2" Ratchet Straps

2-Inch Ratchet Straps for Medium to Heavy-Duty Securement

Step up from light tie downs without jumping to bulky 4-inch gear. Our 2-inch ratchet straps span the sweet spot for everyday hauling on pickups, flatbeds, utility trailers, and enclosed cargo. Stretch the webbing across your load, ratchet to proper tension, and roll with confidence.

Built with industrial polyester webbing, these straps resist stretching and moisture while standing up to abrasion. Clear working load limit labels help you match the right strap to the job and stay compliant on the road.

Common Uses for 2-Inch Ratchet Straps:

• Hot shot and LTL loads on stake-bed or flatbed trailers.
• Securing skid steers, compact equipment, and jobsite materials.
• Palletized freight, lumber, pipe, and sheet goods.
• Auto, powersports, and general moving applications.

Key Features:

• Durable Webbing: Industrial-grade polyester resists water and stretch. Most assemblies use 12,000 lb break-strength webbing. Heavy-duty options use 13,000 lb webbing for added margin.
• Reliable Hardware: Choose zinc-coated or stainless ratchets, including long, wide-handled models for extra leverage.
• End Fittings for Any Anchor Point:

Flat Hooks: Compatible with most trailers and rub rails for a strong, secure connection.

Wire Hooks: Ideal for narrow anchor points and hard-to-reach tie down locations.

Chain Extensions: Combine chain durability with webbing flexibility for heavy-duty securement.

Snap Hooks: Spring-loaded latches provide added security for demanding tie down applications.

S-Hooks: Vinyl-coated hooks help protect painted cargo and delicate surfaces.

E-Track: Designed for fast, secure attachment to E-track trailer systems.

Endless: Wraps completely around cargo for bundling and applications where hooks are unnecessary.

• Compliance Focused: WLL tags and construction aligned with CVSA, DOT, WSTDA, and North American Cargo Securement best practices.
• Right-Sized Width: A balanced 2-inch profile fills the gap between compact 1-inch and heavy 4-inch systems.

Selection Tips

• Match the WLL: Verify the strap’s working load limit meets or exceeds your application.
• Pick the Webbing: Standard 12,000 lb break strength fits most jobs. Step up to 13,000 lb heavy-duty webbing when you need extra durability.
• Choose the Fitting: Select hardware based on your trailer anchors and access points.

Safety, Care, and Add-Ons

• Inspect Before Use: Do not use straps with cuts, burns, melted fibers, broken stitching, or chemical damage.
• Protect Edges: Add corner protectors to reduce webbing wear and spread load pressure on drywall, plywood, masonry, and steel sheets.
• Replace Smart: Keep 2-inch replacement strap ends on hand so a single damaged end does not sideline an entire assembly.

Other Widths and Related Tie Downs

• 1" Ratchet Straps
• 3" Ratchet Straps
• 4" Ratchet Straps

Helpful FAQs

What length should I choose?

Match strap length to the distance from anchor point to anchor point, then add a buffer for routing around the load. Shorter straps are faster to tension. Longer straps add reach for bulky cargo.

How do I pick the right end fitting?

Use S-hooks for speed, wire hooks for tight anchors, and flat snap hooks when you want a locking connection. If you do not have anchor points, consider endless loop straps around the cargo itself.

What Working Load Limit do I need?

Add up the securement needs of the load and select straps with a WLL that meet or exceed that value. Remember WLL is typically one third of break strength.