The HFN hangers are designed for panels or components using jigs or similar devices for precision fabrication. Grip-groove feature provides positive lock into the 2x or 3x member without nailing. F series panel hangers are engineered components for panelized construction only. The Strong-Tie F26-2 panelized construction hanger features a G90 galvanized finish for corrosion resistance and requires the use of hot-dip galvanized fasteners which meet the specifications of ASTM A153

• Use all specified fasteners.
• On the F-series hanger, the diamond hole nail is non-structural and does not contribute to the load.
• Installing two nails through sheathing in middle of hanger achieves full load.

NOTE: The correct fasteners installed in the correct position must be used to achieve published load values

California Residents: WARNING

-Use all specified fasteners.
-On the F-series hanger, the diamond hole nail is non-structural and does not contribute to the load.
-Installing two nails through sheathing in middle of hanger achieves full load.