003cb\u003eNOTE: The correct fasteners installed in the correct position must be used to achieve published load values\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eCalifornia Residents: \u003ca href=\"\/prop-65\" style=\"color: black;\" target=\"_blank\"\u003eWARNING\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":34276901027976,"sku":"MBHU3.56\/9.25KT","price":194.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/8644\/4936\/products\/MBHU356.01.jpg?v=1594750585"},{"product_id":"simpson-mbhu5-50-11-25kt-masonry-beam-hanger-w-screws","title":"Simpson MBHU5.50\/11.25KT Masonry Beam Hanger W\/Screws","description":"\u003cp\u003eThe new MBHU beam hanger provides a face-mounted solution for connecting beams to masonry or concrete walls. A non-welded, one-piece connector, the MBHU is suitable for solid sawn and engineered wood beams as well as trusses. Installation is simplified because the Titen HD® heavy-duty screw anchor and Strong-Drive® SDS Heavy-Duty Connector screws are included with the hanger. Since the Titen HD anchor is installed after the wall is built, locating the anchor in the right spot is easier than with cast-in-place bolts.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUse all specified fasteners (included).\u003c\/li\u003e\n\u003cli\u003eAttach hanger to a concrete or grouted CMU wall using Titen HD anchors. Note the following:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eDrill holes using drill bits equal in diameter to the specified Titen HD anchor.\u003c\/li\u003e\n\u003cli\u003eHoles shall be drilled 1\/2\" deeper than the specified Titen HD length (i.e. 5 1\/2\" for a 5\" long Titen HD anchor)\u003c\/li\u003e\n\u003cli\u003eCaution: Oversized holes in the base material will reduce or eliminate the mechanical interlock of the threads with the base material and will reduce the anchor's load capacity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eTiten HD is not recommended for exposed exterior applications.\u003c\/li\u003e\n\u003cli\u003eProvide moisture barrier between beam and wall per jurisdictional requirements.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eNOTE: The correct fasteners installed in the correct position must be used to achieve published load values\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCalifornia Residents: \u003ca href=\"\/prop-65\" style=\"color: black;\" target=\"_blank\"\u003eWARNING\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":34276902633608,"sku":"MBHU5.50\/11.25KT","price":224.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/8644\/4936\/products\/MBHU550.01_51376bf6-5d8b-42da-acea-8b86886447fc.jpg?v=1594750584"},{"product_id":"simpson-mbhu5-50-11-88kt-masonry-beam-hanger-w-screws","title":"Simpson MBHU5.50\/11.88KT Masonry Beam Hanger W\/Screws, Made to Order Non-Returnable","description":"\u003cp\u003eThe new MBHU beam hanger provides a face-mounted solution for connecting beams to masonry or concrete walls. A non-welded, one-piece connector, the MBHU is suitable for solid sawn and engineered wood beams as well as trusses. Installation is simplified because the Titen HD® heavy-duty screw anchor and Strong-Drive® SDS Heavy-Duty Connector screws are included with the hanger. Since the Titen HD anchor is installed after the wall is built, locating the anchor in the right spot is easier than with cast-in-place bolts.\u003c\/p\u003e\u003cbr\u003e      \u003cul\u003e\n\u003cli\u003eUse all specified fasteners (included).\u003c\/li\u003e \u003cli\u003eAttach hanger to a concrete or grouted CMU wall using Titen HD anchors. Note the following:\u003c\/li\u003e \u003cul\u003e\n\u003cli\u003eDrill holes using drill bits equal in diameter to the specified Titen HD anchor.\u003c\/li\u003e \u003cli\u003eHoles shall be drilled 1\/2\" deeper than the specified Titen HD length (i.e. 5 1\/2\" for a 5\" long Titen HD anchor)\u003c\/li\u003e \u003cli\u003eCaution: Oversized holes in the base material will reduce or eliminate the mechanical interlock of the threads with the base material and will reduce the anchor's load capacity.\u003c\/li\u003e \u003c\/ul\u003e \u003cli\u003eTiten HD is not recommended for exposed exterior applications.\u003c\/li\u003e \u003cli\u003eProvide moisture barrier between beam and wall per jurisdictional requirements.\u003c\/li\u003e \u003c\/ul\u003e   \u003cbr\u003e   \u003cp\u003e\u003cb\u003eNOTE: The correct fasteners installed in the correct position must be used to achieve published load values\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eCalifornia Residents: \u003ca href=\"\/prop-65\" style=\"color: black;\" target=\"_blank\"\u003eWARNING\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":34276903878792,"sku":"MBHU5.50\/11.88KT","price":227.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/8644\/4936\/products\/MBHU550.01_2c6c8bd9-150c-42fc-a5f8-b84a851d47e7.jpg?v=1594750583"},{"product_id":"simpson-mbhu5-50-14kt-masonry-beam-hanger-w-screws","title":"Simpson MBHU5.50\/14KT Masonry Beam Hanger W\/Screws, Made to Order Non-Returnable","description":"\u003cp\u003eThe new MBHU beam hanger provides a face-mounted solution for connecting beams to masonry or concrete walls. A non-welded, one-piece connector, the MBHU is suitable for solid sawn and engineered wood beams as well as trusses. Installation is simplified because the Titen HD® heavy-duty screw anchor and Strong-Drive® SDS Heavy-Duty Connector screws are included with the hanger. Since the Titen HD anchor is installed after the wall is built, locating the anchor in the right spot is easier than with cast-in-place bolts.\u003c\/p\u003e\u003cbr\u003e      \u003cul\u003e\n\u003cli\u003eUse all specified fasteners (included).\u003c\/li\u003e \u003cli\u003eAttach hanger to a concrete or grouted CMU wall using Titen HD anchors. Note the following:\u003c\/li\u003e \u003cul\u003e\n\u003cli\u003eDrill holes using drill bits equal in diameter to the specified Titen HD anchor.\u003c\/li\u003e \u003cli\u003eHoles shall be drilled 1\/2\" deeper than the specified Titen HD length (i.e. 5 1\/2\" for a 5\" long Titen HD anchor)\u003c\/li\u003e \u003cli\u003eCaution: Oversized holes in the base material will reduce or eliminate the mechanical interlock of the threads with the base material and will reduce the anchor's load capacity.\u003c\/li\u003e \u003c\/ul\u003e \u003cli\u003eTiten HD is not recommended for exposed exterior applications.\u003c\/li\u003e \u003cli\u003eProvide moisture barrier between beam and wall per jurisdictional requirements.\u003c\/li\u003e \u003c\/ul\u003e   \u003cbr\u003e   \u003cp\u003e\u003cb\u003eNOTE: The correct fasteners installed in the correct position must be used to achieve published load values\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eCalifornia Residents: \u003ca href=\"\/prop-65\" style=\"color: black;\" target=\"_blank\"\u003eWARNING\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":34276907057288,"sku":"MBHU5.50\/14KT","price":247.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/8644\/4936\/products\/MBHU550.01_8e4c7ee8-6938-435b-99a8-cbdd0cc49c01.jpg?v=1594750581"},{"product_id":"simpson-mbhu5-50-16kt-masonry-beam-hanger-w-screws","title":"Simpson MBHU5.50\/16KT Masonry Beam Hanger W\/Screws, Made to Order Non-Returnable","description":"\u003cp\u003eThe new MBHU beam hanger provides a face-mounted solution for connecting beams to masonry or concrete walls. A non-welded, one-piece connector, the MBHU is suitable for solid sawn and engineered wood beams as well as trusses. Installation is simplified because the Titen HD® heavy-duty screw anchor and Strong-Drive® SDS Heavy-Duty Connector screws are included with the hanger. Since the Titen HD anchor is installed after the wall is built, locating the anchor in the right spot is easier than with cast-in-place bolts.\u003c\/p\u003e\u003cbr\u003e      \u003cul\u003e\n\u003cli\u003eUse all specified fasteners (included).\u003c\/li\u003e \u003cli\u003eAttach hanger to a concrete or grouted CMU wall using Titen HD anchors. Note the following:\u003c\/li\u003e \u003cul\u003e\n\u003cli\u003eDrill holes using drill bits equal in diameter to the specified Titen HD anchor.\u003c\/li\u003e \u003cli\u003eHoles shall be drilled 1\/2\" deeper than the specified Titen HD length (i.e. 5 1\/2\" for a 5\" long Titen HD anchor)\u003c\/li\u003e \u003cli\u003eCaution: Oversized holes in the base material will reduce or eliminate the mechanical interlock of the threads with the base material and will reduce the anchor's load capacity.\u003c\/li\u003e \u003c\/ul\u003e \u003cli\u003eTiten HD is not recommended for exposed exterior applications.\u003c\/li\u003e \u003cli\u003eProvide moisture barrier between beam and wall per jurisdictional requirements.\u003c\/li\u003e \u003c\/ul\u003e   \u003cbr\u003e   \u003cp\u003e\u003cb\u003eNOTE: The correct fasteners installed in the correct position must be used to achieve published load values\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eCalifornia Residents: \u003ca href=\"\/prop-65\" style=\"color: black;\" target=\"_blank\"\u003eWARNING\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":34276909547656,"sku":"MBHU5.50\/16KT","price":257.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/8644\/4936\/products\/MBHU550.01_6f8b9e3a-e4dc-4e72-b9ee-6e702f365339.jpg?v=1594750580"},{"product_id":"simpson-mbhu5-50-18kt-masonry-beam-hanger-w-screws","title":"Simpson MBHU5.50\/18KT Masonry Beam Hanger W\/Screws, Made to Order Non-Returnable","description":"\u003cp\u003eThe new MBHU beam hanger provides a face-mounted solution for connecting beams to masonry or concrete walls. A non-welded, one-piece connector, the MBHU is suitable for solid sawn and engineered wood beams as well as trusses. Installation is simplified because the Titen HD® heavy-duty screw anchor and Strong-Drive® SDS Heavy-Duty Connector screws are included with the hanger. Since the Titen HD anchor is installed after the wall is built, locating the anchor in the right spot is easier than with cast-in-place bolts.\u003c\/p\u003e\u003cbr\u003e      \u003cul\u003e\n\u003cli\u003eUse all specified fasteners (included).\u003c\/li\u003e \u003cli\u003eAttach hanger to a concrete or grouted CMU wall using Titen HD anchors. Note the following:\u003c\/li\u003e \u003cul\u003e\n\u003cli\u003eDrill holes using drill bits equal in diameter to the specified Titen HD anchor.\u003c\/li\u003e \u003cli\u003eHoles shall be drilled 1\/2\" deeper than the specified Titen HD length (i.e. 5 1\/2\" for a 5\" long Titen HD anchor)\u003c\/li\u003e \u003cli\u003eCaution: Oversized holes in the base material will reduce or eliminate the mechanical interlock of the threads with the base material and will reduce the anchor's load capacity.\u003c\/li\u003e \u003c\/ul\u003e \u003cli\u003eTiten HD is not recommended for exposed exterior applications.\u003c\/li\u003e \u003cli\u003eProvide moisture barrier between beam and wall per jurisdictional requirements.\u003c\/li\u003e \u003c\/ul\u003e   \u003cbr\u003e   \u003cp\u003e\u003cb\u003eNOTE: The correct fasteners installed in the correct position must be used to achieve published load values\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eCalifornia Residents: \u003ca href=\"\/prop-65\" style=\"color: black;\" target=\"_blank\"\u003eWARNING\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":34276911382664,"sku":"MBHU5.50\/18KT","price":272.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/8644\/4936\/products\/MBHU550.01_f9a79de9-d897-44e3-90c2-fd8846b969a7.jpg?v=1594750579"},{"product_id":"simpson-mbhu5-50-9-25kt-masonry-beam-hanger-w-screws","title":"Simpson MBHU5.50\/9.25KT Masonry Beam Hanger W\/Screws, Made to Order Non-Returnable","description":"\u003cp\u003eThe new MBHU beam hanger provides a face-mounted solution for connecting beams to masonry or concrete walls. A non-welded, one-piece connector, the MBHU is suitable for solid sawn and engineered wood beams as well as trusses. Installation is simplified because the Titen HD® heavy-duty screw anchor and Strong-Drive® SDS Heavy-Duty Connector screws are included with the hanger. Since the Titen HD anchor is installed after the wall is built, locating the anchor in the right spot is easier than with cast-in-place bolts.\u003c\/p\u003e\u003cbr\u003e      \u003cul\u003e\n\u003cli\u003eUse all specified fasteners (included).\u003c\/li\u003e \u003cli\u003eAttach hanger to a concrete or grouted CMU wall using Titen HD anchors. Note the following:\u003c\/li\u003e \u003cul\u003e\n\u003cli\u003eDrill holes using drill bits equal in diameter to the specified Titen HD anchor.\u003c\/li\u003e \u003cli\u003eHoles shall be drilled 1\/2\" deeper than the specified Titen HD length (i.e. 5 1\/2\" for a 5\" long Titen HD anchor)\u003c\/li\u003e \u003cli\u003eCaution: Oversized holes in the base material will reduce or eliminate the mechanical interlock of the threads with the base material and will reduce the anchor's load capacity.\u003c\/li\u003e \u003c\/ul\u003e \u003cli\u003eTiten HD is not recommended for exposed exterior applications.\u003c\/li\u003e \u003cli\u003eProvide moisture barrier between beam and wall per jurisdictional requirements.\u003c\/li\u003e \u003c\/ul\u003e   \u003cbr\u003e   \u003cp\u003e\u003cb\u003eNOTE: The correct fasteners installed in the correct position must be used to achieve published load values\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eCalifornia Residents: \u003ca href=\"\/prop-65\" style=\"color: black;\" target=\"_blank\"\u003eWARNING\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":34276912496776,"sku":"MBHU5.50\/9.25KT","price":214.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/8644\/4936\/products\/MBHU550.01.jpg?v=1594750577"},{"product_id":"simpson-mbhu3-56-11-25sskt-masonry-beam-face-mount-hanger-stainless-steel","title":"Simpson MBHU3.56\/11.25SSKT Masonry Beam Hanger W\/Screws - Stainless Steel","description":"\u003cp\u003eFor face-mounted connections between beams and masonry or concrete walls, there is the Simpson MBHU Masonry Beam Face-Mount Hanger. The MBHU is a one-piece, non-welded connector that may be used with both trusses and solid engineered wood beams. Because the Strong-Drive® SDS Heavy-Duty Connector screws and Titen HD® heavy-duty screw anchor are provided with the hanger, installation is made simpler. It is simpler to locate the Titen HD anchor in the proper location than it would be with cast-in-place bolts because it is installed after the wall is constructed.\u003c\/p\u003e\n\u003cp\u003eThe MBHU hangers are now offered in Type 316 stainless steel, which offers a High\/Severe level of corrosion resistance, and are delivered in kits with the Type 316 stainless steel fasteners paired with the appropriate anchors.\u003c\/p\u003e\n\u003cstyle\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cstrong\u003eUse all specified fasteners. Verify that the header can take the fasteners specified in the table.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cstyle\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cb\u003eCalifornia Residents: \u003ca href=\"\/pages\/prop-65\" style=\"color: black;\" target=\"_blank\"\u003eWARNING\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":41123913498760,"sku":"MBHU3.56\/11.25SSKT","price":979.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/8644\/4936\/products\/MBHU3.56-11.25KT.jpg?v=1683053435"},{"product_id":"simpson-mbhu3-56-11-88sskt-masonry-beam-face-mount-hanger-stainless-steel","title":"Simpson MBHU3.56\/11.88SSKT Masonry Beam Hanger W\/Screws - Stainless Steel","description":"\u003cp\u003eFor face-mounted connections between beams and masonry or concrete walls, there is the Simpson MBHU Masonry Beam Face-Mount Hanger. The MBHU is a one-piece, non-welded connector that may be used with both trusses and solid engineered wood beams. Because the Strong-Drive® SDS Heavy-Duty Connector screws and Titen HD® heavy-duty screw anchor are provided with the hanger, installation is made simpler. It is simpler to locate the Titen HD anchor in the proper location than it would be with cast-in-place bolts because it is installed after the wall is constructed.\u003c\/p\u003e\n\u003cp\u003eThe MBHU hangers are now offered in Type 316 stainless steel, which offers a High\/Severe level of corrosion resistance, and are delivered in kits with the Type 316 stainless steel fasteners paired with the appropriate anchors.\u003c\/p\u003e\n\u003cstyle\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cstrong\u003eUse all specified fasteners. Verify that the header can take the fasteners specified in the table.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cstyle\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cb\u003eCalifornia Residents: \u003ca href=\"\/pages\/prop-65\" style=\"color: black;\" target=\"_blank\"\u003eWARNING\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":41123913531528,"sku":"MBHU3.56\/11.88SSKT","price":1045.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/8644\/4936\/products\/MBHU3.56-11.25KT_572107b6-38b8-4301-974f-cf7142e016cf.jpg?v=1683053441"},{"product_id":"simpson-mbhu3-56-14sskt-masonry-beam-face-mount-hanger-stainless-steel","title":"Simpson MBHU3.56\/14SSKT Masonry Beam Hanger W\/Screws - Stainless Steel","description":"\u003cp\u003eFor face-mounted connections between beams and masonry or concrete walls, there is the Simpson MBHU Masonry Beam Face-Mount Hanger. The MBHU is a one-piece, non-welded connector that may be used with both trusses and solid engineered wood beams. Because the Strong-Drive® SDS Heavy-Duty Connector screws and Titen HD® heavy-duty screw anchor are provided with the hanger, installation is made simpler. It is simpler to locate the Titen HD anchor in the proper location than it would be with cast-in-place bolts because it is installed after the wall is constructed.\u003c\/p\u003e\n\u003cp\u003eThe MBHU hangers are now offered in Type 316 stainless steel, which offers a High\/Severe level of corrosion resistance, and are delivered in kits with the Type 316 stainless steel fasteners paired with the appropriate anchors.\u003c\/p\u003e\n\u003cstyle\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cstrong\u003eUse all specified fasteners. Verify that the header can take the fasteners specified in the table.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cstyle\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cb\u003eCalifornia Residents: \u003ca href=\"\/pages\/prop-65\" style=\"color: black;\" target=\"_blank\"\u003eWARNING\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":41123913597064,"sku":"MBHU3.56\/14SSKT","price":1095.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/8644\/4936\/products\/MBHU3.56-11.25KT_4fc505dd-f472-478c-8142-0ccd139550bf.jpg?v=1683053446"},{"product_id":"simpson-mbhu3-56-16sskt-masonry-beam-face-mount-hanger-stainless-steel","title":"Simpson MBHU3.56\/16SSKT Masonry Beam Hanger W\/Screws - Stainless Steel","description":"\u003cp\u003eFor face-mounted connections between beams and masonry or concrete walls, there is the Simpson MBHU Masonry Beam Face-Mount Hanger. The MBHU is a one-piece, non-welded connector that may be used with both trusses and solid engineered wood beams. Because the Strong-Drive® SDS Heavy-Duty Connector screws and Titen HD® heavy-duty screw anchor are provided with the hanger, installation is made simpler. It is simpler to locate the Titen HD anchor in the proper location than it would be with cast-in-place bolts because it is installed after the wall is constructed.\u003c\/p\u003e\n\u003cp\u003eThe MBHU hangers are now offered in Type 316 stainless steel, which offers a High\/Severe level of corrosion resistance, and are delivered in kits with the Type 316 stainless steel fasteners paired with the appropriate anchors.\u003c\/p\u003e\n\u003cstyle\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cstrong\u003eUse all specified fasteners. Verify that the header can take the fasteners specified in the table.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cstyle\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cb\u003eCalifornia Residents: \u003ca href=\"\/pages\/prop-65\" style=\"color: black;\" target=\"_blank\"\u003eWARNING\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":41123913629832,"sku":"MBHU3.56\/16SSKT","price":1175.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/8644\/4936\/products\/MBHU3.56-18KT.jpg?v=1683053450"},{"product_id":"simpson-mbhu3-56-18sskt-masonry-beam-face-mount-hanger-stainless-steel","title":"Simpson MBHU3.56\/18SSKT Masonry Beam Face-Mount Hanger - Stainless Steel","description":"\u003cp\u003eFor face-mounted connections between beams and masonry or concrete walls, there is the Simpson MBHU Masonry Beam Face-Mount Hanger. The MBHU is a one-piece, non-welded connector that may be used with both trusses and solid engineered wood beams. Because the Strong-Drive® SDS Heavy-Duty Connector screws and Titen HD® heavy-duty screw anchor are provided with the hanger, installation is made simpler. It is simpler to locate the Titen HD anchor in the proper location than it would be with cast-in-place bolts because it is installed after the wall is constructed.\u003c\/p\u003e\n\u003cp\u003eThe MBHU hangers are now offered in Type 316 stainless steel, which offers a High\/Severe level of corrosion resistance, and are delivered in kits with the Type 316 stainless steel fasteners paired with the appropriate anchors.\u003c\/p\u003e\n\u003cstyle\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cstrong\u003eUse all specified fasteners. Verify that the header can take the fasteners specified in the table.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cstyle\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cb\u003eCalifornia Residents: \u003ca href=\"\/pages\/prop-65\" style=\"color: black;\" target=\"_blank\"\u003eWARNING\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":41123913662600,"sku":"MBHU3.56\/18SSKT","price":1145.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/8644\/4936\/products\/MBHU3.56-18KT_20909a1c-e080-4c7a-8456-fa58b2533d65.jpg?v=1683053455"},{"product_id":"simpson-mbhu3-56-9-25sskt-masonry-beam-face-mount-hanger-stainless-steel","title":"Simpson MBHU3.56\/9.25SSKT Masonry Beam Hanger W\/Screws - Stainless Steel","description":"\u003cp\u003eFor face-mounted connections between beams and masonry or concrete walls, there is the Simpson MBHU Masonry Beam Face-Mount Hanger. The MBHU is a one-piece, non-welded connector that may be used with both trusses and solid engineered wood beams. Because the Strong-Drive® SDS Heavy-Duty Connector screws and Titen HD® heavy-duty screw anchor are provided with the hanger, installation is made simpler. It is simpler to locate the Titen HD anchor in the proper location than it would be with cast-in-place bolts because it is installed after the wall is constructed.\u003c\/p\u003e\n\u003cp\u003eThe MBHU hangers are now offered in Type 316 stainless steel, which offers a High\/Severe level of corrosion resistance, and are delivered in kits with the Type 316 stainless steel fasteners paired with the appropriate anchors.\u003c\/p\u003e\n\u003cstyle\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cstrong\u003eUse all specified fasteners. Verify that the header can take the fasteners specified in the table.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cstyle\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cb\u003eCalifornia Residents: \u003ca href=\"\/pages\/prop-65\" style=\"color: black;\" target=\"_blank\"\u003eWARNING\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":41123931062408,"sku":"MBHU3.56\/9.25SSKT","price":899.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/8644\/4936\/products\/MBHU3.56-9.25KT.jpg?v=1683053460"},{"product_id":"simpson-mbhu5-50-11-25sskt-masonry-beam-face-mount-hanger-stainless-steel","title":"Simpson MBHU5.50\/11.25SSKT Masonry Beam Hanger W\/Screws - Stainless Steel","description":"\u003cp\u003eFor face-mounted connections between beams and masonry or concrete walls, there is the Simpson MBHU Masonry Beam Face-Mount Hanger. The MBHU is a one-piece, non-welded connector that may be used with both trusses and solid engineered wood beams. Because the Strong-Drive® SDS Heavy-Duty Connector screws and Titen HD® heavy-duty screw anchor are provided with the hanger, installation is made simpler. It is simpler to locate the Titen HD anchor in the proper location than it would be with cast-in-place bolts because it is installed after the wall is constructed.\u003c\/p\u003e\n\u003cp\u003eThe MBHU hangers are now offered in Type 316 stainless steel, which offers a High\/Severe level of corrosion resistance, and are delivered in kits with the Type 316 stainless steel fasteners paired with the appropriate anchors.\u003c\/p\u003e\n\u003cstyle\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cstrong\u003eUse all specified fasteners. Verify that the header can take the fasteners specified in the table.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cstyle\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cb\u003eCalifornia Residents: \u003ca href=\"\/pages\/prop-65\" style=\"color: black;\" target=\"_blank\"\u003eWARNING\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":41123931095176,"sku":"MBHU5.50\/11.25SSKT","price":1095.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/8644\/4936\/products\/MBHU5.50-11.25KT.jpg?v=1683053465"},{"product_id":"simpson-mbhu5-50-14sskt-masonry-beam-face-mount-hanger-stainless-steel","title":"Simpson MBHU5.50\/14SSKT Masonry Beam Hanger W\/Screws - Stainless Steel","description":"\u003cp\u003eFor face-mounted connections between beams and masonry or concrete walls, there is the Simpson MBHU Masonry Beam Face-Mount Hanger. The MBHU is a one-piece, non-welded connector that may be used with both trusses and solid engineered wood beams. Because the Strong-Drive® SDS Heavy-Duty Connector screws and Titen HD® heavy-duty screw anchor are provided with the hanger, installation is made simpler. It is simpler to locate the Titen HD anchor in the proper location than it would be with cast-in-place bolts because it is installed after the wall is constructed.\u003c\/p\u003e\n\u003cp\u003eThe MBHU hangers are now offered in Type 316 stainless steel, which offers a High\/Severe level of corrosion resistance, and are delivered in kits with the Type 316 stainless steel fasteners paired with the appropriate anchors.\u003c\/p\u003e\n\u003cstyle\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cstrong\u003eUse all specified fasteners. Verify that the header can take the fasteners specified in the table.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cstyle\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cb\u003eCalifornia Residents: \u003ca href=\"\/pages\/prop-65\" style=\"color: black;\" target=\"_blank\"\u003eWARNING\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":41123931127944,"sku":"MBHU5.50\/14SSKT","price":1225.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/8644\/4936\/products\/MBHU5.50-11.25KT_8e7eec49-87fc-4f9e-9384-7175852d2551.jpg?v=1683053474"},{"product_id":"simpson-mbhu5-50-16sskt-masonry-beam-face-mount-hanger-stainless-steel","title":"Simpson MBHU5.50\/16SSKT Masonry Beam Hanger W\/Screws - Stainless Steel","description":"\u003cp\u003eFor face-mounted connections between beams and masonry or concrete walls, there is the Simpson MBHU Masonry Beam Face-Mount Hanger. The MBHU is a one-piece, non-welded connector that may be used with both trusses and solid engineered wood beams. Because the Strong-Drive® SDS Heavy-Duty Connector screws and Titen HD® heavy-duty screw anchor are provided with the hanger, installation is made simpler. It is simpler to locate the Titen HD anchor in the proper location than it would be with cast-in-place bolts because it is installed after the wall is constructed.\u003c\/p\u003e\n\u003cp\u003eThe MBHU hangers are now offered in Type 316 stainless steel, which offers a High\/Severe level of corrosion resistance, and are delivered in kits with the Type 316 stainless steel fasteners paired with the appropriate anchors.\u003c\/p\u003e\n\u003cstyle\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cstrong\u003eUse all specified fasteners. Verify that the header can take the fasteners specified in the table.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cstyle\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cb\u003eCalifornia Residents: \u003ca href=\"\/pages\/prop-65\" style=\"color: black;\" target=\"_blank\"\u003eWARNING\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":41123931160712,"sku":"MBHU5.50\/16SSKT","price":1275.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/8644\/4936\/products\/MBHU5.50-11.25KT_2440b717-05ad-402c-b488-d802cb821edf.jpg?v=1683053478"},{"product_id":"simpson-mbhu5-50-9-25sskt-masonry-beam-face-mount-hanger-stainless-steel","title":"Simpson MBHU5.50\/9.25SSKT Masonry Beam Hanger W\/Screws - Stainless Steel","description":"\u003cp\u003eFor face-mounted connections between beams and masonry or concrete walls, there is the Simpson MBHU Masonry Beam Face-Mount Hanger. The MBHU is a one-piece, non-welded connector that may be used with both trusses and solid engineered wood beams. Because the Strong-Drive® SDS Heavy-Duty Connector screws and Titen HD® heavy-duty screw anchor are provided with the hanger, installation is made simpler. It is simpler to locate the Titen HD anchor in the proper location than it would be with cast-in-place bolts because it is installed after the wall is constructed.\u003c\/p\u003e\n\u003cp\u003eThe MBHU hangers are now offered in Type 316 stainless steel, which offers a High\/Severe level of corrosion resistance, and are delivered in kits with the Type 316 stainless steel fasteners paired with the appropriate anchors.\u003c\/p\u003e\n\u003cstyle\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cstrong\u003eUse all specified fasteners. Verify that the header can take the fasteners specified in the table.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cstyle\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cb\u003eCalifornia Residents: \u003ca href=\"\/pages\/prop-65\" style=\"color: black;\" target=\"_blank\"\u003eWARNING\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":41123931193480,"sku":"MBHU5.50\/9.25SSKT","price":1025.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/8644\/4936\/products\/MBHU5.50-11.25KT_4e0dc674-75d6-47a4-9188-7a917dbb68dc.jpg?v=1683053487"},{"product_id":"simpson-mbhu5-50-11-88sskt-masonry-beam-face-mount-hanger-stainless-steel","title":"Simpson MBHU5.50\/11.88SSKT Masonry Beam Hanger W\/Screws - Stainless Steel","description":"\u003cp\u003eFor face-mounted connections between beams and masonry or concrete walls, there is the Simpson MBHU Masonry Beam Face-Mount Hanger. The MBHU is a one-piece, non-welded connector that may be used with both trusses and solid engineered wood beams. Because the Strong-Drive® SDS Heavy-Duty Connector screws and Titen HD® heavy-duty screw anchor are provided with the hanger, installation is made simpler. It is simpler to locate the Titen HD anchor in the proper location than it would be with cast-in-place bolts because it is installed after the wall is constructed.\u003c\/p\u003e\n\u003cp\u003eThe MBHU hangers are now offered in Type 316 stainless steel, which offers a High\/Severe level of corrosion resistance, and are delivered in kits with the Type 316 stainless steel fasteners paired with the appropriate anchors.\u003c\/p\u003e\n\u003cstyle\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cstrong\u003eUse all specified fasteners. Verify that the header can take the fasteners specified in the table.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cstyle\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cb\u003eCalifornia Residents: \u003ca href=\"\/pages\/prop-65\" style=\"color: black;\" target=\"_blank\"\u003eWARNING\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":41130872537224,"sku":"MBHU5.50\/11.88SSKT","price":1175.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/8644\/4936\/products\/MBHU5.50-11.25KT_dc818011-be60-43ce-adac-d8c5714e4170.jpg?v=1683053469"},{"product_id":"simpson-mbhu5-50-18sskt-masonry-beam-face-mount-hanger-stainless-steel","title":"Simpson MBHU5.50\/18SSKT Masonry Beam Hanger W\/Screws - Stainless Steel","description":"\u003cp\u003eFor face-mounted connections between beams and masonry or concrete walls, there is the Simpson MBHU Masonry Beam Face-Mount Hanger. The MBHU is a one-piece, non-welded connector that may be used with both trusses and solid engineered wood beams. Because the Strong-Drive® SDS Heavy-Duty Connector screws and Titen HD® heavy-duty screw anchor are provided with the hanger, installation is made simpler. It is simpler to locate the Titen HD anchor in the proper location than it would be with cast-in-place bolts because it is installed after the wall is constructed.\u003c\/p\u003e\n\u003cp\u003eThe MBHU hangers are now offered in Type 316 stainless steel, which offers a High\/Severe level of corrosion resistance, and are delivered in kits with the Type 316 stainless steel fasteners paired with the appropriate anchors.\u003c\/p\u003e\n\u003cstyle\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cstrong\u003eUse all specified fasteners. Verify that the header can take the fasteners specified in the table.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cstyle\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cb\u003eCalifornia Residents: \u003ca href=\"\/pages\/prop-65\" style=\"color: black;\" target=\"_blank\"\u003eWARNING\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":41130872569992,"sku":"MBHU5.50\/18SSKT","price":1275.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/8644\/4936\/products\/MBHU5.50-11.25KT_6f301732-8346-410e-80a1-ae0ec4ac1be2.jpg?v=1683053482"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/8644\/4936\/collections\/media_28cf35f7-dd6c-4818-986b-0d6c5ef534ea.jpg?v=1722875137","url":"https:\/\/www.fastenersplus.com\/collections\/mbhu-masonry-beam-hangers\/width-5-1-2.oembed","provider":"Fasteners Plus","version":"1.0","type":"link"}