2" x 18' Ratchet Strap Tie Down with Wire Hooks

These 2" heavy-duty ratchet straps are built to last. Constructed from premium polyester webbing with a break strength of 13,000 lbs—stronger than the 12,000 lbs found in most standard 2" straps—they provide superior abrasion resistance and performance for your toughest securement jobs.

Quality-Focused Ratchet Strap Construction

• Industrial-Grade Webbing: Stronger 13,000 lb break strength with thicker yarn and more picks per inch than most competitors.
• Superior Abrasion Resistance: Heat-sealed ends and a reinforced edge reduce fraying, tearing, and cutting.
• Built-In Webbing Storage: A sewn loop next to the ratchet provides a place to tuck away excess webbing for a clean setup.
• Longer Fixed End: Positions the ratchet further from the anchor point after wrapping around a rub rail for easier operation.
• Corrosion-Resistant Ratchet: Zinc-plated with a long, wide handle and rubber-covered finger grips for comfort and control.
• Heavy-Duty Wire Hooks: Stronger and more durable than S-hooks. Slim design makes them ideal for D-rings, narrow anchor points, or tight spaces. Zinc-coated for corrosion resistance.
• Industry Compliant: Tagged with working load limit information to meet CVSA guidelines, FMCSA and DOT regulations, WSTDA standards, CHP, and North American Cargo Securement requirements.

All of US Cargo Control's ratchet straps are tagged and stenciled with the working load limit to meet FMCSA and DOT regulations, CVSA and WSTDA guidelines, and North American Cargo Securement standards.

Learn more about proper load handling and securement in the WSTDA safety bulletins.

Ratchet Use Guidelines

According to the WSTDA (section 4.6.8): "When using web tie downs with a winch or ratchet, a minimum of 2 and a maximum of 4 wraps of webbing shall be wound on the winch or ratchet mandrel. Excessive wraps of webbing on the mandrel may reduce the working load limit (WLL) of the web tie down and may interfere with proper operation."

California Residents: WARNING