Custom Spreader Beam End Caps
Build a spreader beam sized exactly for your application with spreader beam end caps. These end caps connect to the ends of a pipe you supply, and are built to meet ASME B30.20 and OSHA requirements when assembled to spec.
Spreader Beam End Cap Kit Capacities
Capacity depends on the length of pipe you use. Use the charts below to find the spread and working load limit combination that fits your job.
Note: These working load limits assume A53 Grade B pipe (Schedule 40 for standard end caps, Schedule 80 for the heavy-duty kit) and a minimum 45° horizontal top rigging angle. M&W recommends a minimum of 60°.
Standard Capacity Spreader Beam End Caps
|
Outside Spread / Working Load Limit (lbs.) with 45° or 60° Top Rigging |
| SKU |
4' |
5' |
6' |
8' |
10' |
12' |
14' |
15' |
16' |
18' |
20' |
22' |
24' |
26' |
28' |
30' |
32' |
34' |
36' |
| SBCP2.5 |
15,000 |
14,000 |
13,000 |
11,000 |
8,000 |
5,800 |
4,000 |
3,000 |
|
|
|
|
|
|
|
|
|
|
|
| SBCP5 |
34,000 |
34,000 |
34,000 |
34,000 |
34,000 |
32,000 |
30,000 |
28,000 |
26,000 |
24,000 |
20,000 |
16,000 |
14,000 |
12,000 |
10,000 |
9,000 |
|
|
|
| SBCP8 |
78,000 |
78,000 |
78,000 |
78,000 |
78,000 |
76,000 |
76,000 |
72,000 |
70,000 |
66,000 |
62,000 |
58,000 |
54,000 |
50,000 |
46,000 |
42,000 |
38,000 |
32,000 |
30,000 |
Heavy-Duty High Capacity Spreader Beam End Caps
|
Outside Spread / Working Load Limit (lbs.) with 45° or 60° Top Rigging |
| SKU |
6' |
8' |
10' |
15' |
20' |
25' |
30' |
35' |
40' |
| SBCP10.75-HD |
160,000 |
160,000 |
160,000 |
160,000 |
160,000 |
160,000 |
160,000 |
150,000 |
100,000 |
Need a matching sleeve for your heavy-duty end caps? We also carry the M&W sleeve for HD spreader beam pipe end caps.
Questions?
Not sure if this is the right choice for your application, or looking for a custom spreader beam that doesn't use pipe? Request a quote or contact our product experts.
We also carry a wide range of other lifting and rigging equipment to complete your setup, including shackles and lifting slings.