Fasteners Plus will be closed on 12/24, 12/25, 12/31 and 1/1/21 for the holidays to allow our employees to spend time with their families. Shipments will resume on Mon. 12/28 and 1/4/21 respectively Click to see our COVID-19 updates
888-794-1590
Fasteners Plus will be closed on 12/24, 12/25, 12/31 and 1/1/21 for the holidays to allow our employees to spend time with their families. Shipments will resume on Mon. 12/28 and 1/4/21 respectively Click to see our COVID-19 updates

Simpson H10ASS Hurricane Tie - Stainless Steel

SKU: H10ASS
$11.90

Simpson Strong-Tie H series of hurricane ties provide a positive connection between truss/rafter and the wall of the structure to resist wind and seismic forces. The Strong-Tie H10ASS Hurricane Tie features a stainless steel finish for added corrosion resistance and requires the use of stainless steel fasteners which meet the specifications of ASTM A153.
Installation:

  • Use all specified fasteners.
  • Use hot-dip galvanized (HDG) nails with ZMAX and HDG connector products. Use Type 316 stainless-steel nails with our stainless-steel connector products.
  • Hurricane ties do not replace solid blocking.
  • When installing ties on plated trusses (on the side opposite the truss plate) do not fasten through the truss plate from behind. This can force the truss plate off of the truss and compromise truss performance.

NOTE: The correct fasteners installed in the correct position must be used to achieve published load values


California Residents: WARNING

Simpson Strong-Tie H series of hurricane ties provide a positive connection between truss/rafter and the wall of the structure to resist wind and s...

Read More

Simpson Strong-Tie H series of hurricane ties provide a positive connection between truss/rafter and the wall of the structure to resist wind and seismic forces. The Strong-Tie H10ASS Hurricane Tie features a stainless steel finish for added corrosion resistance and requires the use of stainless steel fasteners which meet the specifications of ASTM A153.
Installation:

  • Use all specified fasteners.
  • Use hot-dip galvanized (HDG) nails with ZMAX and HDG connector products. Use Type 316 stainless-steel nails with our stainless-steel connector products.
  • Hurricane ties do not replace solid blocking.
  • When installing ties on plated trusses (on the side opposite the truss plate) do not fasten through the truss plate from behind. This can force the truss plate off of the truss and compromise truss performance.

NOTE: The correct fasteners installed in the correct position must be used to achieve published load values


California Residents: WARNING

Show Less

finish spec:
316L Stainless Steel

manufacturer name:
Simpson Strong-Tie

fasteners required:
To Rafters/Truss - (9) 0.148" x 1-1/2" Nails
Top Plates - (9) 0.148" x 1-1/2" Nails

for treated lumber:
yes

thickness:
18 Gauge

Product Spec Sheet: