Skip to product information
Shop more OS/OHS Ornamental Strap Ties
SKU: OHS135

Simpson OHS135 Ornamental Strap Tie - Black Powder Coated

Simpson OHS135 Ornamental Strap Tie - Black Powder Coated

Regular price $84.97
Sale price $84.97 Regular price
0% off
shipping truck, lead time icon
Ships today when you order in the next 8 hours 7 minutes
Request Bulk Pricing
Fill out the form below or give our sales consultants a call at 888-794-1590.

Description:

  • This item is made to order with varied lead times - Please call us at 888-794-1590 for exact lead times on this product
  • Simpson Strong-Tie OS/OHS notched straps transfer tension loads across a variety of applications. The OS/OHS strap is for ornamental applications and features a powder-coated black paint for a more finished look. The Strong-Tie OHS135 strap tie features a flat black powder-coated finish which produces a much more durable and better looking finish than standard paint.

    Installation:
    • Use all specified fasteners
    • Allowable loads have been increased 60% for wind or earthquake loading with no further increase allowed; reduce where other loads govern.
    • Allowable loads are based on parallel-to-grain loading and a minimum member thickness of 3 1/2" with machine bolts in single shear. Straps must be centered about splice joint and bolt edge distances must meet NDS minimum requirements.
    • Designer must determine allowable loads when combining bolts parallel and perpendicular to grain

    NOTE: The correct fasteners installed in the correct position must be used to achieve published load values


    California Residents: WARNING

    Specifications:


    Fasteners required: (4) 3/4" Machine Bolts
    Length: 13-1/2"
    Manufacturer name: Simpson Strong-Tie
    Product Guide: View Spec Sheet

    Installation

    -Use all specified fasteners
    -Allowable loads have been increased 60% for wind or earthquake loading with no further increase allowed; reduce where other loads govern.
    -Allowable loads are based on parallel-to-grain loading and a minimum member thickness of 3 1/2" with machine bolts in single shear. Straps must be centered about splice joint and bolt edge distances must meet NDS minimum requirements.
    -Designer must determine allowable loads when combining bolts parallel and perpendicular to grain

    View full details
    Shop more OS/OHS Ornamental Strap Ties
    × WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects and other reproductive harm. For more information visit: www.P65Warnings.ca.gov.

    Customer Reviews

    Be the first to write a review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)