Simpson CS20 20 Gauge 250 ft. Coiled Strap
Simpson CS20 20 Gauge 250 ft. Coiled Strap
Description:
Description:
The Simpson Strong-Tie CS20 strap is a continuous utility strap that can be cut to length on the job site for maximum versatility. It comes packaged in a lightweight carton (about 40 lbs) for easy handling.
Installation:
- Use all specified fasteners.
- Wood shrinkage after strap installation across horizontal wood members may cause strap to buckle outward.
- Refer to the applicable code for minimum nail penetration and minimum wood edge and end distances.
- The table shows the maximum allowable loads and the nails required to obtain them.
- The cut length of the strap shall be equal to twice the "End Length" noted in the table plus the clear span dimension.
NOTE: The correct fasteners installed in the correct position must be used to achieve published load values
California Residents: WARNING
Specifications:
Specifications:
Fasteners required: SEE PRODUCT GUIDE DOCUMENT
Length: 250'
Manufacturer name: Simpson Strong-Tie
For Treated Lumber: No
Product Guide: View Spec Sheet
Installation
Installation
-Use all specified fasteners.
-Wood shrinkage after strap installation across horizontal wood members may cause strap to buckle outward.
-Refer to the applicable code for minimum nail penetration and minimum wood edge and end distances.
-The table shows the maximum allowable loads and the nails required to obtain them.
-The cut length of the strap shall be equal to twice the "End Length" noted in the table plus the clear span dimension.
-CMST only - Use every other triangle hole if the wood tends to split. Use round and triangle holes for comparable MST loads, providing wood does not tend to split.
Stay in touch
This is a dummy newsletter form so don't bother trying to test it. Not that I expect you to, anyways. :)
Great service...great product!