SKU: HELI37700A

Simpson HELI37700A Heli-Tie 3/8" x 7" Helical Wall tie, Pkg 50

Simpson HELI37700A Heli-Tie 3/8" x 7" Helical Wall tie, Pkg 50!

  • Simpson HELI37700A HeliTie 38 inch x 7 inch Helical Wall tie Pkg 50 image 1 of 7
  • Simpson HELI37700A HeliTie 38 inch x 7 inch Helical Wall tie Pkg 50 image 2 of 7
  • Simpson HELI37700A HeliTie 38 inch x 7 inch Helical Wall tie Pkg 50 image 3 of 7
  • Simpson HELI37700A HeliTie 38 inch x 7 inch Helical Wall tie Pkg 50 image 4 of 7
  • Simpson HELI37700A HeliTie 38 inch x 7 inch Helical Wall tie Pkg 50 image 5 of 7
  • Simpson HELI37700A HeliTie 38 inch x 7 inch Helical Wall tie Pkg 50 image 6 of 7
  • Simpson HELI37700A HeliTie 38 inch x 7 inch Helical Wall tie Pkg 50 image 7 of 7
1 7

Continue Browsing

Helical Wall Ties
SKU: HELI37700A

Simpson HELI37700A Heli-Tie 3/8" x 7" Helical Wall tie, Pkg 50

$232.88
 
Request Bulk Pricing
Request Bulk Pricing
Ships FREE Dec 16 when you add 1 to your cart
Fill out the form below or give our sales consultants a call at 866-421-4854.

Specifications

Diameter: 3/8"
Length: 7"
Material: 304 Stainless Steel
Drill bit size: 7/32" or 1/4"
Manufacturer name: Simpson Strong-Tie
Description

The Simpson Strong-Tie Heli-Ties are designed to anchor building facades to structural members such as concrete block. These helical wall ties are made from 304 stainless steel for a long lasting service life and excellent corrosion resistance. The helical design makes installation quick into the predrilled pilot hole. An SDS-Plus rotohammer along with the proprietary HELITOOL37A Installation Tool.


Installation:
  • Drill pilot hole through the façade material and into the backup material to the specified embedment depth + 1" using appropriate drill bit(s) in the chart below. Drill should be in rotation-only mode when drilling into soft masonry or into hollow backing material.
  • Position blue end of the Heli-Tie™ fastener in the installation tool and insert the tie into the pilot hole.
  • With the SDS-plus rotohammer in hammer mode, drive the tie until the tip of the installation tool enters the exterior surface of the masonry and countersinks the tie below the surface. Patch the hole in the façade with a matching masonry hanger.

California Residents: WARNING

More
View full details

Continue Browsing

Helical Wall Ties

× WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects and other reproductive harm. For more information visit: www.P65Warnings.ca.gov.

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
A
Aaron Singer

Worked as intended and currently are holding an old brick veneer from further bowing and sagging. We shall see how they hold up, but this was far more cost effective than removal and replacement. Hardest part of install was the layout - very easy product to use.

  • Our footprint

    We are on a mission to expand our national reach—offering more product selection and faster delivery times. So far we’ve made remarkable progress in our expansion efforts, effectively doubling our capacity by adding a new 47,000 sq. ft. warehouse in Simpsonville, South Carolina, in addition to our existing 60,000 sq. ft. facility in Urbana, Iowa.

  • Our experience

    We pride ourselves on delivering a user-friendly, high quality experience online and over the phone. Our knowledgeable team of experts is readily available via phone to assist with product questions and custom pricing inquiries. We’re available Monday thru Friday from 7:00 AM – 5:00 PM CST. We look forward to supporting you on your next job.

  • Proud distributor

    We partner with trusted manufacturers in the fasteners industry to bring our customers a selection of over 10,000 different products. Fasteners Plus is one of only four Certified Platinum E-Commerce Vendors of Simpson Strong-Tie products, one of the largest suppliers of high-quality structural building products in the world.