The sliding E-track ratchet strap offers a smarter way to secure cargo inside vans, trailers, or trucks. Unlike standard straps, this design features a movable ratchet that slides along the length of the strap—giving you complete control over where the tensioning point sits. No more struggling with hard-to-reach ratchets or needing a custom strap solution.

Built with industrial-grade polyester webbing, the strap is tightly woven with thicker yarn and a higher pick count for extra durability. The ends are heat-sealed to prevent fraying, and all hardware—including the sliding ratchet—is zinc-coated to resist rust and wear.

Spring-loaded E-fittings snap securely intE-Track Cargo Strap Design Factor

According to the WSTDA, design factor is the "ratio of the breaking strength to the working load limit" and should be 3:1 for these E-track tie down Cargo Straps. This builds in a level of redundancy to account for unknown factors, keeping you, your crew, and those around you safe.

According to the WSTDA (section 4.6.8): "When using web tie downs with a winch or ratchet, a minimum of 2 and a maximum of 4 wraps of webbing shall be wound on the winch or ratchet mandrel. Excessive wraps of webbing on the mandrel may reduce the working load limit (WLL) of the web tie down and may interfere with proper operation."

Learn more about proper load handling and securement in the WSTDA safety bulletins.

California Residents: WARNING