Bolthold eAK4 Asphalt Anchor Kit w/ 4 SP10 & Epoxy Grout
Description
Description
The Bolthold eAK-4 kit provides you with the correct amount of anchors and grout for securing anchors into asphalt. The included SP10-38 anchors are ideal for anchoring bike racks, signs, machinery, and more into asphalt surfaces. The SP10-38 asphalt anchor requires a 7/8" hole that is 6" deep. The length of the bolt inside the anchor should not exceed 3". Each anchor is pre-installed with a 1" long hex bolt and a 1" diameter washer.
You can load the anchors at 80% of their pull rating if the object/structure stands solidly by itself. If the object applies a static pull force on the anchors just as it stands, limit the load to 20% of the pull rating.
Asphalt Anchor Features:
- Asphalt Anchors are mounted flush with the surface.
- A 1.4" header at the top of the anchor prevents the anchor from dropping below the surface and being pulled up into the mounting plate once the bolt is tightened.
- The attached objects can be easily removed without leaving protrusions on the surface.
Kit Includes:
For step-by-step instructions on how to properly install asphalt anchors with grout, see product guide document listed in the specifications tab.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects and other reproductive harm. For more information visit: www.P65Warnings.ca.gov.
Specifications
Specifications
Pull Force: 1500 lbs.
Reviews
Reviews
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.


