You are false away from free shipping

Simpson ECC3 1/4-6HDG End Column Cap - Hot Dip Galvanized

$120.69
SKU: ECC3 1/4-6HDG
(0) No Reviews yet
QuantityUnit PriceSave
$120.69
Made To Order
Standard Lead Time 21-28 days.
Details

  • This item is made to order and is non-returnable- Please call us at 888-794-1590 for exact lead times on this product
  • Simpson Strong-Tie ECC end column caps provide a high-capacity connection for column-beam combinations. This design requires the correct corresponding machine bolts to be installed for proper installation. The Strong-Tie ECC3 1/4-6HDG post base features a hot-dip galvanized coating. The minimum average coating weight is 2.0 oz./ft2 (per ASTM A123 total both sides). This product requires hot-dip galvanized fasteners (fasteners which meet the specifications of ASTM A153).

    Installation:
    • Use all specified fasteners.
    • Bolt holes shall be a minimum of 1/32" to a maximum of 1/16" larger than the bolt diameter (per 2005 NDS, section 11.1.2).
    • Contact engineered wood manufacturers for connections that are not through the wide face.

    Options:
    • Straps may be rotated 90° where W1?W2 (see illustration) and for CC5 1/4-6.
    • For special, custom, or rough cut lumber sizes, provide dimensions. An optional W2 dimension may be specified. (The W2 dimension on straps rotated 90° is limited by the W1 dimension.)
    • Contact engineered wood manufacturers for connections that are not through the wide face.

    NOTE: The correct fasteners installed in the correct position must be used to achieve published load values

    Looking for something different? See the rest of our Simpson ECC End Column Caps.


    California Residents: WARNING

    Specifications

    Post Size:6X
    Beam Size:3-1/8"
    Thickness:7 Gauge
    Finish:Hot Dip Galvanized
    For Use With Treated Lumber:yes
    Manufacturer Name:Simpson Strong-Tie
    Product Guide Document:View Spec Sheet
    Fasteners Required:Beam - (2) 5/8" Machine Bolts
    Post - (2) 5/8" Machine Bolts

  • This item is made to order and is non-returnable- Please call us at 888-794-1590 for exact lead times on this product
  • Simpson Strong-Tie ECC end column caps provide a high-capacity connection for column-beam combinations. This design requires the correct corresponding machine bolts to be installed for proper installation. The Strong-Tie ECC3 1/4-6HDG post base features a hot-dip galvanized coating. The minimum average coating weight is 2.0 oz./ft2 (per ASTM A123 total both sides). This product requires hot-dip galvanized fasteners (fasteners which meet the specifications of ASTM A153).

    Installation:
    • Use all specified fasteners.
    • Bolt holes shall be a minimum of 1/32" to a maximum of 1/16" larger than the bolt diameter (per 2005 NDS, section 11.1.2).
    • Contact engineered wood manufacturers for connections that are not through the wide face.

    Options:
    • Straps may be rotated 90° where W1?W2 (see illustration) and for CC5 1/4-6.
    • For special, custom, or rough cut lumber sizes, provide dimensions. An optional W2 dimension may be specified. (The W2 dimension on straps rotated 90° is limited by the W1 dimension.)
    • Contact engineered wood manufacturers for connections that are not through the wide face.

    NOTE: The correct fasteners installed in the correct position must be used to achieve published load values

    Looking for something different? See the rest of our Simpson ECC End Column Caps.


    California Residents: WARNING

    Post Size:6X
    Beam Size:3-1/8"
    Thickness:7 Gauge
    Finish:Hot Dip Galvanized
    For Use With Treated Lumber:yes
    Manufacturer Name:Simpson Strong-Tie
    Product Guide Document:View Spec Sheet
    Fasteners Required:Beam - (2) 5/8" Machine Bolts
    Post - (2) 5/8" Machine Bolts

    Ratings & Reviews

    No reviews available

    Be the first to Write a Review