Skip to product information
1 of 5
Shop more ABA/ABU/ABW Adjustable Post Bases
SKU: ABA46Z

Simpson ABA46Z 4x6 Adjustable Post Base - Zmax Finish

Simpson ABA46Z 4x6 Adjustable Post Base - Zmax Finish

Regular price $21.58
Sale price $21.58 Regular price
You Save 0%
Sale Sold out

Description:

The Strong-Tie ABA series of adjustable post bases provide a 1" standoff for the post and are slotted for adjustability. The ABA46Z adjustable post base is approved to be installed with the specified nails or with Strong-Drive SD connector screws . The Strong-Tie ABA46Z post base features a G185 ZMAX galvanized finish for added corrosion resistance and requires the use of hot-dip galvanized fasteners which meet the specifications of ASTM A153.


Features:
  • The slot in the base enables flexible positioning around the anchor bolt, making precise post placement easier
  • The 1" standoff helps prevent rot at the end of the post and meets code requirements for structural posts installed in basements or exposed to weather or water splash

Installation:
  • Use all specified fasteners.
  • Post bases do not provide adequate resistance to prevent members from rotating about the base and therefore are not recommended for non top-supported installations (such as fences or unbraced carports).
  • Place the base, load transfer plate and nut on the anchor bolt. Loosely tighten the nut.

ABA
  • Place the post in the ABA.
  • Fasten using nails or SD Screws.

NOTE: The correct fasteners installed in the correct position must be used to achieve published load values

Looking for something different? See the rest of our Simpson Adjustable Post Bases.


California Residents: WARNING

Specifications:


Post Size: 4X6
Fasteners required: - (8) 0.162 x 3-1/2" Nails - (1) 5/8" Concrete Anchor
Manufacturer name: Simpson Strong-Tie
For Treated Lumber: Yes
Product Guide: View Spec Sheet

Features

-The slot in the base enables flexible positioning around the anchor bolt, making precise post placement easier
-The 1" standoff helps prevent rot at the end of the post and meets code requirements for structural posts installed in basements or exposed to weather or water splash

Installation

-Use all specified fasteners.
-Post bases do not provide adequate resistance to prevent members from rotating about the base and therefore are not recommended for non top-supported installations (such as fences or unbraced carports).
-Place the base, load transfer plate and nut on the anchor bolt. Loosely tighten the nut.
ABA
-Place the post in the ABA.
-Fasten using nails or SD Screws.

View full details
Shop more ABA/ABU/ABW Adjustable Post Bases
× WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects and other reproductive harm. For more information visit: www.P65Warnings.ca.gov.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Recently Viewed