Fasteners Plus will be closed on 12/24, 12/25, 12/31 and 1/1/21 for the holidays to allow our employees to spend time with their families. Shipments will resume on Mon. 12/28 and 1/4/21 respectively Click to see our COVID-19 updates
888-794-1590
Fasteners Plus will be closed on 12/24, 12/25, 12/31 and 1/1/21 for the holidays to allow our employees to spend time with their families. Shipments will resume on Mon. 12/28 and 1/4/21 respectively Click to see our COVID-19 updates

Simpson SUR1.81/9 I-Joist Hanger Skewed Right - G90 Galvanized

SKU: SUR1.81-9
$16.18

Simpson Strong-Tie SUR joist hangers are skewed 45 degrees right and utilize angled nail slots to direct nails for proper installation. The Strong-Tie SUR1.81/9 skewed joist hanger features a G90 galvanized coating and requires the use of hot-dip galvanized fasteners which meet the specifications of ASTM A153.


Installation:
  • Use all specified fasteners.
  • These hangers will normally accommodate a 40° to 50° skew.
  • Illustration shows left and right skews SUR/L (SUR=skewed right; SUL=skewed left).
  • The joist end may be square cut or bevel cut.

NOTE: The correct fasteners installed in the correct position must be used to achieve published load values


California Residents: WARNING

Simpson Strong-Tie SUR joist hangers are skewed 45 degrees right and utilize angled nail slots to direct nails for proper installation. The Strong-...

Read More

Simpson Strong-Tie SUR joist hangers are skewed 45 degrees right and utilize angled nail slots to direct nails for proper installation. The Strong-Tie SUR1.81/9 skewed joist hanger features a G90 galvanized coating and requires the use of hot-dip galvanized fasteners which meet the specifications of ASTM A153.


Installation:
  • Use all specified fasteners.
  • These hangers will normally accommodate a 40° to 50° skew.
  • Illustration shows left and right skews SUR/L (SUR=skewed right; SUL=skewed left).
  • The joist end may be square cut or bevel cut.

NOTE: The correct fasteners installed in the correct position must be used to achieve published load values


California Residents: WARNING

Show Less

finish spec:
G90 Galvanized

manufacturer name:
Simpson Strong-Tie

fasteners required:
Face - (12) 0.162" x 3-1/2" Nails OR (12) SD9112 Screws
Joist - (2) 0.148" x 1-1/2" Nails OR (2) SD9112 Screws

for treated lumber:
no

height:
9"

joist size:
1-1/2" X 9-1/4"

thickness:
16 Gauge

Product Spec Sheet: