Simpson HWU5.50/16 Top Flange I-Joist Hanger - G90 Galvanized

SKU: HWU5.50-16
$49.99
You save 24%
$38.22

The Simpson Strong-Tie HWU series hangers are designed to hang joists, purlins or beams. Hangers may be welded to steel headers with 1-1/2" fillet welds located at each end of the top flange. The Strong-Tie HWU5.50/16 top flange hanger features a G90 galvanized finish for added corrosion resistance and requires the use of hot-dip galvanized fasteners which meet the specifications of ASTM A153


Installation:
  • Use all specified fasteners.
  • Hangers may be welded to steel headers with 1/8" for W, 3/16" for WP, WPU, and 1/4" for HW, HWU by 1 1/2" fillet welds located at each end of the top flange. Weld-on applications produce maximum allowable load listed.
  • Hangers can support multi-ply carried members; the individual members must be secured together to work as a single unit before installation into the hanger.
  • Hangers can support joists sloped up to 1/4:12 using table loads. For joists sloping between 1/4:12 and 3/4:12 use 85% of the table loads.
  • Web stiffeners are required for standard joist nailing configuration with these hangers.

NOTE: The correct fasteners installed in the correct position must be used to achieve published load values


California Residents: WARNING

The Simpson Strong-Tie HWU series hangers are designed to hang joists, purlins or beams. Hangers may be welded to steel headers with 1-1/2" fillet ...

Read More

The Simpson Strong-Tie HWU series hangers are designed to hang joists, purlins or beams. Hangers may be welded to steel headers with 1-1/2" fillet welds located at each end of the top flange. The Strong-Tie HWU5.50/16 top flange hanger features a G90 galvanized finish for added corrosion resistance and requires the use of hot-dip galvanized fasteners which meet the specifications of ASTM A153


Installation:
  • Use all specified fasteners.
  • Hangers may be welded to steel headers with 1/8" for W, 3/16" for WP, WPU, and 1/4" for HW, HWU by 1 1/2" fillet welds located at each end of the top flange. Weld-on applications produce maximum allowable load listed.
  • Hangers can support multi-ply carried members; the individual members must be secured together to work as a single unit before installation into the hanger.
  • Hangers can support joists sloped up to 1/4:12 using table loads. For joists sloping between 1/4:12 and 3/4:12 use 85% of the table loads.
  • Web stiffeners are required for standard joist nailing configuration with these hangers.

NOTE: The correct fasteners installed in the correct position must be used to achieve published load values


California Residents: WARNING

Show Less

For Treated Lumber:
no

Finish Spec:
G90 Galvanized

Height:
16"

Joist Size:
5-1/4" X 16"

Manufacturer Name:
Simpson Strong-Tie

Thickness:
10 Gauge

Product Guide:

Read More

Show Less



Recently Viewed