Snatch Block w/ Hook – 304 Stainless Steel
When you need to redirect a wire rope pull without threading rope through a closed eye, a snatch block with hook lets you open the side plate, drop the rope in, and get back to work. This 304 stainless steel line is built for outdoor, marine, and corrosive environments where standard coated blocks rust out fast - think towing, winching, load positioning, and rigging setups on job sites, boats, trailers, and equipment yards. Each block runs on a brass bushing for smooth sheave rotation and reduced wire rope wear, and the hook opens the block for fast, tool-free loading instead of requiring you to feed rope through a fixed eye.
Common Uses
- Changing pull direction when winching or recovering vehicles and equipment
- Load positioning and rigging on job sites and in equipment yards
- Marine and dock applications where corrosion resistance matters
- Trailer and towing setups needing a quick-attach block
- General mechanical advantage setups with wire rope
How to Choose the Right Snatch Block
Three specs determine fit: wire rope diameter, sheave size, and working load limit (WLL). Match the block to your rope diameter first, then confirm the WLL covers your actual working load with margin to spare — never load rigging hardware at or above its rated limit.
All three are 304 stainless steel with a brass bushing, so the choice comes down to matching your wire rope diameter and confirming the WLL fits your application. For load ratings, rigging configuration, and inspection requirements beyond WLL, follow your equipment manufacturer's documentation and applicable OSHA rigging standards - this page covers product selection, not engineering or safety certification.
Complete the Job
Pair your snatch block with the wire rope, shackles, and thimbles your rigging calls for. If this collection doesn't have the exact configuration you need, browse related options in Snatch Blocks & Wire Rope Pulleys, including the Snatch Block w/ Shackle, Double Swivel w/ Hook, Cable Block, and Crosby® McKissick® Snatch Blocks.
Frequently Asked Questions
What's the difference between a snatch block and a regular pulley block?
A snatch block has a side plate that opens, so you can load the wire rope into the sheave without threading it through a closed eye. A standard pulley block requires you to feed the rope end-to-end through the frame.
Why 304 stainless steel instead of galvanized or coated steel?
304 stainless resists corrosion in wet, salt-exposed, and outdoor conditions better than plated or painted finishes, which matters for marine use, coastal job sites, and equipment stored outdoors year-round.
What does the brass bushing do?
It supports the sheave as it rotates, keeping the wire rope moving smoothly through the block and reducing wear on both the rope and the sheave compared to a bare pin.
How do I know which working load limit I need?
Identify the maximum load your rigging setup will actually pull or support, then choose a block with a WLL that provides margin above that figure. Never load a block at or beyond its rated WLL, and confirm your full rigging chain (rope, shackles, hooks) is rated to match the lowest-rated component.
Do these come with the hook attached?
Yes, each block in this collection ships with the hook already installed for quick attachment to your rigging point.
