This strap in olive drab pairs heavy-duty webbing with a ratchet take-up system, giving you the mechanical advantage to secure loads that hand-tightening alone can't match. End hardware is a vinyl-coated S-hook designed to grip anchor points without scratching or marring painted surfaces.

Key Features

• Industrial-grade polyester webbing with a tight weave that holds up under repeated abrasion and rough handling
• Heat-sealed webbing ends that resist fraying so the strap keeps its finished edge over years of use
• Zinc-plated hardware that stands up to weather and everyday corrosion
• Tagged and stenciled with break strength and working load limit information to support compliance with FMCSA and DOT regulations, CVSA and WSTDA guidelines, and North American cargo securement standards

Applications

• Moving and general hauling with pickup trucks and trailers
• Everyday towing and utility trailer use
• Landscaping, construction, and job-site equipment transport
• Flatbed and open-trailer freight hauling

Installation

Wrap the fixed end around the anchor point and feed the free end through the ratchet mandrel, pulling out slack by hand before ratcheting. Tighten in small increments until the load is secure, then close and lock the ratchet handle. Confirm hooks are properly seated on rated anchor points, stay within the strap's working load limit, and re-check tension after the first few miles.