Simpson Strong-Tie purlin anchors offer solutions for wood-to-concrete and concrete-block connections which satisfy code requirements. The PA’s dual-embedment line allows installation in concrete or concrete block.
Installation:

• Use all specified fasteners; some models have extra fastener holes. See General Notes.
• Purlin anchor must hook around rebar.
• Allowable loads are for a horizontal installation into the side of a concrete or masonry wall.
• Strap may be bent one full cycle (bent vertical 90° then bent horizontal).
• PA51/PA68 — for additional length, an MST strap can be attached using 1/2" bolts through existing holes.
• Refer to technical bulletin PA Foundation Straps for Uplift Resistance (T-PAUPLIFT) for additional information.



California Residents: WARNING

-Use all specified fasteners; some models have extra fastener holes. See General Notes.
-Purlin anchor must hook around rebar.
-Allowable loads are for a horizontal installation into the side of a concrete or masonry wall.
-Strap may be bent one full cycle (bent vertical 90° then bent horizontal).
-PA51/PA68 — for additional length, an MST strap can be attached using 1/2" bolts through existing holes.
-Refer to technical bulletin PA Foundation Straps for Uplift Resistance (T-PAUPLIFT) for additional information.