SKU: SUR2.56/11

Simpson SUR2.56/11 Joist Hanger Skewed Right - Galvanized

Simpson SUR2.56/11 Joist Hanger Skewed Right - Galvanized!

Skip to product information
1 of 2
$26.98
 
Request Bulk Pricing
Ships FREE Oct 14 when you add 8 to your cart
Fill out the form below or give our sales consultants a call at 866-421-4854.

Specifications

Finish: G90 Galvanized
Fasteners required: Face - (16) 0.162" x 3-1/2" Nails OR (16) SD9112 Screws Joist - (2) 0.148" x 1-1/2" Nails OR (2) SD9112 Screws
For Treated Lumber: No
Height: 11-3/16"
Joist size: 3X14
Manufacturer name: Simpson Strong-Tie
Width: 2-9/16"
Description

Simpson Strong-Tie SUR joist hangers are skewed 45 degrees right and utilize angled nail slots to direct nails for proper installation. The Strong-Tie SUR2.56/11 skewed joist hanger features a G90 galvanized coating and requires the use of hot-dip galvanized fasteners which meet the specifications of ASTM A153.


Installation:
  • Use all specified fasteners.
  • These hangers will normally accommodate a 40° to 50° skew.
  • Illustration shows left and right skews SUR/L (SUR=skewed right; SUL=skewed left).
  • The joist end may be square cut or bevel cut.

NOTE: The correct fasteners installed in the correct position must be used to achieve published load values


California Residents: WARNING

View full details
× WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects and other reproductive harm. For more information visit: www.P65Warnings.ca.gov.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)