Simpson SUR26Z 2x6 45 Degree Joist Hanger Skewed Right - Zmax Finish
Simpson SUR26Z 2x6 45 Degree Joist Hanger Skewed Right - Zmax Finish
Couldn't load pickup availability

Description:
Description:
Simpson Strong-Tie SUR joist hangers are skewed 45 degrees left and utilize angled nail slots to direct nails for proper installation. The Strong-Tie SUR26Z skewed joist hanger features a G185 ZMAX galvanized finish for added corrosion resistance and requires the use of hot-dip galvanized fasteners which meet the specifications of ASTM A153.
Installation:
- Use all specified fasteners.
- These hangers will normally accommodate a 40° to 50° skew.
- Illustration shows left and right skews SUR/L (SUR=skewed right; SUL=skewed left).
- The joist end may be square cut or bevel cut.
NOTE: The correct fasteners installed in the correct position must be used to achieve published load values
California Residents: WARNING
Specifications:
Specifications:
Height: 5"
Fasteners required: Face - (6) SD9112 Screws Joist - (6) SD9112 Screws
Width: 1-9/16"
Manufacturer name: Simpson Strong-Tie
For Treated Lumber: Yes
Joist size: 2X6
Product Guide: View Spec Sheet
Installation
Installation
-Use all specified fasteners.
-These hangers will normally accommodate a 40° to 50° skew.
-Illustration shows left and right skews SUR/L (SUR=skewed right; SUL=skewed left).
-The joist end may be square cut or bevel cut.
Stay in touch
This is a dummy newsletter form so don't bother trying to test it. Not that I expect you to, anyways. :)


