Recessed Bolt-On D-Ring – 900 lb Break Strength

The Recessed Bolt-On D-Ring provides a flush-fitting, low-profile tie-down solution for trailers, enclosed vans, and utility vehicles. With a 900 lb break strength and zinc-plated galvanized finish, this anchor is ideal for transporting light vehicles such as motorcycles, snowmobiles, ATVs, and UTVs.

Key Features

• 900 lb Break Strength – Designed for light-duty cargo securement
• Galvanized Steel – Resists corrosion from moisture and weather exposure
• Recessed Floor Mount – Perfect for trailer floors; allows wheeled equipment to roll over unobstructed
• Fold-Flat Design – D-ring stays out of the way when not in use
• Weep Hole Included – Built-in drainage hole prevents water accumulation
• Two Pre-Drilled Holes – Enables quick and secure bolt-on installation

Ideal For

Commonly used in enclosed trailers, utility trailers, and floor-mounted cargo areas where a flush profile is important for safety and ease of loading. Compatible with S-hook ratchet straps and similar tie-down tools.

Installation Notes

This recessed D-ring installs with two pre-drilled holes and must be set into a cutout for flush mounting. To achieve maximum load rating, bolt completely through the mounting surface using fender washers and locking nuts or apply threadlocker.

Note: Not rated for overhead lifting. Be sure to verify compatibility with your tie-down hooks and trailer surface.

⚠️Warning: Tie Down Hardware

Read and follow all provided instructions, guidelines, and maintenance recommendations before use.

Never exceed the maximum load capacity.

Inspect before each use for signs of deformation, corrosion, and wear, such as cuts or fraying on tie down straps or ropes. If damaged, discard and replace.

When installing, make sure that the tie down hardware is securely attached to a stable surface using appropriate hardware. For complex installations or applications requiring structural integrity, work with a qualified professional to ensure safety.

Only use tie down hardware that is appropriately-rated for the weight and size of your load.

Be careful when handling tie down hardware to prevent strains or injuries. For heavy or awkward loads, seek assistance.

Protect tie downs from potential hazards, such as sharp edges or abrasive surfaces that may damage tie down straps or ropes.

Store in a dry, clean, and dark location with regulated temperatures to extend product longevity.

Keep children and pets away from tie down hardware while being installed / in use.

California Residents: WARNING