Clevis sling hooks connect directly to Grade 100 chain using a clevis pin, rather than a master link or shackle, giving you a compact, direct-to-chain connection for overhead lifting and rigging assemblies. They're built to match Grade 100 chain's higher working load limits and are a common choice for crane rigging, chain slings, and other overhead lifting applications.
We stock Grade 100 clevis sling hooks from Gunnebo, KWB, and PEWAG, in sizes from 9/32" through 3/4", with working load limits ranging from roughly 4,300 lbs. to 35,300 lbs. depending on size and manufacturer.
How to Choose the Right Clevis Sling Hook
Match your clevis sling hook to your chain size, working load limit, and application. In any rigging assembly, the overall working load limit is set by the lowest-rated component in the system, so every hook, link, and connector needs to meet or exceed the rating your job requires.
Many of our clevis sling hooks meet standards such as ASTM A952/A952M, ASME B30.10, EN 1677, or AS 3776. Confirm the working load limit and applicable standard listed on each product against your rigging plan, manufacturer documentation, and any project or site requirements before you order.
Rigging hardware should be inspected before every use and removed from service if worn, cracked, bent, or otherwise damaged. Fasteners Plus does not guarantee compliance with any specific code, inspection, or engineering requirement. For questions on fit or application, check with a qualified rigging professional.
Complete Your Rigging Setup
Pair your clevis sling hooks with the rest of your Grade 100 rigging assembly:
Frequently Asked Questions
What's the difference between a clevis sling hook and an eye sling hook?
A clevis sling hook connects directly to chain with a clevis pin, no master link needed. An eye sling hook has an eye that attaches with a master link, shackle, or other connecting hardware. Both are built for overhead lifting; which one you need depends on how the rest of your rigging assembly is set up.
How do I know what working load limit I need?
Your working load limit needs to match or exceed the demands of your specific lift, and every component in the assembly, chain, hooks, and connectors, needs to meet that same rating. Check the WLL listed on each product and confirm it against your rigging plan before ordering.
Are these hooks approved for overhead lifting?
Grade 100 clevis sling hooks are manufactured for overhead lifting and rigging use. Confirm the specific standard (ASTM A952/A952M, ASME B30.10, EN 1677, or AS 3776) required for your job against what's listed on each product, and always inspect hardware before use.
Need Help Choosing?
Our Product Experts can help you match the right sling hook, chain grade, and rigging hardware to your job. Call (888) 794-1590 or email customerservice@fastenersplus.com.
