SKU: LUS28

Simpson LUS28 2x8 Face Mount Hanger - G90 Galvanized

Simpson LUS28 2x8 Face Mount Hanger - G90 Galvanized!

Skip to product information
1 of 3

Continue Browsing

LUS Joist Hangers

$1.65
 
Request Bulk Pricing
Request Bulk Pricing
Ships Dec 16
Fill out the form below or give our sales consultants a call at 866-421-4854.

Specifications

Finish: G90 Galvanized
Fasteners required: Header - (6) 0.148 x 3" Nails OR (6) #9 x 1-1/2" SD Connector Screws Joist - (4) 0.148 x 3" Nails OR (4) #9 x 2-1/2" SD Connector Screws
For Treated Lumber: No
Height: 6-5/8"
Joist size: 2X8
Manufacturer name: Simpson Strong-Tie
Width: 1-9/16"
Description

Simpson Strong-Tie LUS hangers are a light capacity joist hanger that utilize double shear nailing for added strength. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. The Strong-Tie LUS28 face mount joist hanger features a G90 galvanized finish for corrosion resistance and requires the use of hot-dip galvanized fasteners which meet the specifications of ASTM A153.


Installation:
  • Use all specified fasteners.
  • Use hot-dip galvanized (HDG) nails with ZMAX and HDG connector products. Use Type 316 stainless-steel nails with our stainless-steel connector products.
  • Nails must be driven at an angle through the joist or truss into the header to achieve the table loads.
  • Not designed for welded or nailer applications.
  • 16d sinkers (0.148" dia. x 3 1/4" long) may be used where 10d commons are specified with no reduction in load. Where 16d commons are specified, 10d commons or 16d sinkers (0.148" dia. x 3 1/4" long) may be used at 0.85 of the table load.
  • With 2x carrying members, use 10d x 1 1/2" nails into the header and 10d commons into the joist, reduce the load to 0.64 of the table value.

NOTE: The correct fasteners installed in the correct position must be used to achieve published load values


California Residents: WARNING

View full details

Continue Browsing

LUS Joist Hangers

× WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects and other reproductive harm. For more information visit: www.P65Warnings.ca.gov.

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
C
Chad Doucet
Excellent product

I'm glad I purchased these hangers as opposed to the ones that were a bit cheaper. These hangers are of high quality - they are very thick (metal). PLUS the screws that go into the side of the hangers are at the perfect position to squeeze floor joist. In my case, it was 2x8 material. I used mine on a deck and just put a nail in the end to hold it up until I installed these hangers. After I installed the hangers with the screws in both sides, it was amazing how strong everything felt. I would purchase these same hangers again without question.

A
Ashley Teuscher
Great!

Very sturdy!