SKU: ZN25034

Simpson ZN25034 1/4" X 3/4" Zinc Nailon Pin Drive Anchor - Zinc, Pkg 100

Simpson ZN25034 1/4" X 3/4" Zinc Nailon Pin Drive Anchor - Zinc, Pkg 100!

Skip to product information

Continue Browsing

Zinc Nailon Anchors

$11.03
 
Request Bulk Pricing
Ships Oct 14
Fill out the form below or give our sales consultants a call at 866-421-4854.

Specifications

Diameter: 1/4"
Length: 3/4"
Material: Carbon Steel
Drill bit size: 1/4"
For Treated Lumber: Yes
Manufacturer name: Simpson Strong-Tie
Quantity: 100
Description
Zinc Nailon anchors are low-cost, mushroom head anchors for applications under static loads. The anchors are easily installed by hitting a hammer on the head that drives the pin through the anchor, expanding the body of the anchor to hold it in place. Ideal for use in concrete, CMU, brick, and other base materials. Pin and head configuration is designed to make anchor tamper-resistant. This product is not for use in overhead applications.
Installation:
  • Drill a hole in base material using a carbide drill bit the same diameter as the nominal diameter of the anchor to be installed. Drill the hole to specified embedment depth, plus 1/4" for pin extension, and blow hole clean using compressed air. Alternatively, drill the hole deep enough to accommodate embedment depth and dust from drilling.
  • Position fixture and insert Nailon anchor.
  • Tap with hammer until flush with fixture, then drive pin until flush with top of head.

  • California Residents: WARNING

View full details

Continue Browsing

Zinc Nailon Anchors

× WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects and other reproductive harm. For more information visit: www.P65Warnings.ca.gov.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)