2 Leg Nylon Bridle Slings
2 Leg Nylon Bridle Slings
Some loads shift or tip when lifted from a single point, and that's exactly the problem a two leg bridle sling solves. Adding a second pick point gives the load a more stable, balanced lift, without the added bulk of a three- or four-leg rig you don't actually need. Two webbing legs run to a single Grade 100 alloy steel master link at the top, with each leg's working end matched to whatever connection style your rigging calls for.
Choosing Your Working-End Fitting
Three fitting options are available on each leg, and picking the right one comes down to how your rigging already connects:
- Safety Hook: a Grade 80 alloy steel hook on each leg gives you a quick, tool-free connection, well suited to repeat lifts or setups already built around hook hardware.
- Master Link: a Grade 100 alloy steel master link at each working end offers a fixed, standardized connection point that pairs with whatever hardware you're already running, hook, shackle, or otherwise.
- Sewn Loop: the webbing is sewn back on itself to form a soft eye at each working end, with no metal fitting at all, ready to take a shackle or pin directly.
Construction and Specifications
Both legs are built from heavy-duty webbing made in the USA to industry standard, rated at 9,800 lbs. per inch. Every sling ships with an attached tag showing working load limits across lifting angles, since a two leg sling's rated capacity depends on the angle between the legs. Need a different length, width, or fitting configuration? Our sales team can put together a custom build to match your job.
Proof Testing & Documentation
Certified proof testing is available for a nominal fee and must be requested when you place your order. Certified slings are individually tested at the factory to twice their rated vertical capacity, with results documented for your compliance records. Outside of a certified request, only select slings are tested as part of routine quality checks, since proof testing at this level requires individual testing during manufacturing.
Sling length is measured from the load-bearing point of one eye or fitting to the load-bearing point of the other. Always confirm the working load limit on the tag for your actual lifting angle, and have a qualified rigger verify load distribution across both legs before the lift.