Fasteners Plus will be closed on 12/24, 12/25, 12/31 and 1/1/21 for the holidays to allow our employees to spend time with their families. Shipments will resume on Mon. 12/28 and 1/4/21 respectively Click to see our COVID-19 updates
888-794-1590
Fasteners Plus will be closed on 12/24, 12/25, 12/31 and 1/1/21 for the holidays to allow our employees to spend time with their families. Shipments will resume on Mon. 12/28 and 1/4/21 respectively Click to see our COVID-19 updates

Simpson PS218PC Piling Support Strap - Black Powder Coated

SKU: PS218PC
$11.51
Made to Order
Standard Lead Time 21-28 days.

  • This item is made to order with varied lead times - Please call us at 888-794-1590 for exact lead times on this product
  • Simpson Strong-Tie HSTPC/PSPC non-notched straps are exposed ornamental straps designed for providing transfer tension loads. The PS218PC piling support strap features a flat black powder-coated finish which produces a much more durable and better looking finish than standard paint.

    Installation:
    • Use all specified fasteners.
    • Allowable loads have been increased 60% for wind or earthquake loading with no further increase allowed; reduce where other loads govern.
    • Allowable loads are based on parlallel-to-grain loading and a minimum member thickness of 3 1/2" with machine bolts in a single shear. Straps must be centered about splice joint and bolt edge distances must meet NDS minimum requirements.
    • Designer must determine allowable loads when combining bolts parallel and perpendicular to grain.

    NOTE: The correct fasteners installed in the correct position must be used to achieve published load values


    California Residents: WARNING

  • This item is made to order with varied lead times - Please call us at 888-794-1590 for exact lead times on this product
  • Simps...

    Read More

  • This item is made to order with varied lead times - Please call us at 888-794-1590 for exact lead times on this product
  • Simpson Strong-Tie HSTPC/PSPC non-notched straps are exposed ornamental straps designed for providing transfer tension loads. The PS218PC piling support strap features a flat black powder-coated finish which produces a much more durable and better looking finish than standard paint.

    Installation:
    • Use all specified fasteners.
    • Allowable loads have been increased 60% for wind or earthquake loading with no further increase allowed; reduce where other loads govern.
    • Allowable loads are based on parlallel-to-grain loading and a minimum member thickness of 3 1/2" with machine bolts in a single shear. Straps must be centered about splice joint and bolt edge distances must meet NDS minimum requirements.
    • Designer must determine allowable loads when combining bolts parallel and perpendicular to grain.

    NOTE: The correct fasteners installed in the correct position must be used to achieve published load values


    California Residents: WARNING

    Show Less

    finish spec:
    Textured Black Powder-Coat

    length spec:
    18"

    manufacturer name:
    Simpson Strong-Tie

    fasteners required:
    (4) 3/4" Machine Bolts

    thickness:
    7 Gauge

    Product Spec Sheet: