IMPORTANT COVID-19 UPDATES: How we're staying committed to meeting our customers' needs & protecting our employees. Learn more
888-794-1590

Simpson LMA4Z Mudsill Anchor - Zmax Finish

SKU: LMA4Z
$2.59

Simpson Strong-Tie LMAZ mudsill anchors provide an alternative to anchor bolts. They easily mount on forms and make finishing easier. The unique design provides installation flexibility, eliminating problems with misplaced anchor bolts. Suitable for stem wall or slab foundations, mudsill anchors are one piece so there are no more nuts and washers to lose.


  • Use all specified fasteners (included).
  • CMU shall have a minimum f'm = 1500 psi and concrete shall have a minimum f'c = 2000 psi.
  • Not for use where a horizontal cold joint exists between the slab and foundation wall or footing beneath, unless provisions are made to transfer the load.
  • Not for use in slabs poured over foundation walls formed of concrete block or with brick and 4" masonry block stemwalls.

NOTE: The correct fasteners installed in the correct position must be used to achieve published load values


California Residents: WARNING

Simpson Strong-Tie LMAZ mudsill anchors provide an alternative to anchor bolts. They easily mount on forms and make finishing easier. The unique de...

Read More

Simpson Strong-Tie LMAZ mudsill anchors provide an alternative to anchor bolts. They easily mount on forms and make finishing easier. The unique design provides installation flexibility, eliminating problems with misplaced anchor bolts. Suitable for stem wall or slab foundations, mudsill anchors are one piece so there are no more nuts and washers to lose.


  • Use all specified fasteners (included).
  • CMU shall have a minimum f'm = 1500 psi and concrete shall have a minimum f'c = 2000 psi.
  • Not for use where a horizontal cold joint exists between the slab and foundation wall or footing beneath, unless provisions are made to transfer the load.
  • Not for use in slabs poured over foundation walls formed of concrete block or with brick and 4" masonry block stemwalls.

NOTE: The correct fasteners installed in the correct position must be used to achieve published load values


California Residents: WARNING

Show Less

finish spec:
ZMAX

manufacturer name:
Simpson Strong-Tie

fasteners required:
SEE PRODUCT GUIDE DOCUMENT

for treated lumber:
yes

thickness:
18 Gauge

Product Spec Sheet: