10" x 6' Endless Twin-Path® High Performance Roundsling | Vertical Cap: 250,000 lbs.
Lengths
Description
Description
A 10 inch twin-path endless lifting sling is sized for very large loads, the kind that show up on precast and structural steel jobs. An endless twin path roundsling, this twin-path endless lifting sling and endless HMPE sling is stronger than a comparably sized wire rope or chain sling at only about 10% of the weight, easier for riggers to handle, and a good fit for fragile cargo since it's synthetic. This mid-range model carries a 250,000 lb. vertical capacity.
Key Features
- Twin-Path construction uses two independent paths of K-Spec® core yarn under a protective outer jacket, so each path acts as its own connection between hook and load
- The Covermax® jacket uses two layers of industrial-grade nylon, giving more than four times the abrasion resistance of a polyester jacket
- Repairable if the jacket is damaged but the core yarns are unharmed
- Check-Fast® inspection system flags core yarn damage or overload at a glance
- Non-conductive, non-corrosive, water-resistant, UV-resistant, and load-conforming
- 1% elongation at rated capacity; load-tested to 200% of capacity
- Meets ASME B30.9 standards; temperature range -40°F (-40°C) to 180°F (82°C)
Applications
- General rigging jobs, such as machinery moves, that need solid capacity without the largest sizes in the line
- Low-headroom lifts where 1% elongation at rated capacity keeps the load from shifting
- Jobs needing a quick visual overload check between lifts via the Check-Fast® system
Complete Your Sling Setup
Finish your lifting setup with the right supporting hardware and protection. Add sling protection to help guard against abrasion, edges, and wear, and pair your sling with a properly rated wide body shackle such as the Crosby® G-2160 Bolt Type Wide Body Shackle or Van Beest Green Pin® P-6033 Wide Body Sling Shackle.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects and other reproductive harm. For more information visit: www.P65Warnings.ca.gov.
Specifications
Specifications
Minimum bending radius: 1.65"
Tapered Body Width: 5"
Reviews (0)
Reviews (0)
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.


