Simpson ABA44Z 4x4 Adjustable Post Base - Zmax Finish
Simpson ABA44Z 4x4 Adjustable Post Base - Zmax Finish
Couldn't load pickup availability

Description:
Description:
The Strong-Tie ABA series of adjustable post bases provide a 1" standoff for the post and are slotted for adjustability. The ABA44Z adjustable post base is approved to be installed with the specified nails or with Strong-Drive SD connector screws . The Strong-Tie ABA44Z post base features a G185 ZMAX galvanized finish for added corrosion resistance and requires the use of hot-dip galvanized fasteners which meet the specifications of ASTM A153.
Features:
- The slot in the base enables flexible positioning around the anchor bolt, making precise post placement easier
- The 1" standoff helps prevent rot at the end of the post and meets code requirements for structural posts installed in basements or exposed to weather or water splash
Installation:
- Use all specified fasteners.
- Post bases do not provide adequate resistance to prevent members from rotating about the base and therefore are not recommended for non top-supported installations (such as fences or unbraced carports).
- Place the base, load transfer plate and nut on the anchor bolt. Loosely tighten the nut.
ABA
- Place the post in the ABA.
- Fasten using nails or SD Screws.
NOTE: The correct fasteners installed in the correct position must be used to achieve published load values
Looking for something different? See the rest of our Simpson Adjustable Post Bases.
California Residents: WARNING
Specifications:
Specifications:
Post Size: 4X4
Fasteners required: - (6) 0.148 x 3" Nails - (1) 1/2" Concrete Anchor
Manufacturer name: Simpson Strong-Tie
For Treated Lumber: Yes
Product Guide: View Spec Sheet
Features
Features
-The slot in the base enables flexible positioning around the anchor bolt, making precise post placement easier
-The 1" standoff helps prevent rot at the end of the post and meets code requirements for structural posts installed in basements or exposed to weather or water splash
Installation
Installation
-Use all specified fasteners.
-Post bases do not provide adequate resistance to prevent members from rotating about the base and therefore are not recommended for non top-supported installations (such as fences or unbraced carports).
-Place the base, load transfer plate and nut on the anchor bolt. Loosely tighten the nut.
ABA
-Place the post in the ABA.
-Fasten using nails or SD Screws.
Stay in touch
This is a dummy newsletter form so don't bother trying to test it. Not that I expect you to, anyways. :)





