1/2" x 5-1/2" Strong-Tie Wedge-All Anchor, 303 Stainless Steel, Pkg 25

SKU: WA505124SS

$82.47

Simpson Wedge-All anchors are non-bottom-bearing, ICC-ES code compliant anchors made to be installed in uncracked concrete & grout filled concrete masonry. The length of this anchor is the overall length of the anchor and one anchor diameter plus the fixture thickness should be allowed when selecting an overall length for your project.


California Residents: WARNING

Caution:

Do not use an impact wrench to set or tighten anchors

Oversized holes in the base material will make it difficult to set the anchor and will reduce the anchor’s load capacity

Simpson Wedge-All anchors are non-bottom-bearing, ICC-ES code compliant anchors made to be installed in uncracked concrete & grout filled concr...

Read More

Simpson Wedge-All anchors are non-bottom-bearing, ICC-ES code compliant anchors made to be installed in uncracked concrete & grout filled concrete masonry. The length of this anchor is the overall length of the anchor and one anchor diameter plus the fixture thickness should be allowed when selecting an overall length for your project.


California Residents: WARNING

Caution:

Do not use an impact wrench to set or tighten anchors

Oversized holes in the base material will make it difficult to set the anchor and will reduce the anchor’s load capacity

Show Less

Diameter:
1/2"

Thread Length:
4-1/16"

Drill Bit Size:
1/2"

Quantity:
25

Finish Spec:
Plain

Length Spec:
5-1/2"

Installation Torque:
60 ft. lbs

Manufacturer Name:
Simpson Strong-Tie

Material:
303 or 304 Stainless Steel

Product Guide:

Read More

Show Less

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
S
Stephen Horton
Wedge anchors

Stainless steel wedge anchors are awesome! The 1/2” carbide bit cut through the concrete 4” deep 74 times and is still like new! Awesome products. Unfortunately I can’t write a review on the epoxy due to the fact that I didn’t use it, turns out it is not recommended to use with the wedge anchors. Glad I called your customer service and got that information from you!



Recently Viewed

    Customer Reviews

    Based on 1 review
    100%
    (1)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    S
    Stephen Horton
    Wedge anchors

    Stainless steel wedge anchors are awesome! The 1/2” carbide bit cut through the concrete 4” deep 74 times and is still like new! Awesome products. Unfortunately I can’t write a review on the epoxy due to the fact that I didn’t use it, turns out it is not recommended to use with the wedge anchors. Glad I called your customer service and got that information from you!