Wheel Strap with Wire Hooks and Rubber Blocks - 12,000 lb Polyester Webbing

This wheel strap is built for vehicle transport and features three wire hooks, a wide-handle ratchet, and rubber tread blocks for tire grip. The rubber blocks are designed to seat into the rain grooves of the tire, helping keep the strap in position during transport.

Made from 12,000 lb industrial-grade polyester webbing, the strap offers durability with minimal stretch. A black Cordura sleeve reinforces the area around the floating hardware to resist wear from contact and friction. The webbing is abrasion- and shrink-resistant, with moisture resistance to reduce the risk of mold or rot.

Key Features:

• Three Wire Hooks: Provide multiple anchor points for secure attachment.
• Rubber Blocks: Fit into tire grooves for added grip and strap stability.
• Wide-Handle Ratchet: Allows for controlled tensioning during tie-down.
• 12,000 lb Polyester Webbing: Abrasion-resistant and built for heavy use.
• Cordura Sleeve: Protects webbing from wear at high-contact areas.
• Vehicle Securement: One strap per tire recommended for complete tie-down.

Ratchet Use Guidelines

According to the WSTDA (section 4.6.8): "When using web tie downs with a winch or ratchet, a minimum of 2 and a maximum of 4 wraps of webbing shall be wound on the winch or ratchet mandrel. Excessive wraps of webbing on the mandrel may reduce the working load limit (WLL) of the web tie down and may interfere with proper operation."

California Residents: WARNING