15' x 20' ANSI A10.11 Personnel Safety Net with Debris Liner | 17,500 lbs.
15' x 20' ANSI A10.11 Personnel Safety Net with Debris Liner | 17,500 lbs.!
15' x 20' ANSI A10.11 Personnel Safety Net with Debris Liner | 17,500 lbs.
Specifications
Debris liner size: 1/16"
Debris liner opacity: 70%
Cord diameter: 5 mm
Hook size: 4-3/4" (120 mm) Snap Hooks (included)
UV Rating: 300kLy
When crews are working above grade, dropped tools and small hardware create almost as much risk as the fall itself. This personnel safety net pairs a 17,500 ft-lb dynamic-drop-rated fall protection net with an attached WS70 1/16" debris liner, giving elevated work areas a single fall safety net system that handles both personnel fall arrest and small-particle containment. Built to ANSI A10.11 and offered across a full range of panel sizes and shapes, it's a straightforward way to close the gap between a bare safety net and a job site that also needs debris control.
Key Features
- Dynamic drop rating: Tested to 17,500 ft-lb under the ANSI A10.11 dynamic drop-test method, dropping a 350 lb weight three times from 50 ft into a 17 x 24 ft bordered net.
- 3.5" diamond mesh construction: Knotted from #120 (5.0 mm) high-tenacity industrial-grade nylon cord at 0.0650 lb/ft² for reliable energy absorption during a fall.
- 6,700 lb-rated border rope: A 1/2" high-tenacity nylon rope frames the panel, meeting a 6,700 lb minimum tensile strength standard.
- Staggered panel-to-panel snap hooks: 4.72" (120 mm) snap hooks run along the border so adjoining net panels connect quickly into one continuous system.
- Attached WS70 debris liner: A lightweight, tear-resistant 1/16" knit mesh liner (0.0358 lb/ft²) is bonded to the border rope with 15-gauge hog ring crimp fasteners, adding small-particle containment to the fall protection net.
- Built to standard: Flame-retardant treated to NFPA 701 Method 2, UV rated to 300 kLy, and manufactured to meet OSHA requirements for personnel net installations.
- Know its limits: The WS70 liner is sized for small-particle containment, tools, fasteners, and small hardware, not large construction debris; pair it with a dedicated debris containment system when the job produces heavier debris loads.
Applications
- Elevated commercial and industrial construction sites where OSHA-compliant fall protection netting is required around floor openings, leading edges, or below elevated work platforms.
- Job sites where crews are working above other trades, walkways, or public areas and need a personnel safety net that also catches dropped tools, fasteners, and small hardware.
- Steel erection, bridge work, and multi-story framing projects that use an OSHA safety net system as part of the site's overall fall protection plan.
- Multi-panel installations where personnel safety nets need to connect edge to edge across a wider opening or elevation than a single panel can cover.
- Renovation and demolition sites that need small-particle debris netting alongside personnel fall protection, without taking on a full heavy-debris containment system.
Add the Essentials
Complete your order with these essentials, compatible with:
15' x 20' ANSI A10.11 Personnel Safety Net with Debris Liner | 17,500 lbs.
My Cart:
Add the Essentials
Complete your order with these essentials, compatible with:
15' x 20' ANSI A10.11 Personnel Safety Net with Debris Liner | 17,500 lbs.
My Cart:
-
ANSI-Tested Fall Protection
InCord personnel safety nets are built to comply with ANSI A10.11-2010, meeting or exceeding OSHA's requirements for fall protection. Rated for dynamic loads up to 17,500 ft-lb and produced in an ISO 9001:2015-certified facility, these nets are engineered for job sites where there's no margin for error.
-
Highest Quality Materials in the Industry
Made in the USA from high-tenacity polyamide, this 5mm knotted nylon safety net offers impressive strength while staying lightweight. Its border is reinforced with synthetic rope carrying a 6,700 lb. minimum tensile strength, and zinc-plated snap hooks ensure a secure, rust-resistant connection. A fire-retardant monofilament debris liner rounds out the design, adding extra protection against smaller falling debris.
-
Safety Netting Built to Your Specifications
When off-the-shelf netting doesn't quite fit your application, custom safety netting can be built to your precise specs. Manufactured in the USA and suited to a wide range of uses, it lets you dial in the size, accessories, and other details yourself, so the final product is built around your job, not the other way around.
-
We are on a mission to expand our national reach—offering more product selection and faster delivery times. So far we’ve made remarkable progress in our expansion efforts, effectively doubling our capacity by adding a new 47,000 sq. ft. warehouse in Simpsonville, South Carolina, in addition to our existing 60,000 sq. ft. facility in Urbana, Iowa.
-
We pride ourselves on delivering a user-friendly, high quality experience online and over the phone. Our knowledgeable team of experts is readily available via phone to assist with product questions and custom pricing inquiries. We’re available Monday thru Friday from 7:00 AM – 5:00 PM CST. We look forward to supporting you on your next job.
-
We partner with trusted manufacturers in the fasteners industry to bring our customers a selection of over 10,000 different products. Fasteners Plus is one of only four Certified Platinum E-Commerce Vendors of Simpson Strong-Tie products, one of the largest suppliers of high-quality structural building products in the world.
