SKU: SUL210-2

Simpson SUL210-2 Double Joist Hanger Skewed Left - Galvanized

Simpson SUL210-2 Double Joist Hanger Skewed Left - Galvanized!

Skip to product information
1 of 5
$22.50
 
Request Bulk Pricing
Ships FREE today when you add 9 and order in the next 9 hours 19 minutes
Fill out the form below or give our sales consultants a call at 866-421-4854.

Specifications

Finish: G90 Galvanized
Fasteners required: Face - (14) 0.162" x 3-1/2" Nails OR (14) SD9112 Screws Joist - (6) 0.162" x 2-1/2" Nails OR (6) SD9112 Screws
For Treated Lumber: No
Height: 8-11/16"
Joist size: Double 2X10
Manufacturer name: Simpson Strong-Tie
Width: 3-1/8"
Description

Simpson Strong-Tie SUL joist hangers are skewed 45 degrees left and utilize angled nail slots to direct nails for proper installation. The Strong-Tie SUL210-2 skewed joist hanger features a G90 galvanized coating and requires the use of hot-dip galvanized fasteners which meet the specifications of ASTM A153.


Installation:
  • Use all specified fasteners.
  • These hangers will normally accommodate a 40° to 50° skew.
  • Illustration shows left and right skews SUR/L (SUR=skewed right; SUL=skewed left).
  • The joist end may be square cut or bevel cut.

NOTE: The correct fasteners installed in the correct position must be used to achieve published load values


California Residents: WARNING

View full details
× WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects and other reproductive harm. For more information visit: www.P65Warnings.ca.gov.

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
K
Keith Green

I will be returning them because they will not work for the application that I purchased them for. The product is of very good quality but they are to wide to mount them on 6x6 post.