When a load needs a tie-down that clips onto almost any anchor point without lining up a hook by hand, a flat snap hook earns its keep. This 2 inch ratchet strap puts a spring-loaded keeper on each hook so the connection closes automatically and won't pop open under vibration on a rough road.

The webbing is made with thicker yarn and more picks per inch than most competing straps, heat-sealed at the ends for better resistance to abrasion, tearing, and cutting. A longer fixed end lets you position the ratchet further from the anchor point after wrapping a rub rail, and a sewn-in loop keeps excess webbing tucked away instead of dragging loose.

Key Features

• Flat snap hooks with spring-loaded, self-closing keeper
• Also works with E-track and L-track when paired with an O-ring or pear link fitting
• Thicker, heat-sealed polyester webbing
• Longer fixed end allows ratchet positioning further from the anchor point
• Sewn-in loop for stowing excess webbing
• Zinc-plated hardware
• Long, wide handle with smooth grip for fast tensioning
• Meets FMCSA, DOT, CVSA, and WSTDA North American cargo securement standards
• Available in multiple colors

WSTDA Ratchet Use Guidelines

According to the WSTDA (section 4.6.8): "When using web tie downs with a winch or ratchet, a minimum of 2 and a maximum of 4 wraps of webbing shall be wound on the winch or ratchet mandrel. Excessive wraps of webbing on the mandrel may reduce the working load limit (WLL) of the web tie down and may interfere with proper operation."

Additionally, they define design factor as the "ratio of the breaking strength to the working load limit." The design factor is 3:1 for these tie down straps to build in a level of redundancy, accounting for unknown factors to keep you, your crew, and those around you safe.

California Residents: WARNING